Influence of zinc borate on the flame retardancy and thermal stability of intumescent flame retardant polypropylene composites

2015 ◽  
Vol 115 ◽  
pp. 224-232 ◽  
Author(s):  
Caimin Feng ◽  
Yi Zhang ◽  
Dong Liang ◽  
Siwei Liu ◽  
Zhenguo Chi ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Intumescent Flame Retardant ◽  
Zinc Borate ◽  
Polypropylene Composites ◽  
Thermal Stability Of

Preparation of lignin–silica hybrids and its application in intumescent flame-retardant poly(lactic acid) system

2012 ◽  
Vol 24 (8) ◽  
pp. 738-746 ◽  
Author(s):  
Rui Zhang ◽  
Xifu Xiao ◽  
Qilong Tai ◽  
Hua Huang ◽  
Jian Yang ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Lactic Acid ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Photoelectron Spectroscopy ◽  
Intumescent Flame Retardant ◽  
Poly Lactic Acid ◽  
Limiting Oxygen Index ◽  
Silica Hybrids ◽  
Thermal Stability Of

Lignin–silica hybrids (LSHs) were prepared by sol–gel method and characterized by Fourier transform infrared (FT-IR) spectra, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). LSH and ammonium polyphosphate (APP) were added into poly(lactic acid) (PLA) as a novel intumescent flame-retardant (IFR) system to improve the flame retardancy of PLA. The flame-retardant effect of APP and LSH in PLA was studied using limiting oxygen index (LOI), vertical burning (UL-94) tests and cone calorimeter. The thermal stability of PLA/APP/LSH composites was evaluated by thermogravimetric analysis (TGA). Additionally, the morphology and components of char residues of the IFR-PLA composites were investigated by SEM and XPS. With the addition of APP/LSH to PLA system, the morphology of the char residue has obviously changed. Compared with PLA/APP and PLA/APP/lignin, a continuous and dense intumescent charring layer with more phosphor in PLA composites is formed, which exhibits better flame retardancy. All the results show that the combination of APP and LSH can improve the flame-retardant property and increase the thermal stability of PLA composites greatly.

scholarly journals Study of the Synergistic Effect of Nanoporous Nickel Phosphates on Novel Intumescent Flame Retardant Polypropylene Composites

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Shibin Nie ◽  
Chi Zhang ◽  
Chao Peng ◽  
De-yi Wang ◽  
Daowei Ding ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Intumescent Flame Retardant ◽  
The Novel ◽  
Polypropylene Composites ◽  
Pp Composites ◽  
Flame Retardant Properties ◽  
Microencapsulated Ammonium Polyphosphate ◽  
Thermal Stability Of ◽  
Nickel Phosphates ◽  
Limited Oxygen

A char forming agent (CFA) and silica-gel microencapsulated ammonium polyphosphate (Si-MCAPP) were selected to form novel intumescent flame retardant system to prepare flame retardant polypropylene (PP) composites, and then the influences of nanoporous nickel phosphates (NiP) on the thermal and flame retardant properties of flame retardant PP composites were studied by the real time FTIR (RTFTIR) spectra, limited oxygen index (LOI) test, and the scanning electron microscopy. RTFTIR shows the addition of NiP can improve the thermal stability of flame retardant PP composites. LOI test shows LOI value is increased with the increase of the content of NiP, and the optimized concentration of NiP is 1.0%. Furthermore, smoke toxicity of the novel flame retardant PP composites was studied by mice experiment. The upper limit of the no death smoke concentration of the composite is 12.37 mg/L.

scholarly journals Investigation of the Structure-Property Effect of Phosphorus-Containing Polysulfone on Decomposition and Flame Retardant Epoxy Resin Composites

Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 380 ◽  
Author(s):  
Wei Zhao ◽  
Yongxiang Li ◽  
Qiushi Li ◽  
Yiliang Wang ◽  
Gong Wang
Keyword(s):  
Thermal Stability ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Phosphorus Content ◽  
Structure Property ◽  
Scanning Calorimetry ◽  
Inhibition Effect ◽  
Phosphorus Containing ◽  
High Degree ◽  
Thermal Stability Of

The flame retardant modification of epoxy (EP) is of great signification for aerospace, automotive, marine, and energy industries. In this study, a series of EP composites containing different variations of phosphorus-containing polysulfone (with a phosphorus content of approximately 1.25 wt %) were obtained. The obtained EP/polysulfone composites had a high glass transition temperature (Tg) and high flame retardancy. The influence of phosphorus-containing compounds (ArPN2, ArPO2, ArOPN2 and ArOPO2) on the thermal properties and flame retardancy of EP/polysulfone composites was investigated by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), a UL-94 vertical burning test, and cone calorimeter tests. The phosphorus-containing polysulfone enhanced the thermal stability of EP. The more stable porous char layer, less flammable gases, and a lower apparent activation energy at a high degree of conversion demonstrated the high gas inhibition effect of phosphorus-containing compounds. Moreover, the gas inhibition effect of polysulfone with a P–C bond was more efficient than the polysulfone with a P–O–C bond. The potential for optimizing flame retardancy while maintaining a high Tg is highlighted in this study. The flame-retardant EP/polysulfone composites with high thermal stability broaden the application field of epoxy.

scholarly journals Synthesis of a Novel Phosphorous-Nitrogen Based Charring Agent and Its Application in Flame-retardant HDPE/IFR Composites

Polymers ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 1062 ◽  
Author(s):  
Junlei Chen ◽  
Jihui Wang ◽  
Aiqing Ni ◽  
Hongda Chen ◽  
Penglong Shen
Keyword(s):  
Thermal Stability ◽  
Heat Release ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Fire Hazard ◽  
Weight Ratio ◽  
Charring Agent ◽  
Migration Percentage ◽  
Ul 94 ◽  
Thermal Stability Of

In this work, a novel phosphorous–nitrogen based charring agent named poly(1,3-diaminopropane-1,3,5-triazine-o-bicyclic pentaerythritol phosphate) (PDTBP) was synthesized and used to improve the flame retardancy of high-density polyethylene (HDPE) together with ammonium polyphosphate (APP). The results of Fourier transform infrared spectroscopy (FTIR) and 13C solid-state nuclear magnetic resonance (NMR) showed that PDTBP was successfully synthesized. Compared with the traditional intumescent flame retardant (IFR) system contained APP and pentaerythritol (PER), the novel IFR system (APP/PDTBP, weight ratio of 2:1) could significantly promote the flame retardancy, water resistance, and thermal stability of HDPE. The HDPE/APP/PDTBP composites (PE3) could achieve a UL-94 V-0 rating with LOI value of 30.8%, and had a lower migration percentage (2.2%). However, the HDPE/APP/PER composites (PE5) had the highest migration percentage (4.7%), lower LOI value of 23.9%, and could only achieve a UL-94 V-1 rating. Besides, the peak of heat release rate (PHRR), total heat release (THR), and fire hazard value of PE3 were markedly decreased compared to PE5. PE3 had higher tensile strength and flexural strength of 16.27 ± 0.42 MPa and 32.03 ± 0.59 MPa, respectively. Furthermore, the possible flame-retardant mechanism of the APP/PDTBP IFR system indicated that compact and continuous intumescent char layer would be formed during burning, thus inhibiting the degradation of substrate material and improving the thermal stability of HDPE.

Synthesis and Application of a Novel Intumescent Flame Retardant Containing Ferrocenyl

2014 ◽  
Vol 1033-1034 ◽  
pp. 931-936
Author(s):  
Cong Yan Chen ◽  
Rui Lan Fan ◽  
Guan Qun Yun
Keyword(s):  
Thermal Stability ◽  
Flame Retardant ◽  
Flame Retardants ◽  
Intumescent Flame Retardant ◽  
Limiting Oxygen Index ◽  
Good Thermal Stability ◽  
H Nmr ◽  
Positive Effect ◽  
Thermal Stability Of ◽  
Phosphate Groups

A novel intumescent flame retardant (IFR) containing ferrocene and caged bicyclic phosphate groups, 1-oxo-4-[4'-(ferrocene carboxylic acid phenyl ester)] amide-2, 6, 7-trioxa-1-phosphabicyclo- [2.2.2] octane (PFAM), was successfully synthesized. The synthesized PFAM were added to flammable polyurethane (PU) as flame retardants and smoke suppressants. The structure of PFAM was characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (1H NMR) and elemental analysis. Thermal stability of PFAM was tested by themogravimetric analysis (TGA). The results revealed that PFAM had good thermal stability and high char weight, the char weight up to 54% at 600 °C. Flammability properties of PU/PFAM composites were investigated by limiting oxygen index (LOI) test and UL-94 test, respectively. The results of LOI tests showed that the addition of PFAM enhanced flame retardancy of PU. When the content of PFAM reaches to 3%, the LOI value is 22.2. The morphologies of the char for PU and PU/3% PFAM composite can be obtained after LOI testing were examined by SEM. The results demonstrated that PFAM could promote to form the compact and dense intumescent char layer. Experiments showed that, the PFAM application of polyurethane showed positive effect.

Effect of Fumed Silica and Zinc Borate on the Thermogravimetric Analysis Curves of ABS/Magnesium Hydroxide Composite

2014 ◽  
Vol 599-601 ◽  
pp. 183-186
Author(s):  
Zhang Ting Li ◽  
Yue Qun Lu ◽  
Li Li Fan ◽  
Pei Bang Dai ◽  
Xia Su ◽  
...  
Keyword(s):  
Mechanical Property ◽  
Thermal Stability ◽  
Flame Retardant ◽  
Fumed Silica ◽  
Acrylonitrile Butadiene Styrene ◽  
Zinc Borate ◽  
Processing Temperature ◽  
Great Decrease ◽  
Thermal Stability Of ◽  
Butadiene Styrene

For achieving sufficient flame retardancy, high magnesim hydroxide (MH) content is needed in MH flame retardant Acrylonitrile-butadiene-styrene copolymer (ABS) composites (ABS/MH), which will cause a great decrease in mechanical property and difficulty in preparing samples for measurement. We prepared ABS/MH filled high 60.0% flame retardant by compounding ABS and modified flame retardant MH, fumed silica (SiO2) and zinc borate (ZB) via TX-10 phosphate/polyacrylate latex and studied the effect of a small amount of SiO2 and ZB with MH in ABS for improving the thermal decomposition of ABS/MH. The thermal stability of the modified flame retardant could meet the processing temperature of ABS. The incorporation of ZB, SiO2 or SiO2/ZB could improve the thermal stability of ABS/MH.

Sign in / Sign up

Export Citation Format

Share Document