scholarly journals Sea otter carrying capacity in a soft- and mixed-sediment benthic habitat

2021 ◽  
Vol 542-543 ◽  
pp. 151602
Author(s):  
Ian P. Davis ◽  
Timothy M. Dellapenna ◽  
Gary E. Maale ◽  
Francis P. Gelwick ◽  
Frederick C. Weltz ◽  
...  
Author(s):  
Ian Davis ◽  
Timpthy Dellapenna ◽  
Gary Maale ◽  
Francis Gelwick ◽  
Fred Selts ◽  
...  

Identifying factors that influence sea otter (Enhydra lutris) population density can provide insight into why it varies spatially and temporally and when a recovering population has reached an equilibrium density because of food resources (i.e., carrying capacity K). Although food availability is widely recognized as an important extrinsic factor affecting sea otter density, how do we determine when a population has reached K? The goal of this study was to estimate K for Simpson Bay, Alaska by measuring the abundance of edible bivalves, the primary prey for sea otters for over 40 years. We then compared prey abundance and estimated replacement rate (i.e., the mean age of bivalves predated by sea otters) to estimated annual prey consumption based on the mean population density for the past 18 years. On average, 110 adult sea otters (5.2 km−2) have occupied Simpson Bay annually since 2001 consuming an estimated 176,660 kg of bivalves. The total mass (standing stock) of the major bivalves (predominately butter clams and stained macomas) was 785,730 kg, so adult sea otters consumed about 22% annually. Based on these observations and calculations, the estimated annual number of sea otters occupying Simpson Bay appears to be at or near K based on the replacement rate of food resources. However, other intrinsic (e.g., male territoriality and emigration) and extrinsic (e.g., predation, disease, human-related mortality) factors may influence equilibrium density, which varies spatially and temporally, resulting in a mosaic of subpopulations with different densities, rates of growth and discontinuous distributions. Understanding the balance among these factors may be one of the most challenging ecological questions for sea otter conservation and management as populations recover from their range-wide decimation during the Maritime Fur Trade in the late 18th and 19th centuries


Ecosystems ◽  
2021 ◽  
Author(s):  
Erin Slade ◽  
Iain McKechnie ◽  
Anne K. Salomon

AbstractThe historic extirpation and subsequent recovery of sea otters (Enhydra lutris) have profoundly changed coastal social-ecological systems across the northeastern Pacific. Today, the conservation status of sea otters is informed by estimates of population carrying capacity or growth rates independent of human impacts. However, archaeological and ethnographic evidence suggests that for millennia, complex hunting and management protocols by Indigenous communities limited sea otter abundance near human settlements to reduce the negative impacts of this keystone predator on shared shellfish prey. To assess relative sea otter prevalence in the Holocene, we compared the size structure of ancient California mussels (Mytilus californianus) from six archaeological sites in two regions on the Pacific Northwest Coast, to modern California mussels at locations with and without sea otters. We also quantified modern mussel size distributions from eight locations on the Central Coast of British Columbia, Canada, varying in sea otter occupation time. Comparisons of mussel size spectra revealed that ancient mussel size distributions are consistently more similar to modern size distributions at locations with a prolonged absence of sea otters. This indicates that late Holocene sea otters were maintained well below carrying capacity near human settlements as a result of human intervention. These findings illuminate the conditions under which sea otters and humans persisted over millennia prior to the Pacific maritime fur trade and raise important questions about contemporary conservation objectives for an iconic marine mammal and the social-ecological system in which it is embedded.


2020 ◽  
Vol 9 (1) ◽  
pp. 32-37
Author(s):  
Ruslan Hidayat ◽  
Saiful Arfaah

One of the most important factors in the structure of the pile foundation in the construction of the bridge is the carrying capacity of the soil so as not to collapse. Construction of a bridge in the village of Klitik in Jombang Regency to be built due to heavy traffic volume. The foundation plan to be used is a pile foundation with a diameter of 50 cm, the problem is what is the value of carrying capacity of soil and material. The equipment used is the Dutch Cone Penetrometer with a capacity of 2.50 tons with an Adhesion Jacket Cone. The detailed specifications of this sondir are as follows: Area conus 10 cm², piston area 10 cm², coat area 100 cm², as for the results obtained The carrying capacity of the soil is 60.00 tons for a diameter of 30 cm, 81,667 tons for a diameter of 35 cm, 106,667 tons for a diameter of 40 cm, 150,000 tons for a diameter of 50 cm for material strength of 54,00 tons for a diameter of 30 cm, 73,500 tons for a diameter of 35 cm, 96,00 tons for a diameter of 40 cm, 166,666 tons for a diameter of 50 cm


2020 ◽  
Vol 655 ◽  
pp. 123-137
Author(s):  
TM Grimes ◽  
MT Tinker ◽  
BB Hughes ◽  
KE Boyer ◽  
L Needles ◽  
...  

Protective legislation and management have led to an increase in California’s sea otter Enhydra lutris nereis population. While sea otter recovery has been linked to ecosystem benefits, sea otter predation may negatively affect commercially valuable species. Understanding the potential influence of sea otters is of particular importance as their range expands into estuaries that function as nurseries for commercially valuable species like Dungeness crab Metacarcinus magister. We consider how sea otter predation has affected the abundance and size of juvenile Dungeness crab in Elkhorn Slough, California, USA, and analyzed cancrid crab abundance and size across 4 California estuaries with and without sea otters to understand how biotic and abiotic factors contribute to observed variation in crab size and abundance. We compared trends in southern sea otters relative to Dungeness crab landings in California to assess whether increasing sea otter abundance have negatively impacted landings. In Elkhorn Slough, juvenile Dungeness crab abundance and size have declined since 2012, coinciding with sea otter population growth. However, the impact of sea otters on juvenile Dungeness crab size was habitat-specific and only significant in unvegetated habitat. Across estuaries, we found that cancrid crab abundance and size were negatively associated with sea otter presence. While abiotic factors varied among estuaries, these factors explained little of the observed variation in crab abundance or size. Although we found evidence that sea otters can have localized effects on cancrid crab populations within estuaries, we found no evidence that southern sea otters, at recent population sizes, have negatively impacted Dungeness crab landings in California from 2000-2014.


Author(s):  
G.G. Cossens ◽  
M.F. Hawke

During the first 20 years of a Pinus radiata tree rotation, tree growth and pasture yield were assessed under a range of tree spacings at Invermay and Akatore, two coastal sites in Eastern Otago. Pasture yield in association with trees thinned to 100 stems per hectare (sph) was comparable to that from open pasture up to a tree age of 12 years. By the 19th year, however, pasture production declined to 63% of open pasture yield at Invermay and to 42% at Akatore. At 200 and 400 sph at Akatore, pasture yield was similar to that from open pasture at tree age 12 years but declined to 27% and 0% of open pasture yield respectively by year 20. At both Invermay and Akatore, the ryegrass and clover content of open pasture was relatively constant throughout the term of the trial. However, both the ryegrass and clover content of pasture beneath trees began to decline by tree age 12 years with a very rapid decline at Akatore in the number of pasture species at 200 sph by the 19th year. No pasture remained at 400 sph, after 19 years. Livestock carrying capacity with sheep on tree treatments at Invermay decreased from 100% of open pasture at year 6 to 60% by year 10. At Akatore, livestock carrying capacity averaged over the 20-year life of the trial was 4.1 stock units per hectare with a maximum of 8.1 stock units at a tree age of 8 years. Tree growth at both sites was similar, averaging between 1 and 1.1 m/year in height over 20 years, with trees at Invermay at 100 sph averaging 9% greater height and diameter growth than at Akatore. Increasing tree stocking from 100 to 200 to 400 sph at Akatore, resulted in increased tree height, but decreased diameter at breast height. A comparison of the East Otago trees with those in a similar trial at Tikitere (Rotorua) 900 km further north indicated that the southern trees were about 6 years later in their growth pattern by tree age 20 years. On both sites, soil pH tended to be lower in the presence of trees and was significantly lower than in open pasture by year 20. The results and comparisons with the Tikitere data suggest that, in an integrated agroforestry regime, there will be livestock grazing under the trees further into the tree rotation in Otago than in North Island sites. However, slower tree growth would result in a longer rotation time to harvest. Current recommendations to farmers are to plant trees on the less productive areas of the farm and adopt a tree stocking rate which fully utilises the site. Keywords: agroforestry, livestock, pasture, Pinus radiata, soil pH, tree stocking


Author(s):  
I.G.C. Kerr ◽  
J.M. Williams ◽  
W.D. Ross ◽  
J.M. Pollard

The European rabbit (Oryctolagus cuniculus) introduced into New Zealand in the 183Os, has consistently flourished in Central Otago, the upper Waitaki, and inland Marlborough, all areas of mediterranean climate. It has proved difficult to manage in these habitats. The 'rabbit problem' is largely confined to 105,000 ha of low producing land mostly in semi arid areas of Central Otago. No field scale modifications of the natural habitat have been successful in limiting rabbit numbers. The costs of control exceed the revenue from the land and continued public funding for control operations appears necessary. A system for classifying land according to the degree of rabbit proneness is described. Soil survey and land classification information for Central Otago is related to the distribution and density of rabbits. This intormation can be used as a basis for defining rabbit carrying capacity and consequent land use constraints and management needs. It is concluded that the natural rabbit carrying capacity of land can be defined by reference to soil survey information and cultural modification to the natural vegetation. Classification of land according to rabbit proneness is proposed as a means of identifying the need for, and allocation of, public funding tor rabbit management. Keywords: Rabbit habitat, rabbit proneness, use of rabbit prone land.


Author(s):  
B.J. Arnst ◽  
O.L. Park

Large areas of North Island hill country are producing below potential as a result of low fertility and poor pasture composition. Removal of undesirable species and replacement with a higher producing pasture is essential for increased productivity but is difficult to achieve. A development programme is described where the use of glyphosate in close association with oversowing and stock management has allowed rapid pasture establishment, marked increase in carrying capacity and a quick return on investment. Keywords: Pasture establishment, glyphosate, oversowing, white clover, subdivision, productivity.


2005 ◽  
Vol 10 (2) ◽  
pp. 151-160 ◽  
Author(s):  
J. Kala ◽  
Z. Kala

Authors of article analysed influence of variability of yield strength over cross-section of hot rolled steel member to its load-carrying capacity. In calculation models, the yield strength is usually taken as constant. But yield strength of a steel hot-rolled beam is generally a random quantity. Not only the whole beam but also its parts have slightly different material characteristics. According to the results of more accurate measurements, the statistical characteristics of the material taken from various cross-section points (e.g. from a web and a flange) are, however, more or less different. This variation is described by one dimensional random field. The load-carrying capacity of the beam IPE300 under bending moment at its ends with the lateral buckling influence included is analysed, nondimensional slenderness according to EC3 is λ¯ = 0.6. For this relatively low slender beam the influence of the yield strength on the load-carrying capacity is large. Also the influence of all the other imperfections as accurately as possible, the load-carrying capacity was determined by geometrically and materially nonlinear solution of very accurate FEM model by the ANSYS programme.


2005 ◽  
Vol 10 (1) ◽  
pp. 65-75 ◽  
Author(s):  
Z. Kala

The load-carrying capacity of the member with imperfections under axial compression is analysed in the present paper. The study is divided into two parts: (i) in the first one, the input parameters are considered to be random numbers (with distribution of probability functions obtained from experimental results and/or tolerance standard), while (ii) in the other one, the input parameters are considered to be fuzzy numbers (with membership functions). The load-carrying capacity was calculated by geometrical nonlinear solution of a beam by means of the finite element method. In the case (ii), the membership function was determined by applying the fuzzy sets, whereas in the case (i), the distribution probability function of load-carrying capacity was determined. For (i) stochastic solution, the numerical simulation Monte Carlo method was applied, whereas for (ii) fuzzy solution, the method of the so-called α cuts was applied. The design load-carrying capacity was determined according to the EC3 and EN1990 standards. The results of the fuzzy, stochastic and deterministic analyses are compared in the concluding part of the paper.


Sign in / Sign up

Export Citation Format

Share Document