Developing Brønsted–Lewis acids bifunctionalized ionic liquids based heteropolyacid hybrid as high-efficient solid acids in esterification and biomass conversion

2020 ◽  
Vol 92 ◽  
pp. 200-209
Author(s):  
Yong Liu ◽  
Yuefeng Wu ◽  
Miaojun Su ◽  
Weihua Liu ◽  
Xiying Li ◽  
...  
Molecules ◽  
2019 ◽  
Vol 24 (19) ◽  
pp. 3572 ◽  
Author(s):  
Toshitaka Funazukuri ◽  
Shingo Ozawa

Hydrothermal hydrolysis in hot pressurized liquid water (HPLW) is attractive for biomass conversion into valuable products because it achieves high reaction rates without catalysts and additives. The hydrothermal hydrolysis of high crystalline cellulose requires higher reaction temperature than polysaccharides having low crystallinity. It can be expected to increase the reaction rate or decrease temperature by decreasing the crystallinity. In the present study ashless filter paper as a fibrous pure cellulose sample was pretreated with ionic liquids (ILs) such as imidazolium chloride ILs containing alkyl side chains ranging from two to six carbons, and with an aqueous solution of bis(ethylenediamine ammonium) copper (BEDC). Herein, the pretreatment with ILs was to regenerate filter paper: dissolving in ILs at 373 K for 120 min or in an aqueous BEDC solution at room temperature, precipitating by adding water, washing the solid, and then drying. Subsequently, the pretreated filter paper samples were hydrolyzed at 533 K and 5.0 MPa in HPLW in a small semi-batch reactor, and the effects of the pretreatment with ILs or BEDC on reaction rates and product yields were examined. While the crystallinity indexes with all ILs and BEDC after the pretreatments decreased to 44 to 47 from the original sample of 87, the reaction rates and product yields were significantly affected by the IL species. At 533 K and 5.0 MPa, the dissolution rate with [AMIM][Cl] was nine times as fast as that for untreated sample.


ChemInform ◽  
2004 ◽  
Vol 35 (10) ◽  
Author(s):  
Shun-Jun Ji ◽  
Min-Feng Zhou ◽  
Da-Gong Gu ◽  
Shun-Yi Wang ◽  
Teck-Peng Loh

2017 ◽  
Vol 6 (3) ◽  
pp. 193 ◽  
Author(s):  
Paul Wilson ◽  
Mark L. Kaliya ◽  
Miron V. Landau ◽  
Moti Herskowitz

<p>Evaluation of catalytic performances of selected metal chlorides such as AlCl<sub>3</sub>, SnCl<sub>4</sub>, ZnCl<sub>2</sub>, FeCl<sub>3</sub>, InCl<sub>3</sub> and GaCl<sub>3</sub> with solid acids such as sulfated zirconia, and zeolite beta was accomplished for acetylation of anisole, toluene and naphthalene. Presence of super acidity (Lewis or Bronsted acid) is found to be indispensable for activation of substrates towards acetylation reactions. In addition, presence of redox centers would further complement with the Lewis acid sites rendering catalytic stamina against deactivation. Strength of Lewis acid basically determines the activity of the metal chlorides towards acetylation. Among the Lewis acids investigated, FeCl<sub>3</sub>, InCl<sub>3</sub> and GaCl<sub>3</sub> exhibit their catalytic behaviour mostly through redox property as is evident from the conservation of Turn over number even after first cycle. Sulfated zirconia surpasses all the acid catalysts including metal chlorides and exhibits extended catalytic activity in acetylation of anisole. The pre-eminence of sulphated zirconia over other catalytic systems is owing to the synergistic effect of Lewis and Bronsted acidity.</p>


Inorganics ◽  
2018 ◽  
Vol 6 (3) ◽  
pp. 78 ◽  
Author(s):  
Tiina Aid ◽  
Mihkel Koel ◽  
Margus Lopp ◽  
Merike Vaher

Biomass conversion to 5-hydroxymethylfurfural (HMF) has been widely investigated as a sustainable alternative to petroleum-based feedstock, since it can be efficiently converted to fuel, plastic, polyester, and other industrial chemicals. In this report, the degradation of commercial cellulose, the isomerization of glucose to fructose, and the conversion of glucose to HMF in 1-butyl-3-methylimidazolium chloride ([BMIM]Cl]) using metal catalysts (CrCl3, ZnCl2, MgCl2) as well as tungsten and molybdenum oxide-based polyoxometalates (POM) were investigated. Tungsten and molybdenum oxide-based POMs in ionic liquids (IL) were able to degrade cellulose to majority glucose and epimerize glucose to mannose (in the case of the molybdenum oxide-based POM). A certain amount of glucose was also converted to HMF. The tungsten oxide-based POM in IL showed good activity for cellulose degradation but the overall products yield remained 28.6% lower than those obtained using CrCl3 as a catalyst. Lowering the cellulose loading did not significantly influence the results and the addition of water to the reaction medium decreased the product yields remarkably.


2013 ◽  
Vol 701 ◽  
pp. 399-402 ◽  
Author(s):  
Ahmad Anas Nagoor Gunny ◽  
Dachyar Arbain

Green technology has become the primary concern of nations around the world. In-line with this concern, lignocellulosic biomass is often advocated as significant starting material for a greener production. However, the current biomass conversion cannot be considered as green due to the use of acid or alkaline during its pretreatment. An introduction of ionic liquids (ILs) as replacement of acids or alkaline for the pretreatment of lingo-cellulosic materials is gaining interest due to their minimal waste, nonvolatility and low toxicity and therefore considered green. This paper discusses the benefits of ILs as a green solvent for pretreatment of lignocellulosic biomass.


Sign in / Sign up

Export Citation Format

Share Document