Self-consistent surface-temperature boundary condition for liquefying-fuel-based hybrid rockets internal-ballistics simulation

Author(s):  
Carmine Carmicino ◽  
Giuseppe Gallo ◽  
Raffaele Savino
2010 ◽  
Vol 49 (7) ◽  
pp. 1496-1516 ◽  
Author(s):  
Vijayant Kumar ◽  
Gunilla Svensson ◽  
A. A. M. Holtslag ◽  
Charles Meneveau ◽  
Marc B. Parlange

Abstract The impact of surface flux boundary conditions and geostrophic forcing on multiday evolution of flow in the atmospheric boundary layer (ABL) was assessed using large-eddy simulations (LES). The LES investigations included several combinations of surface boundary conditions (temperature and heat flux) and geostrophic forcing (constant, time varying, time and height varying). The setup was based on ABL characteristics observed during a selected period of the Cooperative Atmosphere–Surface Exchange Study—1999 (CASES-99) campaign. The LES cases driven by a constant geostrophic wind achieved the best agreement with the CASES-99 observations specifically in terms of daytime surface fluxes and daytime and nighttime profiles. However, the nighttime fluxes were significantly overestimated. The LES cases with the surface temperature boundary condition and driven by a time- and height-varying geostrophic forcing showed improved agreement with the observed nighttime fluxes, but there was less agreement with other observations (e.g., daytime profiles). In terms of the surface boundary condition, the LES cases driven by either surface temperature or heat fluxes produced similar trends in terms of the daytime profiles and comparisons with data from soundings. However, in reproducing the fluxes and nighttime profiles, the agreement was better with imposed temperature because of its ability to interact dynamically with the air temperature field. Therefore, it is concluded that surface temperature boundary condition is better suited for simulations of temporally evolving ABL flow as in the diurnal evolution of the ABL.


2017 ◽  
Vol 56 (11) ◽  
pp. 2963-2980 ◽  
Author(s):  
Xiaoxue Wang ◽  
Yuguo Li ◽  
Kai Wang ◽  
Xinyan Yang ◽  
Pak Wai Chan

AbstractThe atmospheric boundary exhibits an obvious diurnal cycle. The daily cycle of climate variation has a significant effect on urban airflow, and an understanding of it is very important for city-scale environmental control. A new and simple daily cycle temperature boundary condition for simulations of urban airflows with computational fluid dynamics (CFD) is described herein. An analytical surface temperature formula was obtained after simplifying longwave radiation and sensible heat flux terms. The formula provides a reasonably good prediction of ground surface temperatures on sunny days without adding much complexity. The accuracy of the prediction of daily surface temperature variations in homogeneous soils was evaluated with a benchmark experiment and with weather station data. The new boundary condition was implemented in the commercial CFD software Fluent for a city-scale model. The implementation demonstrates the importance of including diurnal temperature profiles and atmospheric boundary conditions in CFD simulations of urban plumes in which an ideal urban heat island circulation occurs.


2018 ◽  
Vol 21 (4) ◽  
pp. 901-918 ◽  
Author(s):  
Sabrina Roscani ◽  
Domingo Tarzia

Abstract A one-dimensional fractional one-phase Stefan problem with a temperature boundary condition at the fixed face is considered by using the Riemann–Liouville derivative. This formulation is more convenient than the one given in Roscani and Santillan (Fract. Calc. Appl. Anal., 16, No 4 (2013), 802–815) and Tarzia and Ceretani (Fract. Calc. Appl. Anal., 20, No 2 (2017), 399–421), because it allows us to work with Green’s identities (which does not apply when Caputo derivatives are considered). As a main result, an integral relationship between the temperature and the free boundary is obtained which is equivalent to the fractional Stefan condition. Moreover, an exact solution of similarity type expressed in terms of Wright functions is also given.


Numerous reports from several parts of the world have confirmed that on calm clear nights a minimum in air temperature can occur just above ground, at heights of the order of 12 m or less. This phenomenon, first observed by Ramdas & Atmanathan (1932), carries the associated paradox of an apparently unstable layer that sustains itself for several hours, and has not so far been satisfactorily explained. We formulate here a theory that considers energy balance between radiation, conduction and free or forced convection in humid air, with surface temperature, humidity and wind incorporated into an appropriate mathematical model as parameters. A complete numerical solution of the coupled air—soil problem is used to validate an approach that specifies the surface temperature boundary condition through a cooling rate parameter. Utilizing a flux-emissivity scheme for computing radiative transfer, the model is numerically solved for various values of turbulent friction velocity. It is shown that a lifted minimum is predicted by the model for values of ground emissivity not too close to unity, and for sufficiently low surface cooling rates and eddy transport. Agreement with observation for reasonable values of the parameters is demonstrated. A heuristic argument is offered to show that radiation substantially increases the critical Rayleigh number for convection, thus circumventing or weakening Rayleigh-Benard instability. The model highlights the key role played by two parameters generally ignored in explanations of the phenomenon, namely surface emissivity and soil thermal conductivity, and shows that it is unnecessary to invoke the presence of such particulate constituents as haze to produce a lifted minimum.


Author(s):  
Taehyun Park ◽  
Thomas J. Zimmerman ◽  
Daniel Park ◽  
Brooks Lowrey ◽  
Michael C. Murphy

A novel method of thermoplastic fusion bonding (TPFB), or thermal bonding, for polymer fluidic devices was demonstrated. A pressure cooker was used in a simple sealing and packaging process with precise control of the critical parameters. Polymer devices were enclosed in a vacuum-sealed polymer container. This produced an even pressure distribution and a precise temperature boundary condition over the whole surface of the device. Deformation indicators were integrated on the devices to provide a rapid means of checking deformation and pressure distribution with the naked eye. Temperature, pressure, and time are the fundamental parameters of TPFB. The temperature and pressure are dominated by the material and contact area of the device. The temperature and pressure can be manipulated by controlling the water vapor pressure. The boiling solution guarantees an accurate, constant temperature boundary condition. Time can be eliminated as a variable by choosing a sufficient time to achieve good bonding, since there was no apparent damage to the microstructures after one hour. This new method of TPFB was demonstrated for sealing and packaging a PMMA (polymethylmethacrylate) microfluidic device. Good results were obtained using the vacuum sealed polymer container in the pressure cooker. This method is also suitable for scaling up for mass production.


Sign in / Sign up

Export Citation Format

Share Document