AbstractContinuous Fiber Reinforced Thermoplastic (CFRT) hybrid parts offer interesting possibilities for lightweight application, which can exceed the capabilities of mono material metal or CFRT parts. In this case, the joining technology oftentimes is the limiting factor. This study investigates a joining operation with metal pin structures which are additively manufactured via powder bed fusion featuring different diameters and tip geometries, which are inserted into the locally infrared heated CFRT part. The resulting fiber rearrangement is assessed using transmitted light microscopy, confocal laser scanning microscopy as well as micro-computer-tomography. It could be shown that for all assessed pin variants a similar distinct fiber displacement can be seen and that the pin diameter has a significant effect on the resulting fiber orientation with smaller pin diameters being advantageous because of gentle fiber displacement and reduced undulation. The tip geometry has only minor effect on the fiber orientation. Especially in the X/Y plane no systematic influence of the tip geometry on the fiber displacement could be observed. Based on the gained insights a three-stage model of the fiber orientation processes is proposed.
Joining of Continuous Fiber Reinforced Thermoplastic/Steel hybrid parts via undercutting pin structures and infrared heating
