Frequency response and spatial resolution of a thin foil for heat transfer measurements using infrared thermography

2009 ◽  
Vol 52 (21-22) ◽  
pp. 5040-5045 ◽  
Author(s):  
Hajime Nakamura
Keyword(s):  
Heat Transfer ◽  
Frequency Response ◽  
Infrared Thermography ◽  
Spatial Resolution ◽  
Thin Foil

Precipitation in silicon: Microanalysis

1988 ◽  
Vol 46 ◽  
pp. 474-475
Author(s):  
R.W. Carpenter
Keyword(s):  
Transition Metals ◽  
Spatial Resolution ◽  
Thin Foil ◽  
Precipitation Reaction ◽  
High Current ◽  
Reaction Products ◽  
Carbon And Nitrogen ◽  
Dielectric Layers ◽  
Precipitation Processes ◽  
Areas Of Interest

Interest in precipitation processes in silicon appears to be centered on transition metals (for intrinsic and extrinsic gettering), and oxygen and carbon in thermally aged materials, and on oxygen, carbon, and nitrogen in ion implanted materials to form buried dielectric layers. A steadily increasing number of applications of microanalysis to these problems are appearing. but still far less than the number of imaging/diffraction investigations. Microanalysis applications appear to be paced by instrumentation development. The precipitation reaction products are small and the presence of carbon is often an important consideration. Small high current probes are important and cryogenic specimen holders are required for consistent suppression of contamination buildup on specimen areas of interest. Focussed probes useful for microanalysis should be in the range of 0.1 to 1nA, and estimates of spatial resolution to be expected for thin foil specimens can be made from the curves shown in Fig. 1.

Influence of Radial Rotation on Heat Transfer in a Rectangular Channel With Two Opposite Walls Roughened by Hemispherical Protrusions at High Rotation Numbers

2011 ◽  
Vol 134 (1) ◽  
Author(s):  
Shyy Woei Chang ◽  
Tong-Miin. Liou ◽  
Wei-Chun Chen
Keyword(s):  
Heat Transfer ◽  
Infrared Thermography ◽  
Rotation Number ◽  
Rectangular Channel ◽  
Flow Region ◽  
Transfer Data ◽  
Nusselt Numbers ◽  
Rotation Numbers ◽  
Heat Transfer Correlations ◽  
Rotating Channel

Detailed heat transfer distributions over two opposite leading and trailing walls roughened by hemispherical protrusions were measured from a rotating rectangular channel at rotation number up to 0.6 to examine the effects of Reynolds (Re), rotation (Ro), and buoyancy (Bu) numbers on local and area-averaged Nusselt numbers (Nu and Nu¯) using the infrared thermography. A set of selected heat transfer data illustrates the Coriolis and rotating buoyancy effects on the detailed Nu distributions and the area-averaged heat transfer performances of the rotating channel. The Nu¯ for the developed flow region on the leading and trailing walls are parametrically analyzed to devise the empirical heat transfer correlations that permit the evaluation of the interdependent and individual Re, Ro, and Bu effect on Nu¯.

Numerical analysis of wave-type heat transfer propagating in a thin foil irradiated by short-pulsed laser

2003 ◽  
Vol 46 (21) ◽  
pp. 4083-4095 ◽  
Author(s):  
Eiji Hoashi ◽  
Takehiko Yokomine ◽  
Akihiko Shimizu ◽  
Tomoaki Kunugi
Keyword(s):  
Heat Transfer ◽  
Numerical Analysis ◽  
Pulsed Laser ◽  
Thin Foil ◽  
Wave Type

Heat Transfer Measurements in an Internal Cooling System Using a Transient Technique With Infrared Thermography

2012 ◽  
Author(s):  
Christian Egger ◽  
Jens von Wolfersdorf ◽  
Martin Schnieder
Keyword(s):  
Heat Transfer ◽  
Data Analysis ◽  
Infrared Thermography ◽  
Outer Surface ◽  
Cooling System ◽  
Internal Cooling ◽  
Test Model ◽  
Cooling Channel ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients

In this paper a transient method for measuring heat transfer coefficients in internal cooling systems using infrared thermography is applied. The experiments are performed with a two-pass internal cooling channel connected by a 180° bend. The leading edge and the trailing edge consist of trapezoidal and nearly rectangular cross sections, respectively, to achieve an engine-similar configuration. Within the channels rib arrangements are considered for heat transfer enhancement. The test model is made of metallic material. During the experiment the cooling channels are heated by the internal flow. The surface temperature response of the cooling channel walls is measured on the outer surface by infrared thermography. Additionally, fluid temperatures as well as fluid and solid properties are determined for the data analysis. The method for determining the distribution of internal heat transfer coefficients is based on a lumped capacitance approach which considers lateral conduction in the cooling system walls as well as natural convection and radiation heat transfer on the outer surface. Because of time-dependent effects a sensitivity analysis is performed to identify optimal time periods for data analysis. Results are compared with available literature data.

A Pulsed Wire Probe for the Measurement of Velocity and Flow Direction in Slowly Moving Air

1984 ◽  
Vol 106 (1) ◽  
pp. 72-78 ◽  
Author(s):  
D. E. Olson ◽  
K. H. Parker ◽  
B. Snyder
Keyword(s):  
Heat Transfer ◽  
Theoretical Model ◽  
Spatial Resolution ◽  
Flow Direction ◽  
Three Dimensional ◽  
Velocity Fields ◽  
Transport Time ◽  
Wire Probe ◽  
Circular Pipes ◽  
Measured Flow

This report describes the theory and operation of a pulsed-probe anemometer designed to measure steady three-dimensional velocity fields typical of pulmonary tracheo-bronchial airflows. Local velocities are determined by measuring the transport time and orientation of a thermal pulse initiated at an upstream wire and sensed at a downstream wire. The transport time is a reproducible function of velocity and the probe wire spacing, as verified by a theoretical model of convective heat transfer. When calibrated the anemometer yields measurements of velocity accurate to ±5 percent and resolves flow direction to within 1 deg at airspeeds ≥10 cm/s. Spatial resolution is ±0.5 mm. Measured flow patterns typical of curved circular pipes are included as examples of its application.

scholarly journals Experimental Estimation of Temporal and Spatial Resolution of Coefficient of Heat Transfer in a Channel Using Inverse Heat Transfer Method

2019 ◽  
Author(s):  
Majid Karami ◽  
Somayeh Davoodabadi Farahani ◽  
Farshad Kowsary ◽  
Amir Mosavi
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Spatial Resolution ◽  
Time History ◽  
Inverse Technique ◽  
Inverse Heat Transfer ◽  
Temporal And Spatial ◽  
Transfer Method

In this research, a novel method to investigation the transient heat transfer coefficient in a channel is suggested experimentally, in which the water flow, itself, is considered both just liquid phase and liquid-vapor phase. The experiments were designed to predict the temporal and spatial resolution of Nusselt number. The inverse technique method is non-intrusive, in which time history of temperature is measured, using some thermocouples within the wall to provide input data for the inverse algorithm. The conjugate gradient method is used mostly as an inverse method. The temporal and spatial changes of heat flux, Nusselt number, vapor quality, convection number, and boiling number have all been estimated, showing that the estimated local Nusselt numbers of flow for without and with phase change are close to those predicted from the correlations of Churchill and Ozoe (1973) and Kandlikar (1990), respectively. This study suggests that the extended inverse technique can be successfully utilized to calculate the local time-dependent heat transfer coefficient of boiling flow.

Sign in / Sign up

Export Citation Format

Share Document