Polyaniline nanofibers with a high specific surface area and an improved pore structure for supercapacitors

2015 ◽  
Vol 294 ◽  
pp. 16-21 ◽  
Author(s):  
Hailing Xu ◽  
Xingwei Li ◽  
Gengchao Wang
Keyword(s):  
Specific Surface ◽  
Pore Structure ◽  
Surface Area ◽  
Specific Surface Area ◽  
High Specific Surface Area ◽  
Polyaniline Nanofibers

scholarly journals Application of CoMn/CoFe layered double hydroxide based on metal-organic frameworks template to activate peroxymonosulfate for 2, 4-dichlorophenol degradation

2021 ◽  
Author(s):  
Chenyu Liu ◽  
Haitong Wei ◽  
Yanhui Gao ◽  
Ning Wang ◽  
Xiaoying Yuan ◽  
...  
Keyword(s):  
Specific Surface ◽  
Pore Structure ◽  
Surface Area ◽  
Specific Surface Area ◽  
Active Sites ◽  
Metal Organic Frameworks ◽  
High Specific Surface Area ◽  
State Transformation ◽  
Alkaline Conditions ◽  
Metal Organic

Abstract Metal-Organic Frameworks (MOFs) have unique properties and stable structure, which have been widely used as templates/precursors to prepare well-developed pore structure and high specific surface area materials. In this article, an innovative and facile method of crystal reorganization was designed by using MOFs as sacrificial templates to prepare LDH nano-layer sheet structure through a pseudomorphic conversion process under alkaline conditions. The obtained CoMn-LDH and CoFe-LDH catalysts broke the ligand of MOFs and reorganized the structure on the basis of retaining a high specific surface area and a large number of pores, which have higher specific surface area and well-developed pore structure than LDH catalysts prepared by traditional methods, and thus provide more active sites to activate PMS. Due to the unique framework structure of MOFs, the MOF derived CoMn-LDH and CoFe-LDH catalysts could provide more active sites to activate PMS, and achieve a 2, 4-dichlorophenol (2, 4-DCP) degradation of 99.3% and 99.2% within 20 min, respectively. Besides, the two LDH catalysts displayed excellent degradation performance for bisphenol A (BPA), ciprofloxacin (CIP) and 2, 4-dichlorophenoxyacetic acid (2, 4-D). XPS indicated that the valence state transformation of metal elements participated in PMS activation. EPR manifested sulfate radical () and singlet oxygen (1O2) were the main species for degrading pollutants. In addition, after the three-cycle experiment, the CoMn-LDH and CoFe-LDH catalysts also showed long-term stability with a slight activity decrease in the third cycle. The phytotoxicity assessment determined by the germination of mung beans proved that PMS activation by MOFs-derived LDH catalyst can basically eliminate the phytotoxicity of 2, 4-D solution. This research not only developed high-activity LDH catalysts for PMS activation, but also expanded the environmental applications of MOFs derivants.

BCN nanosheets templated by g-C3N4 for high performance capacitive deionization

2018 ◽  
Vol 6 (30) ◽  
pp. 14644-14650 ◽  
Author(s):  
Shiyong Wang ◽  
Gang Wang ◽  
Tingting Wu ◽  
Yunqi Zhang ◽  
Fei Zhan ◽  
...  
Keyword(s):  
Specific Surface ◽  
Pore Structure ◽  
Surface Area ◽  
Specific Surface Area ◽  
High Performance ◽  
Electrode Materials ◽  
High Specific Surface Area ◽  
Capacitive Deionization ◽  
First Time

BCN nanosheets show a pore structure with a high specific surface area and are investigated as CDI electrode materials for the first time.

Longitudinal unzipped carbon nanotubes with high specific surface area and trimodal pore structure

RSC Advances ◽  
2016 ◽  
Vol 6 (11) ◽  
pp. 8661-8668 ◽  
Author(s):  
Joah Han ◽  
Wonbin Kim ◽  
Hyun-Kyung Kim ◽  
Hee-Chang Youn ◽  
Joong Tark Han ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Specific Surface ◽  
Pore Structure ◽  
Surface Area ◽  
Specific Surface Area ◽  
High Specific Surface Area ◽  
Activating Agent

This study reports unzipped carbon nanotubes (CNTs) with a trimodal (micro–meso–macro) pore structure using KOH as the activating agent.

Polyoxometalate modified pine cone biochar carbon for supercapacitor electrodes

2017 ◽  
Vol 5 (8) ◽  
pp. 3939-3947 ◽  
Author(s):  
M. Genovese ◽  
K. Lian
Keyword(s):  
Specific Surface ◽  
Pore Structure ◽  
Surface Area ◽  
Specific Surface Area ◽  
Activated Carbons ◽  
High Specific Surface Area ◽  
Pine Cone ◽  
Redox Active ◽  
Pine Cones

Pine cones were used as a biomass template for the synthesis of activated carbons with high specific surface area (up to 2450 m2 g−1) and a pore structure optimized for the adsorption of redox active polyoxometalate (POM) clusters.

scholarly journals Nanoporous Quasi-High-Entropy Alloy Microspheres

Metals ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 345 ◽  
Author(s):  
Lianzan Yang ◽  
Yongyan Li ◽  
Zhifeng Wang ◽  
Weimin Zhao ◽  
Chunling Qin
Keyword(s):  
Mechanical Properties ◽  
Solid Solution ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
High Specific Surface Area ◽  
High Entropy Alloy ◽  
Face Centered Cubic ◽  
High Entropy ◽  
Hierarchical Porous

High-entropy alloys (HEAs) present excellent mechanical properties. However, the exploitation of chemical properties of HEAs is far less than that of mechanical properties, which is mainly limited by the low specific surface area of HEAs synthesized by traditional methods. Thus, it is vital to develop new routes to fabricate HEAs with novel three-dimensional structures and a high specific surface area. Herein, we develop a facile approach to fabricate nanoporous noble metal quasi-HEA microspheres by melt-spinning and dealloying. The as-obtained nanoporous Cu30Au23Pt22Pd25 quasi-HEA microspheres present a hierarchical porous structure with a high specific surface area of 69.5 m2/g and a multiphase approximatively componential solid solution characteristic with a broad single-group face-centered cubic XRD pattern, which is different from the traditional single-phase or two-phase solid solution HEAs. To differentiate, these are named quasi-HEAs. The synthetic strategy proposed in this paper opens the door for the synthesis of porous quasi-HEAs related materials, and is expected to promote further applications of quasi-HEAs in various chemical fields.

scholarly journals Nanometer Pore Structure Characterization of Taiyuan Formation Shale in the Lin-Xing Area Based on Nitrogen Adsorption Experiments

Minerals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 298
Author(s):  
Chenlong Ding ◽  
Jinxian He ◽  
Hongchen Wu ◽  
Xiaoli Zhang
Keyword(s):  
Specific Surface ◽  
Pore Structure ◽  
Surface Area ◽  
Specific Surface Area ◽  
Shale Gas ◽  
Pore Volume ◽  
Ordos Basin ◽  
Total Pore Volume ◽  
Nitrogen Adsorption ◽  
Taiyuan Formation

Ordos Basin is an important continental shale gas exploration site in China. The micropore structure of the shale reservoir is of great importance for shale gas evaluation. The Taiyuan Formation of the lower Permian is the main exploration interval for this area. To examine the nanometer pore structures in the Taiyuan Formation shale reservoirs in the Lin-Xing area, Northern Shaanxi, the microscopic pore structure characteristics were analyzed via nitrogen adsorption experiments. The pore structure parameters, such as specific surface area, pore volume, and aperture distribution, of shale were calculated; the significance of the pore structure for shale gas storage was analyzed; and the main controlling factors of pore development were assessed. The results indicated the surface area and hole volume of the shale sample to be 0.141–2.188 m2/g and 0.001398–0.008718 cm3/g, respectively. According to the IUPAC (International Union of Pure and Applied Chemistry) classification, mesopores and macropores were dominant in the pore structure, with the presence of a certain number of micropores. The adsorption curves were similar to the standard IV (a)-type isotherm line, and the hysteresis loop type was mainly similar to H3 and H4 types, indicating that most pores are dominated by open type pores, such as parallel plate-shaped pores and wedge-shaped slit pores. The micropores and mesopores provide the vast majority of the specific surface area, functioning as the main area for the adsorption of gas in the shale. The mesopores and macropores provide the vast majority of the pore volume, functioning as the main storage areas for the gas in the shale. Total organic carbon had no notable linear correlation with the total pore volume and the specific surface area. Vitrinite reflectance (Ro) had no notable correlation with the specific surface area, but did have a low “U” curve correlation with the total pore volume. There was no relationship between the quartz content and specific surface area and total pore volume. In addition, there was no notable correlation between the clay mineral content and total specific surface area and total pore volume.

KCl-assisted activation: Moringa oleifera branch-derived porous carbon for high performance supercapacitor

2021 ◽  
Vol 45 (12) ◽  
pp. 5712-5719
Author(s):  
Yongxiang Zhang ◽  
Peifeng Yu ◽  
Mingtao Zheng ◽  
Yong Xiao ◽  
Hang Hu ◽  
...  
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Porous Carbon ◽  
High Performance ◽  
Moringa Oleifera ◽  
High Specific Surface Area ◽  
Porous Carbons

Porous carbons with a high specific surface area (2314–3470 m2 g−1) are prepared via a novel KCl-assisted activation strategy for high-performance supercapacitor.

Sign in / Sign up

Export Citation Format

Share Document