Master curve characterization of the fracture toughness behavior in SA508 Gr.4N low alloy steels

2010 ◽  
Vol 403 (1-3) ◽  
pp. 68-74 ◽  
Author(s):  
Ki-Hyoung Lee ◽  
Min-Chul Kim ◽  
Bong-Sang Lee ◽  
Dang-Moon Wee
Keyword(s):  
Fracture Toughness ◽  
Master Curve ◽  
Low Alloy Steels ◽  
Alloy Steels

UNIFLUX VCM 125

Alloy Digest ◽  
1978 ◽  
Vol 27 (1) ◽  
Keyword(s):  
Carbon Dioxide ◽  
Fracture Toughness ◽  
Weld Metal ◽  
Heat Treating ◽  
Carbon Steels ◽  
Low Alloy Steels ◽  
Electrode Wire ◽  
Molybdenum Steel ◽  
Alloy Steels ◽  
Welding Electrode

Abstract UNIFLUX VCM 125 is a continuous flux-cored welding electrode (wire) that is used to deposit 1 1/4% chromium-1/2% molybdenum steel for which it was developed. Welding is protected by a shielding atmosphere of 100% carbon dioxide. This electrode also may be used to weld other low-alloy steels and carbon steels; however, the weld metal may differ somewhat from 1 1/4% chromium-1/2% molybdenum because of weld-metal dilution. When Uniflux VCM 125 is used to weld 1 1/4% chromium-1/2% molybdenum steel, it provides 95,000 psi tensile strength at 70 F and 24 foot-pounds Charpy V-notch impact at 40 F. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-340. Producer or source: Unicore Inc., United Nuclear Corporation.

TRI-MARK TM-115

Alloy Digest ◽  
1983 ◽  
Vol 32 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Arc Welding ◽  
High Strength ◽  
Heat Treating ◽  
Low Alloy Steels ◽  
Mining Equipment ◽  
Alloy Steels ◽  
Temperature Impact ◽  
Welding Electrode

Abstract TRI-MARK TM-115 is a gas-shielded flux-cored welding electrode for continuous high deposition are welding. It is designed specifically for semiautomatic and automatic arc welding of high-strength low-alloy steels and quenched-and-tempered steels. This gas-sheilded tubular wire can be used for single and multiple-pass welding. It has outstanding low-temperature impact properties. Its applications including mining equipment, large vehicles and similar items. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-392. Producer or source: Tri-Mark Inc..

scholarly journals Use of Mini-CT Specimens for Fracture Toughness Characterization of Low Upper-Shelf Linde 80 Weld Before and After Irradiation

2018 ◽  
Author(s):  
Mikhail A. Sokolov
Keyword(s):  
Fracture Toughness ◽  
Pressure Vessel ◽  
Master Curve ◽  
Collaborative Program ◽  
Before And After ◽  
Minimum Number ◽  
Real Practice ◽  
Reactor Pressure ◽  
Good Agreement

Mini-CT specimens are becoming a highly popular geometry for use in reactor pressure vessel (RPV) community for direct measurement of fracture toughness in the transition region using the Master Curve methodology. In the present study, Mini-CT specimens were machined from previously tested Charpy specimens of the Midland low upper-shelf Linde 80 weld in both, unirradiated and irradiated conditions. The irradiated specimens have been characterized as part of a joint ORNL-EPRI-CRIEPI collaborative program. The Linde 80 weld was selected because it has been extensively characterized in the irradiated condition by conventional specimens, and because of the need to validate application of Mini-CT specimens for low upper-shelf materials — a more likely case for some irradiated materials of older generation RPVs. It is shown that the fracture toughness reference temperatures, To, derived from these Mini-CT specimens are in good agreement with To values previously recorded for this material in the unirradiated and irradiated conditions. However, this study indicates that in real practice it is highly advisable to use a much larger number of specimens than the minimum number prescribed in ASTM E1921.

Mechanical Properties of SA508 Gr.4N Model Alloys as a High Strength RPV Steel

2010 ◽  
Author(s):  
Min-Chul Kim ◽  
Ki-Hyoung Lee ◽  
Bong-Sang Lee ◽  
Whung-Whoe Kim
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Impact Toughness ◽  
Power Plants ◽  
Charpy Impact ◽  
Alloying Elements ◽  
Low Alloy Steels ◽  
Charpy Impact Toughness ◽  
Age Related ◽  
Alloy Steels

Demands of RPV materials with higher strength and toughness are rising to increase the power capacity and the operation life of nuclear power plants. The ASME SA508 Gr.4N specification can give a superior toughness and strength to the commercial low alloy steels such as SA508 Gr.3. However, the SA508-Gr.4N steels have not yet been used commercially due to a lack of information of the productivity and the age related properties. While the irradiation embrittlement studies are going-on, the current paper focused on the effects of alloying elements such as Ni, Cr and Mo on the fracture mechanical properties of the SA508 Gr.4N low alloy steels. Various model alloys were fabricated by changing the contents of alloying elements based on the composition range of the ASME specification. Tensile properties, Charpy impact toughness and fracture toughness of the model alloys were evaluated and those properties were discussed with the microstructural characteristics of each alloy. The strengths of the alloys were increased with increase of the Ni and Mo contents while there was no remarkable change of the yield strength with the Cr addition. The Charpy impact and fracture toughness were considerably improved with the increase of Ni, Cr contents. The Mo addition did not change the toughness properties significantly. The Cr contents were more effective on the fracture toughness through changing the carbides precipitation characteristics and the Ni contents were effective on the Charpy impact toughness through changing the effective grain size.

Sign in / Sign up

Export Citation Format

Share Document