An experimental study for carbonate reservoirs on the impact of CO2-EOR on petrophysics and oil recovery

Fuel ◽  
2019 ◽  
Vol 235 ◽  
pp. 1019-1038 ◽  
Author(s):  
Mohamed Khather ◽  
Ali Saeedi ◽  
Matthew B. Myers ◽  
Michael Verrall
2019 ◽  
Vol 10 (3) ◽  
pp. 1127-1135
Author(s):  
Tereza Neuma de Castro Dantas ◽  
Andrey Costa de Oliveira ◽  
Tamyris Thaise Costa de Souza ◽  
Cláudio Regis dos Santos Lucas ◽  
Edson de Andrade Araújo ◽  
...  

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Daigang Wang ◽  
Jingjing Sun

Abstract Cyclic water huff and puff (CWHP) has proven to be an attractive alternative to improve oil production performance after depletion-drive recovery in fractured-vuggy carbonate reservoirs. However, due to the impact of strong heterogeneity, multiple types of fractured-vuggy medium, poor connectivity, complex flow behaviors and oil-water relationship, CWHP is merely suitable for specific types of natural fractured-vuggy medium, usually causing a great difference in actual oil-yielding effect. It remains a great challenge for accurate evaluation of CWHP adaptability and quantitative prediction of production performance in fractured-vuggy carbonate reservoir, which severely restricts the application of CWHP. For this study, we firstly enable the newly developed fuzzy grey relational analysis to quantify the adaptability of CWHP. With production history of several targeted producers, the accuracy of the proposed method is validated. Based on the traditional percolation theory and waterflood mechanisms in various types of fractured-vuggy medium, a quantitative prediction model for cyclic water cut fwp and increased recovery factor ΔR is presented. The CWHP production performance is discussed by using the Levenberg-Marquardt algorithm for history matching. With a better understanding of the fwp ~ ΔR curve characteristics in different types of fractured-vuggy medium, proper strategies or measures for potential-tapping remaining oil are provided. This methodology can also offer a good basis for engineers and geologists to develop other similar reservoirs with high efficiency.


Author(s):  
Sepideh Palizdan ◽  
Hossein Doryani ◽  
Masoud Riazi ◽  
Mohammad Reza Malayeri

In-situ emulsification of injected brines of various types is gaining increased attention for the purpose of enhanced oil recovery. The present experimental study aims at evaluating the impact of injecting various solutions of Na2CO3 and MgSO4 at different flow rates resembling those in the reservoir and near wellbore using a glass micromodel with different permeability regions. Emulsification process was visualized through the injection of deionized water and different brines at different flow rates. The experimental results showed that the extent of emulsions produced in the vicinity of the micromodel exit was profoundly higher than those at the entrance of the micromodel. The injection of Na2CO3 brine after deionized water caused the impact of emulsification process more efficiently for attaining higher oil recovery than that for the MgSO4 brine. For instance, the injection of MgSO4 solution after water flooding increased oil recovery only up to 1%, while the equivalent figure for Na2CO3 was 28%. It was also found that lower flow rate of injection would cause the displacement front to be broadened since the injected fluid had more time to interact with the oil phase. Finally, lower injection flow rate reduced the viscous force of the displacing fluid which led to lesser occurrence of viscous fingering phenomenon.


Sign in / Sign up

Export Citation Format

Share Document