Structure and performance tests of a magnetocaloric cooling device with linear motion of the magnetic field source

Author(s):  
A. Kolano-Burian ◽  
R. Kolano ◽  
M. Hreczka ◽  
M. Steczkowska-Kempka ◽  
P. Zackiewicz ◽  
...  
2016 ◽  
Vol 129 (6) ◽  
pp. 1205-1209 ◽  
Author(s):  
R. Kolano ◽  
A. Kolano-Burian ◽  
M. Hreczka ◽  
M. Polak ◽  
J. Szynowski ◽  
...  

2018 ◽  
Author(s):  
Mahendran Subramanian ◽  
Arkadiusz Miaskowski ◽  
Stuart Iain Jenkins ◽  
Jenson Lim ◽  
Jon Dobson

AbstractThe manipulation of magnetic nanoparticles (MNPs) using an external magnetic field, has been demonstrated to be useful in various biomedical applications. Some techniques have evolved utilizing this non-invasive external stimulus but the scientific community widely adopts few, and there is an excellent potential for more novel methods. The primary focus of this study is on understanding the manipulation of MNPs by a time-varying static magnetic field and how this can be used, at different frequencies and displacement, to manipulate cellular function. Here we explore, using numerical modeling, the physical mechanism which underlies this kind of manipulation, and we discuss potential improvements which would enhance such manipulation with its use in biomedical applications, i.e., increasing the MNP response by improving the field parameters. From our observations and other related studies, we infer that such manipulation depends mostly on the magnetic field gradient, the magnetic susceptibility and size of the MNPs, the magnet array oscillating frequency, the viscosity of the medium surrounding MNPs, and the distance between the magnetic field source and the MNPs. Additionally, we demonstrate cytotoxicity in neuroblastoma (SH-SY5Y) and hepatocellular carcinoma (HepG2) cells in vitro. This was induced by incubation with MNPs, followed by exposure to a magnetic field gradient, physically oscillating at various frequencies and displacement amplitudes. Even though this technique reliably produces MNP endocytosis and/or cytotoxicity, a better biophysical understanding is required to develop the mechanism used for this precision manipulation of MNPs, in vitro.


2012 ◽  
Vol 532-533 ◽  
pp. 1308-1312 ◽  
Author(s):  
Zhong Le Liu ◽  
Han Jun Zhang ◽  
Hua Li

The article based on the analysis of the work principle of the torpedo magnetic fuse, according to the specific circumstances of the received signal of the torpedo magnetic fuse, proposed to use the two electrodes direct opening mode magnetic field source to simulate the warship magnetic field signal of the torpedo explosive induce magnetic fuse action. The Simulating calculation shows that the magnetic field of the magnetic bait has good simulation effect; it can effectively induce the torpedo magnetic fuse.


2008 ◽  
Vol 392-394 ◽  
pp. 761-766 ◽  
Author(s):  
G.Q. Wu ◽  
J.L. Zhou ◽  
Xu Dong Zhang ◽  
Y.M. Zhang ◽  
Xiao Ni Chi ◽  
...  

There is a magnetic field inside thrust bearing. The magnetic field distribution is one of the key factors which decide the running state and performance. With the finite element of ANSYS software, the magnetic field of thrust bearing has been analyzed. The rule of changes between the magnetic field and the influencing factors has been discovered. The analysis shows that the direction of exciting current should be opposite other than identical. The greater the ratio of gap length between stator and rotor and working gap length is, the less magnetic field leakage is. The flux leakage of thrust bearing attains 37 percent when the ratio of the gap is 4.0. If the design of a complete machine is not proper, the flux leakage may attain 20 percent upwards through other gaps although that of the bearing itself is almost zero. Calculation of bearing capacity indicates that theoretical value is not exact due to its neglect of magnetic saturation and flux leakage, while FEM value comparably matches the real substance with considering the magnetic saturation and flux leakage. The research provides the theoretical basis for optimization of system structure and selection of current direction control.


2016 ◽  
Author(s):  
Vira Pronenko ◽  
Fedir Dudkin

Abstract. The profession of a miner is one of the most dangerous in the world. Among the main causes of the fatalities in the underground coal mines is the untimely alerting of the accident, as well as the lack of information for the rescuers about the actual location of the miners after the accident. In an emergency situation (failure or destruction of underground infrastructure), personnel search behind and beneath of blockage should be provided urgently. But none of the standard technologies (RFID, DECT, WiFi, emitting cable), which use the stationary technical devices in mines, provides the information about the people location caught by accident with necessary precision. The only technology that is able to provide guaranteed delivery of messages about the accident to the mine personnel, regardless of their location and under any destruction in the mine, is low-frequency radio technology able to operate through the thickness of rocks even if it is wet. The proposed new system for miners localization is based on solving the inverse problem that allows the magnetic field source coordinates determining using the data of magnetic field measurements. This approach is based on the measurement of the magnetic field radiated by the miner's responder beacon using two fixed and spaced three-component magnetic field receivers and next the inverse problem solution. As a result, the working model of the system for miner's beacon search and localization (MILES – miner's location emergency system) was developed and successfully tested. The paper presents the peculiarities of this development and the results of experimental tests.


Author(s):  
Mihye Shin ◽  
Prasheel Lillaney ◽  
Waldo Hinshaw ◽  
Rebecca Fahrig

The key technical innovation needed for close proximity hybrid x-ray/MR (XMR) imaging systems is a new rotating anode x-ray tube motor that can operate in the presence of strong magnetic fields. In order for the new motor design to be optimized between conflicting design requirements, we implemented a numerical model for evaluating the dynamics of the motor. The model predicts the amount of produced torque, rotation speed, and time to accelerate based on the Lorentz force law; the motor is accelerated by the interaction between the magnetic moments of the motor wire loops and an external magnetic field. It also includes an empirical model of bearing friction and electromagnetic force from the magnetic field. Our proposed computational model is validated by experiments using several different magnitudes of external magnetic fields, which averagely shows an agreement within 0.5 % error during acceleration. We are using this model to improve the efficiency and performance of future iterations of the x-ray tube motor.


Author(s):  
Karim El-Rayes ◽  
Ahmed Abdel-Aziz ◽  
Eihab M. Abdel-Rahman ◽  
Raafat Mansour ◽  
Ehab El-Saadany

Energy harvesting from vibrations offers a prevailing non-traditional energy source. We introduce a novel electromagnetic transduction mechanism that can be used to harvest low-frequency vibrations. The mechanism induces a current in a coil by disrupting the electromagnetic field around the coil. The harvester is composed of a coil wound around track and surrounded by a magnetic field. The coil and magnetic field source remain stationary while a ferromagnetic ball material moves freely along the track cutting the field lines, disrupting the magnetic field, and inducing current in the coil. We present a prototype and experiments validating our energy harvesting mechanism as well as a model for the energy harvester. We find that our harvester can generate as much as 2mV and 21 μW from base vibrations of 0.9g amplitude. Our harvester demonstrates low-frequency harvesting with a center frequency as low as 9.4 Hz and a 3db harvesting bandwidth as wide as 5.8 Hz.


Sign in / Sign up

Export Citation Format

Share Document