Simulation of mechanical behavior and optimization of simulated injection molding process for PLA based antibacterial composite and nanocomposite bone screws using central composite design

2017 ◽  
Vol 65 ◽  
pp. 160-176 ◽  
Author(s):  
Behzad Shiroud Heidari ◽  
Erfan Oliaei ◽  
Hadi Shayesteh ◽  
Seyed Mohammad Davachi ◽  
Iman Hejazi ◽  
...  
Keyword(s):  
Injection Molding ◽  
Mechanical Behavior ◽  
Central Composite Design ◽  
Bone Screws ◽  
Injection Molding Process ◽  
Molding Process ◽  
Central Composite

scholarly journals Optimization on the Injection Molding Propypopylene Parameters Using Central Composite Design for Minimizing Defects

2020 ◽  
Vol 55 (2) ◽  
Author(s):  
Moh. Hartono ◽  
Pratikto ◽  
Purnomo B. Santoso ◽  
Sugiono
Keyword(s):  
Injection Molding ◽  
Central Composite Design ◽  
Injection Pressure ◽  
Holding Time ◽  
Clamping Force ◽  
Molding Process ◽  
Injection Speed ◽  
Injection Temperature ◽  
Central Composite ◽  
Plastic Products

This study aims to simultaneously forecast and investigate the optimization process characterization of the design of controlled parameters in the injection process of polypropylene molding including injection pressure combination, clamping force, injection temperature, injection speed, and holding time, and their interaction to produce qualified plastic by minimizing defects. The experimental methods used the central composite design of response surface method with five factors and a variety of levels. This method is more effective because it is an improvement on and a development from previous studies—especially those related to the plastic molding process. Additionally, it can simultaneously predict and optimize the obtaining of the highest quality plastic products as well as minimizing defects. The results are in the form of a combination of control level factors and interactions among the factors that generate the robust output of plastic products with minimum defects. Moreover, the optimum settings of the parameters provides a global solution at an injection temperature of 275°C, injection pressure of 75 bar, injection speed of 98%, clamping force of 88 tons, and a holding time of 8 seconds to generate a response to product probability defects by 0.0062. The benefit is that it can reveal the behavior and characteristics of parameter design and their interactions in the plastic injection molding process to produce qualified plastics and minimize product defects.

Integrative Analysis of the Injection Molding Process and Mechanical Behavior of Plastic Part

2013 ◽  
Vol 705 ◽  
pp. 181-186
Author(s):  
Qing Wen Zhang ◽  
Ying Jie Xu ◽  
Wei Hong Zhang ◽  
Jun Wang
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Injection Molding ◽  
Mechanical Behavior ◽  
Manufacturing Process ◽  
Mechanical Performance ◽  
Integrative Analysis ◽  
Injection Molding Process ◽  
Plastic Part ◽  
Molding Process

For parts made of plastics, injection molding is a common manufacturing process. Warpage and residual stress induced during the injection molding process have very important influences on the mechanical performance of injection products. In this paper, an integrative analysis of the injection molding process and mechanical performance of plastic parts is proposed. This integrative approach incorporates the effects of the manufacturing process in the mechanical simulation: (a) firstly, the finite element package MoldFlow is used to simulate the injection molding process and obtain the warpage and residual stress results. (b) Then the finite element model of plastic part including the process induced warpage and residual stress is established. Explicit dynamic finite element program LS-DYNA is used to simulate the mechanical behaviors of the molded part. Based on the integrative analysis, the influences of injection molding process parameters on mechanical behavior of a PC windshield against impact loading are studied.

Filling Behavior of Polymer Material into Sub-^|^mu;m Structure in Injection Molding Process

2013 ◽  
Vol 133 (4) ◽  
pp. 105-111
Author(s):  
Chisato Yoshimura ◽  
Hiroyuki Hosokawa ◽  
Koji Shimojima ◽  
Fumihiro Itoigawa
Keyword(s):  
Injection Molding ◽  
Polymer Material ◽  
Injection Molding Process ◽  
Molding Process

scholarly journals Study on External Gas-Assisted Mold Temperature Control with the Assistance of a Flow Focusing Device in the Injection Molding Process

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 965 ◽  
Author(s):  
Nguyen Truong Giang ◽  
Pham Son Minh ◽  
Tran Anh Son ◽  
Tran Minh The Uyen ◽  
Thanh-Hai Nguyen ◽  
...  
Keyword(s):  
Injection Molding ◽  
Temperature Control ◽  
Mold Temperature ◽  
Injection Molding Process ◽  
Melt Flow ◽  
Flow Focusing ◽  
Molding Process ◽  
Heating Efficiency ◽  
Flow Length ◽  
Insert Plate

In the injection molding field, the flow of plastic material is one of the most important issues, especially regarding the ability of melted plastic to fill the thin walls of products. To improve the melt flow length, a high mold temperature was applied with pre-heating of the cavity surface. In this paper, we present our research on the injection molding process with pre-heating by external gas-assisted mold temperature control. After this, we observed an improvement in the melt flow length into thin-walled products due to the high mold temperature during the filling step. In addition, to develop the heating efficiency, a flow focusing device (FFD) was applied and verified. The simulations and experiments were carried out within an air temperature of 400 °C and heating time of 20 s to investigate a flow focusing device to assist with external gas-assisted mold temperature control (Ex-GMTC), with the application of various FFD types for the temperature distribution of the insert plate. The heating process was applied for a simple insert model with dimensions of 50 mm × 50 mm × 2 mm, in order to verify the influence of the FFD geometry on the heating result. After that, Ex-GMTC with the assistance of FFD was carried out for a mold-reading process, and the FFD influence was estimated by the mold heating result and the improvement of the melt flow length using acrylonitrile butadiene styrene (ABS). The results show that the air sprue gap (h) significantly affects the temperature of the insert and an air sprue gap of 3 mm gives the best heating rate, with the highest temperature being 321.2 °C. Likewise, the actual results show that the height of the flow focusing device (V) also influences the temperature of the insert plate and that a 5 mm high FFD gives the best results with a maximum temperature of 332.3 °C. Moreover, the heating efficiency when using FFD is always higher than without FFD. After examining the effect of FFD, its application was considered, in order to improve the melt flow length in injection molding, which increased from 38.6 to 170 mm, while the balance of the melt filling was also clearly improved.

Sign in / Sign up

Export Citation Format

Share Document