The impact of powdered keramsite on activated sludge and wastewater treatment in a sequencing batch reactor

2019 ◽  
Vol 237 ◽  
pp. 305-312 ◽  
Author(s):  
Adam Masłoń ◽  
Janusz A. Tomaszek ◽  
Justyna Zamorska ◽  
Monika Zdeb ◽  
Adam Piech ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Sequencing Batch Reactor ◽  
Batch Reactor ◽  
The Impact

scholarly journals Simulation for the Performance and Economic Evaluation of Conventional Activated Sludge Process Replacing by Sequencing Batch Reactor Technology in a Petroleum Refinery Wastewater Treatment Plant

2019 ◽  
Vol 3 (2) ◽  
pp. 45 ◽  
Author(s):  
Shahryar Jafarinejad
Keyword(s):  
Computer Simulation ◽  
Wastewater Treatment ◽  
Activated Sludge ◽  
Sequencing Batch Reactor ◽  
Petroleum Refinery ◽  
Batch Reactor ◽  
Refinery Wastewater ◽  
Conventional Activated Sludge ◽  
Petroleum Refinery Wastewater ◽  
Project Construction

Treatment of the petroleum refinery wastewater containing complex chemicals using biological processes is usually challenging because of the inhibition and/or toxicity of these matters when they serve as microbial substrates. In addition, performance modeling and cost evaluation of processes are essential for designing, construction, and forecasting future economic requirements of the petroleum refinery wastewater treatment plants (PRWWTPs). In this study, the performance and economics of conventional activated sludge (CAS) process replacing by sequencing batch reactor (SBR) technology in a two train PRWWTP were evaluated using simulation. The final treated effluent characteristics for the PRWWTPs containing CAS + CAS and SBR + CAS processes under steady state conditions were studied and evolution of the main parameters of the final effluent during the 30 days of simulation for these plants were investigated. Finally, the total project construction, operation labor, maintenance, material, chemical, energy, and amortization costs of these plants were estimated and compared. Results demonstrated that the project construction cost of PRWWTP containing CAS + CAS processes was lower than that of PRWWTP containing SBR + CAS processes and the energy and amortization costs for both plants were higher in comparison with the operation, maintenance, material, and chemical costs. Note that this study is a computer simulation and drawing general conclusions only on the basis of computer simulation may be insufficient.

scholarly journals Design of Sequencing Batch Reactor (SBR) Treatment Plant for Abattoir Wastewater (A Case of Apa Mmini Stream)

2020 ◽  
pp. 15-21
Author(s):  
Ogbebor Daniel ◽  
Ndekwu, Benneth Onyedikachukwu
Keyword(s):  
Activated Sludge ◽  
Sequencing Batch Reactor ◽  
Settling Velocity ◽  
Batch Reactor ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Treatment Method ◽  
Design Parameters ◽  
Sequence Batch Reactor ◽  
The Impact

Aim: The study aimed at designing a wastewater treatment method for removal of (Biological Oxygen Demand) BOD5 using Sequencing batch reactor (SBR). Study Design: SBR functions as a fill-and-draw type of activated sludge system involving a single complete-mix reactor where all steps of an activated sludge process take place. Methodology: The intermittent nature of slaughterhouse wastewaters favours batch treatment methods like sequence batch reactor (SBR). Attempts to remediate the impact of this BOD5 on the stream, led to the design of a sequence batch reactor which was designed to treat slaughterhouse effluent of 1000 L. Results: The oxygen requirement for effective removal of BOD5 to 95% was determined to be 21.10513 kgO2/d, while L:B  of 3:1 was considered for the reactor. Also, air mixing pressure for the design was 0.16835 bar, while settling velocity was . Conclusion: To ensure proper treatment of BOD5 load of the slaughterhouse, a sequencing Batch reactor of 1000 litre carrying capacity was designed. For effective operation of this design, the pressure exerted by the mixing air was 0.16835 bar which was far greater than the pressure exerted by the reactor content and the nozzle. Settling velocity of 0.0003445 m/s for 0.887 hrs was required for the reactor to be stable and a theoretical air requirement of 1.6884 m³/d was calculated. Hence the power dissipated by the rising air bubbles to ensure efficient mixing of oxygen in the reactor was calculated as 26530003.91 Kilowatts. With these design parameters, the high BOD5 load downstream of the river can be treated to fall below the FMEnv recommended limit of 50 mg/l.

scholarly journals Impact of the Biological Cotreatment of the Kalina Pond Leachate on Laboratory Sequencing Batch Reactor Operation and Activated Sludge Quality

Water ◽  
2019 ◽  
Vol 11 (8) ◽  
pp. 1539 ◽  
Author(s):  
Justyna Michalska ◽  
Izabela Greń ◽  
Joanna Żur ◽  
Daniel Wasilkowski ◽  
Agnieszka Mrozik
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Landfill Leachate ◽  
Sequencing Batch Reactor ◽  
Wastewater Treatment Plants ◽  
Negative Impact ◽  
Batch Reactor ◽  
Oxygen Demand ◽  
Pollutant Removal ◽  
Wastewater Treatment Process

Hauling landfill leachate to offsite urban wastewater treatment plants is a way to achieve pollutant removal. However, the implementation of biological methods for the treatment of landfill leachate can be extremely challenging. This study aims to investigate the effect of blending wastewater with 3.5% and 5.5% of the industrial leachate from the Kalina pond (KPL) on the performance of sequencing batch reactor (SBR) and capacity of activated sludge microorganisms. The results showed that the removal efficiency of the chemical oxygen demand declined in the contaminated SBR from 100% to 69% and, subsequently, to 41% after the cotreatment with 3.5% and 5.5% of the pollutant. In parallel, the activities of the dehydrogenases and nonspecific esterases declined by 58% and 39%, and 79% and 81% after 32 days of the exposure of the SBR to 3.5% and 5.5% of the leachate, respectively. Furthermore, the presence of the KPL in the sewage affected the sludge microorganisms through a reduction in their functional capacity as well as a decrease in the percentages of the marker fatty acids for different microbial groups. A multifactorial analysis of the parameters relevant for the wastewater treatment process confirmed unambiguously the negative impact of the leachate on the operation, activity, and structure of the activated sludge.

scholarly journals The Impact of Bioaugmentation on the Performance and Microbial Community Dynamics of an Industrial-Scale Activated Sludge Sequencing Batch Reactor under Various Loading Shocks of Heavy Oil Refinery Wastewater

Water ◽  
2021 ◽  
Vol 13 (20) ◽  
pp. 2822
Author(s):  
Kai Cui ◽  
Quanshu Xu ◽  
Xiaoying Sheng ◽  
Qingfan Meng ◽  
Gaoyuan Shang ◽  
...  
Keyword(s):  
Activated Sludge ◽  
Heavy Oil ◽  
Sequencing Batch Reactor ◽  
Community Dynamics ◽  
Batch Reactor ◽  
Oil Refinery ◽  
Refinery Wastewater ◽  
Microbial Community Dynamics ◽  
The Impact ◽  
Oil Refinery Wastewater

The stable and efficient operation of the activated sludge sequencing batch reactor (ASSBR) in heavy oil refineries has become an urgent necessity in wastewater biotreatment. Hence, we constructed a green and efficient solid bioaugmentation agent (SBA) to enhance the resistance of the reactor to loading shock. The impact of bioaugmentation on the performance and microbial community dynamics under three patterns of heavy oil refinery wastewater (HORW) loading shock (higher COD, higher toxicity, and higher flow rate) was investigated on an industrial-scale ASSBR. Results showed that the optimal SBA formulation was a ratio and addition of mixed bacteria Bacillus subtillis and Brucella sp., of 3:1 and 3.0%, respectively, and a glucose concentration of 5.0 mg/L. The shock resistance of ASSBR was gradually enhanced and normal performance was restored within 6–7 days by the addition of 0.2% SBA. Additionally, the removal efficiency of chemical oxygen demand and total nitrogen reached 86% and 55%, respectively. Furthermore, we found that Burkholderiaceae (12.9%) was replaced by Pseudomonadaceae (17.1%) in wastewater, and Lachnospiraceae (25.4%) in activated sludge was replaced by Prevotellaceae (35.3%), indicating that the impact of different shocks effectively accelerated the evolution of microbial communities and formed their own unique dominant bacterial families.

scholarly journals The Impact of an Ultrasonic Field on the Efficiency of Coke Wastewater Treatment in a Sequencing Batch Reactor

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 963
Author(s):  
Anna Kwarciak-Kozłowska ◽  
Małgorzata Worwąg
Keyword(s):  
Wastewater Treatment ◽  
Sequencing Batch Reactor ◽  
Treatment Process ◽  
Batch Reactor ◽  
Oxygen Demand ◽  
Ultrasonic Field ◽  
Toxic Substances ◽  
Coke Wastewater ◽  
Biological Methods ◽  
The Impact

The growing production of coke and, consequently, coke wastewater is a significant problem for the environment. Coke wastewater, because it contains high amounts of toxic substances, is classified as an extremely hazardous industrial wastewater. The treatment of such wastewater requires a combination of advanced physicochemical and biological methods. The aim of the research was to investigate the effectiveness of the application of the ultrasonic disintegration of coke wastewater in a sequencing batch reactor (SBR). The tests were conducted in two stages, wherein the first stage involved determining the most favorable sonication conditions, that is, time and amplitude. The authors used the following amplitudes: 31 µm; 61.5 µm; 92 µm; 123 µm and times: 120 s; 240 s; 480 s; 960 s. The second stage focused on treating coke wastewater in SBRs (Reactor A—a proportion of coke wastewater in the mixture: 5%, 10%, and 20%; reactor B—sonicated coke wastewater, proportion in mixture: 5%, 10%, 20%). The efficiency of the treatment process was determined based on the rate of removal of selected parameters: chemical oxygen demand (COD), total organic carbon (TOC), inorganic carbon (IC), ammoniacal nitrogen (N-NH4), total nitrogen (TN), the course of pH changes. The study revealed that sonication of coke wastewater increased biodegradability and reduced its toxicity. The use of the preliminary sonication of coke wastewater before biological treatment improved the degree of removal of the tested parameters by approximately 10%. The volumetric ratio of coke wastewater in the mixture had the greatest impact on the obtained results. The use of an ultrasound field allows the treatment process to be executed with a coke wastewater addition exceeding 10%. In addition, it was found that in order to increase the coke wastewater treatment efficiency, one should optimize individual phases in the SBR and the pollution load.

Enrichment and characterization of an anaerobic methyl ethyl ketoxime degrading culture from an anoxic/anaerobic/aerobic activated sludge sequencing batch reactor

1998 ◽  
Vol 37 (4-5) ◽  
pp. 95-98 ◽  
Author(s):  
Nancy G. Love ◽  
Mary E. Rust ◽  
Kathy C. Terlesky
Keyword(s):  
Energy Source ◽  
Activated Sludge ◽  
Electron Acceptor ◽  
Sequencing Batch Reactor ◽  
Enrichment Culture ◽  
Batch Reactor ◽  
Nitrification Inhibitor ◽  
Time Frame ◽  
Methyl Ethyl

An anaerobic enrichment culture was developed from an anoxic/anaerobic/aerobic activated sludge sequencing batch reactor using methyl ethyl ketoxime (MEKO), a potent nitrification inhibitor, as the sole carbon and energy source in the absence of molecular oxygen and nitrate. The enrichment culture was gradually fed decreasing amounts of biogenic organic compounds and increasing concentrations of MEKO over 23 days until the cultures metabolized the oxime as the sole carbon source; the cultures were maintained for an additional 41 days on MEKO alone. Turbidity stabilized at approximately 100 mg/l total suspended solids. Growth on selective media plates confirmed that the microorganisms were utilizing the MEKO as the sole carbon and energy source. The time frame required for growth indicated that the kinetics for MEKO degradation are slow. A batch test indicated that dissolved organic carbon decreased at a rate comparable to MEKO consumption, while sulfate was not consumed. The nature of the electron acceptor in anaerobic MEKO metabolism is unclear, but it is hypothesized that the MEKO is hydrolyzed intracellularly to form methyl ethyl ketone and hydroxylamine which serve as electron donor and electron acceptor, respectively.

Sign in / Sign up

Export Citation Format

Share Document