scholarly journals Characterization of the oxide scale formed on external surface of HP reformer tubes

2018 ◽  
Vol 7 (4) ◽  
pp. 578-583 ◽  
Author(s):  
Rosa Maria Sales da Silveira ◽  
Mónica P. Arenas ◽  
Clara Johanna Pacheco ◽  
Adriana da Cunha Rocha ◽  
Carlos Bruno Eckstein ◽  
...  
2000 ◽  
Vol 90 (9) ◽  
pp. 1032-1038 ◽  
Author(s):  
P. M. L. Dutra ◽  
C. O. Rodrigues ◽  
A. Romeiro ◽  
L. A. M. Grillo ◽  
F. A. Dias ◽  
...  

In the present work ectophosphatase activities of three trypanosomatid parasites of plants were characterized using intact cells. Phytomonas françai, Phytomonas mcgheei, and Herpetomonas sp. hydrolyzed p-nitro-phenylphosphate at a rate of 5.40, 7.28, and 25.58 nmol Pi/mg of protein per min, respectively. Experiments using classical inhibitors of acid phosphatases such as sodium orthovanadate (NaVO3) and sodium fluoride (NaF) showed a decrease in phosphatase activities. Lithium fluoride (LiF) and aluminum chloride (AlCl3) were also used. Although AlCl3 had no effect, LiF was able to promote a decrease in the phosphatase activities. Interestingly, the inhibition caused by LiF was enhanced by the addition of AlCl3 during the reaction, probably due to the formation of fluoroaluminate complexes. This effect was confirmed by cytochemical analysis. In this assay, electron-dense cerium phosphate deposits were visualized on the external surface of the three parasites.


2021 ◽  
Author(s):  
Victoria Munoz-Iglesias ◽  
Maite Fernández-Sampedro ◽  
Carolina Gil-Lozano ◽  
Laura J. Bonales ◽  
Oscar Ercilla Herrero ◽  
...  

<p>Ceres, dwarf planet of the main asteroid belt, is considered a relic ocean world since the Dawn mission discovered evidences of aqueous alteration and cryovolcanic activity [1]. Unexpectedly, a variety of ammonium-rich minerals were identified on its surface, including phyllosilicates, carbonates, and chlorides [2]. Although from the Dawn’s VIR spectroscopic data it was not possible to specify the exact type of phyllosilicates observed, montmorillonite is considered a good candidate owing to its ability to incorporate NH<sub>4</sub><sup>+</sup> in its interlayers [3]. Ammonium-rich phases are usually found at greater distances from the Sun. Hence, the study on their stability at environmental conditions relevant to Ceres’ interior and of its regolith can help elucidate certain ambiguities concerning the provenance of its precursor materials.</p> <p>In this study, it was investigated the changes in the spectroscopic signatures of the clay mineral montmorillonite after (a) being immersed in ammonium chloride aqueous solution and, subsequently, (b) washed with deionized water. After each treatment, samples were submitted to different environmental conditions relevant to the surface of Ceres. For one experiment, they were frozen overnight at 193 K, and then subjected to 10<sup>-5</sup> bar for up to 4 days in a Telstar Cryodos lyophilizer. For the other, they were placed inside the Planetary Atmospheres and Surfaces Chamber (PASC) [4] for 1 day at 100 K and 5.10<sup>-8</sup> bar. The combination of different techniques, i.e., Raman and IR spectroscopies, XRD, and SEM/EDX, assisted the assignment of the bands to each particular molecule. In this regard, the signatures of the mineral external surface were distinguished from the interlayered NH<sub>4</sub><sup>+ </sup>cations. The degree of compaction of the samples resulted crucial on their stability and spectroscopic response, being stiff smectites more resistant to low temperatures and vacuum conditions. In ground clay minerals, a decrease in the basal space with a redshift of the interlayered NH<sub>4</sub><sup>+</sup> IR band was measured after just 1 day of being exposed to vacuum conditions.</p> <p>Acknowledgments</p> <p>This work was supported by the Spanish MINECO projects ESP2017-89053-C2-1-P and PID2019-107442RB-C32, and the AEI project MDM‐2017‐0737 Unidad de Excelencia “María de Maeztu”.</p> <p>References</p> <p>[1] De Sanctis et al.,  Space Sci. Rev. 216, 60, 2020</p> <p>[2] Raponi et al., Icarus 320, 83,  2019</p> <p>[3] Borden and Giese, Clays Clay Miner. 49, 444, 2001</p> <p>[4] Mateo-Marti et al., Life 9, 72, 2019</p>


2016 ◽  
Vol 62 (2) ◽  
pp. 1-4
Author(s):  
Adrian Pryszcz ◽  
Barbora Grycová ◽  
Ivan Koutník ◽  
Veronika Blahůšková

Abstract The main goal of this paper was to characterize and find a useful solution for the decomposition of tar deposits. For the experimental part, tar deposits, formed by polymerization and condensation reactions, were chosen from a storage tank for tars. At first the initial analyses of tar deposits (elemental, thermogravimetric, and calorimetric analyses) were performed. After the characterization, the tar deposits were extracted in the Soxhlet extractor by acetone, toluene, and quinolone and activated with potassium hydroxide. As the final step of this work, the sorption characterization on the 3Flex Surface Characterization Analyzer (Micromeritics) was performed. The specific surface area of the samples was evaluated using two methods - a single point measurement at p/p0=0.2 and BET method. Micropore and external surface areas were calculated based on a t-plot analysis (carbon black model).


1986 ◽  
Vol 82 ◽  
Author(s):  
F.S. Miller ◽  
H.S. Betrabet ◽  
W.A.T. Clark

ABSTRACTSilicon bicrystals have been fabricated by sintering together single crystal {001} and {111} wafers with low angle misorientations In the range of 0.5 to 3.0 degrees. The interfaces in these bicrystals contain regular arrays of screw dislocations with observed spacings of 10 to 40 nm. The dislocations were decorated with copper which was first sputter-deposited on an external surface, then diffused into the interface by annealing the bicrystal at 400°C for 15 minutes. Analytical electron microscopy was used to characterize the spacing, orientation, and copper concentration of these dislocation arrays. The electrical properties of both decorated and undecorated bicrystals were determined using a two-probe step I-V method, and the behavior of both types of bicrystals compared.


2019 ◽  
Vol 91 (5-6) ◽  
pp. 705-727 ◽  
Author(s):  
Xiangyu Zhong ◽  
Fethi Hamdani ◽  
Jian Xu ◽  
Tetsuo Shoji ◽  
Tadashi Tatsuki ◽  
...  

2014 ◽  
Vol 936 ◽  
pp. 424-428
Author(s):  
Ming Ming Hu ◽  
Lin Hua Song ◽  
Bing Lin Tao

Expanded graphite (EG) is a promising conducting filler to enhance the conductivity of the polyacetylene (PA)/EG composites and also an ideal support to catalyst PA to polymerize on the surface of EG. The expanded interlayers of EG prepared by chemical oxidation is between 100 and 1500 nm. Diameters of the Fe (naph)3 nanoparticles deposited on the external surface and internal surface (i.e. surface of the expanded graphitic layers) of EG range from 7 to15 nm. PA/EG composites were prepared by heterogeneous polymerization. PA catalyzed by Fe (naph)3 nanoparticles supported on the external surface and at the edge of the expanded layers was inclined to form bigger aggregation, while PA grown between the interlayers exhibit smaller size. The bulk conductivity of the prepared composites is 5.78×103 S·m-1.


Sign in / Sign up

Export Citation Format

Share Document