Enhancement of the enzymatic digestibility of sugarcane bagasse by alkali–peracetic acid pretreatment

2009 ◽  
Vol 44 (1) ◽  
pp. 17-23 ◽  
Author(s):  
Xuebing Zhao ◽  
Feng Peng ◽  
Keke Cheng ◽  
Dehua Liu
Detritus ◽  
2020 ◽  
pp. 106-113
Author(s):  
Longinus Ifeanyi Igbojionu ◽  
Cecilia Laluce ◽  
Edison Pecoraro

Sugarcane bagasse (SB) is made up of cellulose (32-43%), hemicellulose (19-34%) and lignin (14-30%). Due to high recalcitrant nature of SB, pretreatment is required to deconstruct its structure and enrich the cellulosic fraction. A two-stage NaOH and maleic acid pretreatment was applied to SB to enrich its cellulosic fraction. SB used in the present study is composed of cellulose (40.4 wt%), hemicellulose (20.9 wt%), lignin (22.5 wt%) and ash (4.0 wt%). After one-stage NaOH pretreatment, its cellulosic fraction increased to 61.8 wt% and later increased to 80.1 wt% after the second-stage acid pretreatment. Lignin fraction decreased to 3.0 wt% after one-stage NaOH pretreatment and remained unaffected after the acid pretreatment step. Hemicellulose fraction decreased substantially after the second-stage pretreatment with maleic acid. Pretreated SB displayed high crystallinity index and improved enzymatic digestibility. Hydrolysates of pretreated SB contained very low amount of xylose and subsequent fermentation by Saccharomyces cerevisiae -IQAr/45-1 resulted to ethanol level of 8.94 g/L. Maximal ethanol yield of 0.49 g/g (95.8% of theoretical yield) and productivity of 0.28 g/L/h was attained. At the same time, biomass yield and productivity of 0.47 g/g and 0.27 g/L/h respectively were obtained. Two-stage NaOH and maleic acid pretreatment led to ~ two-fold increase in cellulosic fraction and enhanced the enzymatic digestibility of SB up to 70.4%. The resulted enzymatic hydrolysate was efficiently utilized by S. cerevisiae -IQAr/45-1 to produce high yield of ethanol. Thus, optimization of enzymatic hydrolysis at low enzyme loading is expected to further improve the process and reduce cost.


2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Lin Dai ◽  
Tian Huang ◽  
Kankan Jiang ◽  
Xin Zhou ◽  
Yong Xu

Abstract Background Pretreatment is the key step for utilizing lignocellulosic biomass, which can extract cellulose from lignin and disrupt its recalcitrant crystalline structure to allow much more effective enzymatic hydrolysis; and organic acids pretreatment with dual benefic for generating xylooligosaccharides and boosting enzymatic hydrolysis has been widely used in adding values to lignocellulose materials. In this work, furoic acid, a novel recyclable organic acid as catalyst, was employed to pretreat sugarcane bagasse to recover the xylooligosaccharides fraction from hemicellulose and boost the subsequent cellulose saccharification. Results The FA-assisted hydrolysis of sugarcane bagasse using 3% furoic acid at 170 °C for 15 min resulted in the highest xylooligosaccharides yield of 45.6%; subsequently, 83.1 g/L of glucose was harvested by a fed-batch operation with a solid loading of 15%. Overall, a total of 120 g of xylooligosaccharides and 335 g glucose could be collected from 1000 g sugarcane bagasse starting from the furoic acid pretreatment. Furthermore, furoic acid can be easily recovered by cooling crystallization. Conclusion This work put forward a novel furoic acid pretreatment method to convert sugarcane bagasse into xylooligosaccharides and glucose, which provides a strategy that the sugar and nutraceutical industries can be used to reduce the production cost. The developed process showed that the yields of xylooligosaccharides and byproducts were controllable by shortening the reaction time; meanwhile, the recyclability of furoic acid also can potentially reduce the pretreatment cost and potentially replace the traditional mineral acids pretreatment.


2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Wenqian Lin ◽  
Jinlai Yang ◽  
Yayue Zheng ◽  
Caoxing Huang ◽  
Qiang Yong

Abstract Background During the dilute acid pretreatment process, the resulting pseudo-lignin and lignin droplets deposited on the surface of lignocellulose and inhibit the enzymatic digestibility of cellulose in lignocellulose. However, how these lignins interact with cellulase enzymes and then affect enzymatic hydrolysis is still unknown. In this work, different fractions of surface lignin (SL) obtained from dilute acid-pretreated bamboo residues (DAP-BR) were extracted by various organic reagents and the residual lignin in extracted DAP-BR was obtained by the milled wood lignin (MWL) method. All of the lignin fractions obtained from DAP-BR were used to investigate the mechanism for interaction between lignin and cellulase using surface plasmon resonance (SPR) technology to understand how they affect enzymatic hydrolysis Results The results showed that removing surface lignin significantly decreased the yield for enzymatic hydrolysis DAP-BR from 36.5% to 18.6%. The addition of MWL samples to Avicel inhibited its enzymatic hydrolysis, while different SL samples showed slight increases in enzymatic digestibility. Due to the higher molecular weight and hydrophobicity of MWL samples versus SL samples, a stronger affinity for MWL (KD = 6.8–24.7 nM) was found versus that of SL (KD = 39.4–52.6 nM) by SPR analysis. The affinity constants of all tested lignins exhibited good correlations (r > 0.6) with the effects on enzymatic digestibility of extracted DAP-BR and Avicel. Conclusions This work revealed that the surface lignin on DAP-BR is necessary for maintaining enzyme digestibility levels, and its removal has a negative impact on substrate digestibility.


2011 ◽  
Vol 35 (1) ◽  
pp. 663-670 ◽  
Author(s):  
George Jackson de Moraes Rocha ◽  
Carlos Martin ◽  
Isaias Barbosa Soares ◽  
Ana Maria Souto Maior ◽  
Henrique Macedo Baudel ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document