AbstractAerosol transmission has been a pathway for virus spread for many viruses. Similarly, emerging evidence regarding SARS-CoV-2, and the resulting pandemic as declared by WHO in March 2020, determined aerosol transmission for SARS-CoV-2 to be significant. As such, public health officials and professionals have sought data regarding the effect of Heating, Ventilation, and Air Conditioning (HVAC) features to control and mitigate viruses, particularly coronaviruses. A systematic review was conducted using international standards to identify and comprehensively synthesize research examining the effectiveness of ventilation for mitigating transmission of coronaviruses. The results from 32 relevant studies showed that: increased ventilation rate was associated with decreased transmission, transmission probability/risk, infection probability/risk, droplet persistence, virus concentration, and increased virus removal and virus particle removal efficiency; increased ventilation rate decreased risk at longer exposure times; some ventilation was better than no ventilation; airflow patterns affected transmission; ventilation feature (e.g., supply/exhaust, fans) placement influenced particle distribution. Some studies provided qualitative recommendations; however, few provided specific quantitative ventilation parameters suggesting a significant gap in current research. Adapting HVAC ventilation systems to mitigate virus transmission is not a one-solution-fits-all approach but instead requires consideration of factors such as ventilation rate, airflow patterns, air balancing, occupancy, and feature placement.Practical ImplicationsIncreasing ventilation, whether through ventilation rates (ACH, m3/h, m3/min, L/min) or as determined by CO2 levels (ppm), is associated with decreased transmission, transmission probability/risk, infection probability/risk, droplet persistence, and virus concentration, and increased virus removal and efficiency of virus particle removal. As well, professionals should consider the fact that changing ventilation rate or using mixing ventilation is not always the only way to mitigate and control viruses as varying airflow patterns and the use of ventilation resulted in better outcomes than situations without ventilation. Practitioners also need to consider occupancy, ventilation feature (supply/exhaust and fans) placement, and exposure time in conjunction with both ventilation rates and airflow patterns. Some recommendations with quantified data were made, including using an air change rate of 9 h-1 for a hospital ward; waiting six air changes or 2.5 hours before allowing different individuals into an unfiltered office with ∼2 fresh air changes (FCH) and one air change for a high-efficiency MERV or HEPA filtered laboratory; and using a pressure difference between -2 and -25 Pa in negative pressure isolation spaces. Other recommendations for practice included using or increasing ventilation, introducing fresh air, using maximum supply rates, avoiding poorly ventilated spaces, assessing fan placement and potentially increasing ventilation locations, and employing ventilation testing and air balancing checks.
The impact of heating, ventilation, and air conditioning design features on the transmission of viruses, including the 2019 novel coronavirus: a systematic review of ventilation and coronavirus