scholarly journals Changes in soil quality in response to short-term application of municipal sewage sludge in a typic haplustept under cowpea-wheat cropping system

Author(s):  
Surajit Mondal ◽  
R.D. Singh ◽  
A.K. Patra ◽  
B.S. Dwivedi
2019 ◽  
Vol 8 (1) ◽  
Author(s):  
Nahid A.A. Siddig ◽  
Asma A. Ahmed ◽  
Sarra A.M. Saad ◽  
Faisal Hammad Mekky Koua

Municipal sewage sludge from wastewater treatment is an important nutritional source for sustainable agriculture. Here, we report on the assessment of the accumulation of heavy metals in Nile tilapia Oreochromis niloticus (Trewavas 1983) fed on earthworms Eisenia fetida reared on soil treated with different concentrations of sewage sludge (25% and 100%) during sludge-earthworm-fish short-term cycling. In this short-term cycling the Nile tilapia collected from the White Nile were chosen as final consumers, whereas the earthworms reared on loam soil mixed with different ratios of sludge were used as a feed for the final consumers. Our results indicate that the concentrations of Cd2+, Cr2+, Pb2+ and Zn2+ in the sludge treated soil are proportional to the sludge content in the soil. Importantly, the accumulation of these heavy metals was significantly low in the earthworms and the Nile tilapia in comparison with the treated soil and that these concentrations in the Nile tilapia were below the international limits recommended by the US Environmental Protection Agency (2014). Moreover, the growth and overall flesh quality of the fish were improved as indicated by the growth increase up to 146% when fed on earthworm reared in 100% sludge. Additionally, our physicochemical properties (i.e. pH, soil moisture, electric conductivity and organic matters) evaluation on the soil indicates an improvement of the soil quality when mixed with sewage sludge. These results suggest a sustainable application of sewage sludge in fish culture owing to its high nutritional values, low cost, and low risk of hazardous heavy metals when using primary consumers with heavy metals bioaccumulation capability such as E. fetida.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Barbara Klik ◽  
Zygmunt M. Gusiatin ◽  
Dorota Kulikowska

AbstractRemoval of heavy metals (HMs) from soil is a priority in soil washing/soil flushing. However, for further management of remediated soil, it should be characterized in detail. This study presents, for the first time, an evaluation of soil quality after column flushing with new-generation washing agents (WAs) recovered from municipal sewage sludge (dissolved organic matter, DOM; soluble humic-like substances, HLS; soluble humic substances, SHS) and Na2EDTA as a standard benchmark. Sandy loam soil was spiked with industrial levels of Cu, Pb and Zn, then flushed in a column reactor at two WA flow rates (0.5 and 1.0 ml/min). Soil quality was assessed by determining both physico-chemical (pH, total HMs and their mobility, soil organic matter, OM, humic substances, HS and their fractions, macroelements) and biological indicators (dehydrogenase activity, DHA; germination rate, GR; and inhibition factors for roots and shoots of Triticum aestivum). Total residual HMs contents and HMs contents in the mobile fraction were significantly lower in soil flushed at 1.0 ml/min than in soil flushed at 0.5 ml/min. With all WAs, the decrease in Cu content was larger than that of the other HMs, however this HM most effectively was removed with DOM. In contrast, Pb most effectively was removed by HLS and Na2EDTA, and DOM should not be used to remediate Pb-contaminated soil, due to its very low effectiveness. Flow rate did not appear to affect the fertilizing properties of the soil, DHA activity or soil toxicity indicators. Soil flushing with all SS_WAs increased OM, HS, and exchangeable P, K and Na content in remediated soils, but decreased exchangeable Ca content, and in most cases, exchangeable Mg content. Soil flushing substantially improved DHA activity and GR, but only slightly improved the shoot and root inhibition factors.


Agronomie ◽  
2001 ◽  
Vol 21 (2) ◽  
pp. 169-178 ◽  
Author(s):  
Giovanni Gigliotti ◽  
Pier Lodovico Giusquiani ◽  
Daniela Businelli

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3106
Author(s):  
Tomasz Kalak ◽  
Kinga Marciszewicz ◽  
Joanna Piepiórka-Stepuk

Recently, more and more attention has been paid to the removal of nickel ions due to their negative effects on the environment and human health. In this research, fly ash obtained as a result of incineration of municipal sewage sludge with the use of circulating fluidized bed combustion (CFBC) technology was used to analyze the possibility of removing Ni(II) ions in adsorption processes. The properties of the material were determined using analytical methods, such as SEM-EDS, XRD, BET, BJH, thermogravimetry, zeta potential, SEM, and FT-IR. Several factors were analyzed, such as adsorbent dose, initial pH, initial concentration, and contact time. As a result of the conducted research, the maximum sorption efficiency was obtained at the level of 99.9%. The kinetics analysis and isotherms showed that the pseudo-second order equation model and the Freundlich isotherm model best suited this process. In conclusion, sewage sludge fly ash may be a suitable material for the effective removal of nickel from wastewater and the improvement of water quality. This research is in line with current trends in the concepts of circular economy and sustainable development.


2014 ◽  
Vol 665 ◽  
pp. 404-407 ◽  
Author(s):  
Wan Yu ◽  
Pei Sheng Li

Moisture distribution in sewage sludge was considered as the essential of thermal drying. Some methods were given in literatures to test the moisture distribution, but there was no standard method to determine the critical water content between different kinds of water. The municipal sewage sludge was dried by hot air in this work. Based on the drying curve, the derivative of drying rate with respect to dry basis moisture content was brought out to analyze the moisture distribution in sewage sludge. Results show that this method can easily determine the free water, interstitial water, surface water and bound water with a high accuracy. The present work can provide new insight to determine the moisture distribution in sewage sludge, which was still lacking in the literatures.


2011 ◽  
Vol 383-390 ◽  
pp. 3799-3804
Author(s):  
Xiao Xu Fan ◽  
Lei Zhe Chu ◽  
Li Guo Yang

The fuel characteristics of municipal sewage sludge are suitable for dual fluidized bed(DFB) gasification, which can get middle calorific value gas through volatile pyrolysis, and reduce volume through char combustion. The hot test results of municipal sewage sludge on DFB rig were showen that the temperature distribution along combustor heigh is uniform, and the carbon content of fly ash is about 2~3%. In the experiment, with the increase of gasifier temperatrue, the more volatile of the sewage sludge was pyrolyzed. When the temperature of the gasifier reached 800°C, the calorific value of gas was 6.9MJ/Nm3; the emissions of SO2, NOx and HCl were appropriate to the standard. The leaching toxicity of heavy metal of the fly ash was lower than the discharge standard.


2013 ◽  
Vol 671-674 ◽  
pp. 2736-2741
Author(s):  
Yin An Ming ◽  
Tao Tao

To reuse municipal sewage sludge safely, experiment was carried out on grapefruit trees fertilized with composted sludge from Shiweitou Sewage Treatment Plant in Xiamen City of China, and a method was introduced of how to assess the environmental quality of grapefruit trees soil fertilized with sludge by Set Pair Analysis (SPA) model. The results showed that the soil in the surface layer (0-15cm) and the deeper layer (15-30cm) was less clean, and the environment of soil was not polluted. Thus it was feasible to use sludge as fruit fertilizer. The maximum service life of sludge for continuous land application was estimated by taking Cd as the limiting factor, which would provide scientific guide and technical support for safe land application of sludge.


Sign in / Sign up

Export Citation Format

Share Document