99/03239 Optimizing peracetic acid pretreatment conditions for improved simultaneous saccharification and co-fermentation (SSCF) of sugarcane bagasse t

1999 ◽  
Vol 40 (5) ◽  
pp. 340
Author(s):  
Majur Mading Makur ◽  
Tewodros Birhanu

It was estimated that crude oil production will begin to decline before 2010 from 25 to 5 billion in 2050. Many countries are depending on fossil fuel that causes shortage. Therefore, there is great need to explore the alternative means of fuel production from bagasse. The aim of the present paper is the production of low-cost simple sugars and ethanol from sugarcane bagasse. The paper provides important guidelines on how to produce sugars and ethanol from sugarcane bagasse. It also helps in determining the cheapest method, risk involve in process and chemicals applied. Sugarcane bagasse was pretreated by four different methods such as physico-chemical, chemical, biological pretreatments and hydrolysis. The processes of alkaline, dilute acid pretreatment (NaOH) and enzymatic hydrolysis were found to be the best for production of sugars while simultaneous saccharification and fermentation (SSF) for ethanol production.


2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Lin Dai ◽  
Tian Huang ◽  
Kankan Jiang ◽  
Xin Zhou ◽  
Yong Xu

Abstract Background Pretreatment is the key step for utilizing lignocellulosic biomass, which can extract cellulose from lignin and disrupt its recalcitrant crystalline structure to allow much more effective enzymatic hydrolysis; and organic acids pretreatment with dual benefic for generating xylooligosaccharides and boosting enzymatic hydrolysis has been widely used in adding values to lignocellulose materials. In this work, furoic acid, a novel recyclable organic acid as catalyst, was employed to pretreat sugarcane bagasse to recover the xylooligosaccharides fraction from hemicellulose and boost the subsequent cellulose saccharification. Results The FA-assisted hydrolysis of sugarcane bagasse using 3% furoic acid at 170 °C for 15 min resulted in the highest xylooligosaccharides yield of 45.6%; subsequently, 83.1 g/L of glucose was harvested by a fed-batch operation with a solid loading of 15%. Overall, a total of 120 g of xylooligosaccharides and 335 g glucose could be collected from 1000 g sugarcane bagasse starting from the furoic acid pretreatment. Furthermore, furoic acid can be easily recovered by cooling crystallization. Conclusion This work put forward a novel furoic acid pretreatment method to convert sugarcane bagasse into xylooligosaccharides and glucose, which provides a strategy that the sugar and nutraceutical industries can be used to reduce the production cost. The developed process showed that the yields of xylooligosaccharides and byproducts were controllable by shortening the reaction time; meanwhile, the recyclability of furoic acid also can potentially reduce the pretreatment cost and potentially replace the traditional mineral acids pretreatment.


2011 ◽  
Vol 35 (1) ◽  
pp. 663-670 ◽  
Author(s):  
George Jackson de Moraes Rocha ◽  
Carlos Martin ◽  
Isaias Barbosa Soares ◽  
Ana Maria Souto Maior ◽  
Henrique Macedo Baudel ◽  
...  

Detritus ◽  
2020 ◽  
pp. 106-113
Author(s):  
Longinus Ifeanyi Igbojionu ◽  
Cecilia Laluce ◽  
Edison Pecoraro

Sugarcane bagasse (SB) is made up of cellulose (32-43%), hemicellulose (19-34%) and lignin (14-30%). Due to high recalcitrant nature of SB, pretreatment is required to deconstruct its structure and enrich the cellulosic fraction. A two-stage NaOH and maleic acid pretreatment was applied to SB to enrich its cellulosic fraction. SB used in the present study is composed of cellulose (40.4 wt%), hemicellulose (20.9 wt%), lignin (22.5 wt%) and ash (4.0 wt%). After one-stage NaOH pretreatment, its cellulosic fraction increased to 61.8 wt% and later increased to 80.1 wt% after the second-stage acid pretreatment. Lignin fraction decreased to 3.0 wt% after one-stage NaOH pretreatment and remained unaffected after the acid pretreatment step. Hemicellulose fraction decreased substantially after the second-stage pretreatment with maleic acid. Pretreated SB displayed high crystallinity index and improved enzymatic digestibility. Hydrolysates of pretreated SB contained very low amount of xylose and subsequent fermentation by Saccharomyces cerevisiae -IQAr/45-1 resulted to ethanol level of 8.94 g/L. Maximal ethanol yield of 0.49 g/g (95.8% of theoretical yield) and productivity of 0.28 g/L/h was attained. At the same time, biomass yield and productivity of 0.47 g/g and 0.27 g/L/h respectively were obtained. Two-stage NaOH and maleic acid pretreatment led to ~ two-fold increase in cellulosic fraction and enhanced the enzymatic digestibility of SB up to 70.4%. The resulted enzymatic hydrolysate was efficiently utilized by S. cerevisiae -IQAr/45-1 to produce high yield of ethanol. Thus, optimization of enzymatic hydrolysis at low enzyme loading is expected to further improve the process and reduce cost.


2020 ◽  
Author(s):  
Lin Dai ◽  
Tian Huang ◽  
Kankan Jiang ◽  
Xin Zhou ◽  
Yong Xu

Abstract Background: Pretreatment is the key step for utilizing lignocellulosic biomass, which can extract cellulose from lignin and disrupt its recalcitrant crystalline structure to allow much more effective enzymatic hydrolysis; and organic acids pretreatment with dual benefic for generating xylooligosaccharides and boosting enzymatic hydrolysis has been widely used in adding values to lignocellulose materials. In this work, furoic acid, a novel recyclable organic acid as catalyst, was employed to pretreat sugarcane bagasse to recover the xylooligosaccharides fraction from hemicellulose and boost the subsequent cellulose saccharification. Results: The FA-assisted hydrolysis of sugarcane bagasse using 3% furoic acid at 170 oC for 15 min resulted in the highest xylooligosaccharides yield of 45.6%; subsequently, 83.1 g/L of glucose was harvested by a fed-batch operation with a solid loading of 15%. Overall, a total of 120 g of xylooligosaccharides and 335 g glucose could be collected from 1000 g sugarcane bagasse starting from the furoic acid pretreatment. Furthermore, furoic acid can be easily recovered by cooling crystallization.Conclusion: This work put forward a novel furoic acid pretreatment method to convert sugarcane bagasse into xylooligosaccharides and glucose, which provides a strategy that the sugar and nutraceutical industries can be used to reduce the production cost. The developed process showed that the yields of xylooligosaccharides and byproducts were controllable by shortening the reaction time; meanwhile, the recyclability of furoic acid also can potentially reduce the pretreatment cost and potentially replace the traditional mineral acids pretreatment.


Sign in / Sign up

Export Citation Format

Share Document