Regulation of carbon source metabolism in mixotrophic microalgae cultivation in response to light intensity variation

2022 ◽  
Vol 302 ◽  
pp. 114095
Author(s):  
Pengtao Gao ◽  
Liang Guo ◽  
Mengchun Gao ◽  
Yangguo Zhao ◽  
Chunji Jin ◽  
...  
2020 ◽  
Vol 141 ◽  
pp. 03009
Author(s):  
Pichayatorn Bunkaew ◽  
Sasithorn Kongruang

The Plackett-Burman Design (PBD) was applied to study fresh water microalgae cultivation using Chlorella sp. TISTR 8411 to select the influential nutrient factors for biomass and lipid production. The PBD for 13 trials from 11 nutrient factors with 3 levels was studied in the mixotrophic cultivation at 28 0C under 16:8 light and dark photoperiods over 7 days of cultivation time. Two influential factors were chosen as glucose and cobalt chloride hexahydrate to further design via Box-Behnken Design (BBD) in order to optimize the cultivation of this microalgae for biodiesel production. The 17 trials of 3 factors and 3 levels of BBD experimental design technique were applied with varying factors of glucose (20-40 g/L), cobalt chloride hexahydrate (0.01-0.04 mg/L) and light intensity (4,500-7,500 Lux) under 16:8 light and dark photoperiods over 7 days of cultivation time at 28 0C. Result showed that Chlorella sp. TISTR 8411 cultivation yield 0.52 g/L biomass and 0.31 g/L lipid production resulting in approximately 60% of lipid production when cultivated in 20.05 g/L glucose, 0.04 mg/L CoCl26H2O under light intensity of 4,614 Lux with the supplementation of 4.38 g/L NaHCO3 coupled with 1 g/L of both NaNO3 and KH2PO4. Under statically mixotrophic cultivation, result indicated that Chlorella sp. TISTR 8411 had potential to produce high lipid content for biodiesel application and biomass production for nutraceutical application. Further experiment with the longer cultivation period up to 2 weeks would implement not only for monitoring the growth kinetics but also evaluating the suitable type of fatty acid production.


2020 ◽  
Vol 52 (8) ◽  
pp. 1040-1056
Author(s):  
S Sakar ◽  
A Bagheri ◽  
S Rönnberg ◽  
MHJ Bollen

There is an ongoing transition from high-pressure sodium lamps to LED street lamps that offer higher efficiency, cost saving and better photometric performance. This transition could lead to unintended consequences such as light flicker and extinguishing in street lighting applications when they are exposed to voltage dips. The goal of this paper is to analyse the light intensity variation of various street lamps when they are exposed to voltage dips. Several performance metrics for quantifying immunity of lamps have been proposed. Values for these metrics are obtained by applying artificial voltage dips to lamps. For voltage dips with residual voltage above 38%, lamps are immune in terms of a short-term light flicker metric. For residual voltage above 25%, light intensity reduces but without extinguishing. Compared to an incandescent lamp and high-pressure sodium lamp, LED street lamps exhibit longer zero-light intensity duration. Most of the studied LED street lamps exhibit uncoordinated light intensity drops, i.e. longer or shifted, with respect to the applied voltage dip. Individual characteristics of LED street lamps require testing before installation to prevent unexpected consequences. Recommendations are given for standardisation committees to implement an assessment method for lighting equipment.


Optik ◽  
2020 ◽  
Vol 200 ◽  
pp. 163362 ◽  
Author(s):  
Fukang Sun ◽  
Jianxia Xie ◽  
Qiansheng Fang ◽  
Xinxin Zhuo

2013 ◽  
Vol 05 (10) ◽  
pp. 1069-1077 ◽  
Author(s):  
R. Abd Elgani ◽  
M. H. M. Hilo ◽  
M. D. Abd Allah ◽  
A. Al Hassan ◽  
R. Abd Elhai

Sign in / Sign up

Export Citation Format

Share Document