scholarly journals Evaluation of asphalt mixture behavior incorporating warm mix additives and reclaimed asphalt pavement

Author(s):  
Seyed Reza Omranian ◽  
Meor Othman Hamzah ◽  
Lillian Gungat ◽  
Sek Yee Teh
2019 ◽  
Vol 2 (2) ◽  
pp. 149-157
Author(s):  
Hendra Arianto ◽  
Sofyan M. Saleh ◽  
Renni Anggraini

Reuse of reclaimed asphalt pavement material (RAP) is an alternative which applicated for potential enough on the roughness of the road. RAP material can be reused by adding the asphalt and the new aggregate according of the mixture composition so that it is expected will be obtained the quality as planned. One of the efforts made in improving the quality of asphalt mixture RAP material is using a modified asphalt with additional material, such as styrofoam. The use of styrofoam into the asphalt is expected to improve the technical properties of a mixture. The purpose of this research is to know the comparative characteristics of hot mix asphalt (asphalt concrete) type AC-WC that uses RAP material with additional asphalt pen. 60/70 and asphalt pen. 60/70 substitution in the styrofoam by 8%, 10% and 12% against the weight of asphalt based on levels of asphalt left on the material. The initial stages of this study is to conduct an examination of the physical properties of RAP material, then manufacturing a specimen with variations of the addition of asphalt and aggregate new levels based on the job mix diesign (JMD) Bina Marga Aceh (2013). Based on research results, parameter values marshall on all types of asphalt mixture with new aggregate as well as RAP materials and the use of 100% asphalt pen. 60/70 additional or different types of asphalt on OAC has fulfilled the technical specifications defined by the Bina Marga (2014). Best stability values obtained on asphalt mixture using RAP material with additional asphalt pen. 60/70 with 12% styrofoam substitution on OAC JMD Bina Marga Aceh, that amounted to 3,308.72 kg, the lowest value stability retrieved on asphalt mixture using a new aggregate based on the results of Department of Bina Marga Aceh on OAC i.e. of 983.94 kg.


Author(s):  
Baoshan Huang ◽  
Guoqiang Li ◽  
Dragan Vukosavljevic ◽  
Xiang Shu ◽  
Brian K. Egan

This paper presents a laboratory study in which the blending process of reclaimed asphalt pavement (RAP) with virgin mixture was analyzed through controlled experiments. One type of screened RAP was blended with virgin (new) coarse aggregate at different percentages. A blended mixture containing 20% of screened RAP was subjected to staged extraction and recovery. The result from this experiment indicated that only a small portion of aged asphalt in RAP actually participated in the remixing process; other portions formed a stiff coating around RAP aggregates, and RAP functionally acted as “composite black rock.” The resulting composite layered structure was desirable to improve the performance of the hot-mix asphalt mixture.


2012 ◽  
Vol 446-449 ◽  
pp. 2412-2417
Author(s):  
Li Ying Yang ◽  
Yi Qiu Tan ◽  
Hao Liu ◽  
En Guang Li

Reclaimed asphalt pavement (RAP) develops rapidly throughout the world. Hot recycling is one way to make effective use of the waste, but the percentage of RAP in hot recycling is no more than 30%. By way of warm asphalt technology, the percentage of RAP can increase greatly. In this paper, warm recycling is researched. The RAP and the virgin materials including aggregates and asphalt are tested and analyzed. Then, two warm recycling mixtures with different amount of RAP are designed and their properties are investigated. As a comparison, the performances of hot recycling are also tested. At last, the performances of warm recycling and hot recycling are compared and discussed. After the laboratory research, the warm recycling made its debut in Beijing and it exhibit very well, which testifies that warm recycling owns good properties. Warm recycling can make use of pavement waste, and it can decrease the emission and energy consumption. Warm mix is environment-friendly and it is promising in the near future.


Materials ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 3621
Author(s):  
Xiang Ma ◽  
Zhen Leng ◽  
Lili Wang ◽  
Peisheng Zhou

The compactability of an asphalt mixture is related to the heating temperature of the materials, but the heating temperature of reclaimed asphalt pavement (RAP) is limited by the production process of hot-in-plant recycled mixtures. To choose a reasonable heating temperature for RAP according to the compactability, the compaction energy ratio (CER) obtained from the Superpave gyratory compactor compaction curve was developed. The CERs of fourteen kinds of asphalt mixtures made with different RAPs were compared, all of which were different in type, content, and heating temperature. The results indicated that CER is an effective energy index to evaluate the workability of a bituminous mixture, and it considers both the accumulated energy after each gyration and the number of gyrations. It was also found that increasing the heating temperature of the RAP cannot always improve the workability of the recycled mixture, because the higher heating temperature caused more hard-aged bitumen to be blended with soft virgin bitumen during the mixing process. At the same RAP heating temperature, increasing the RAP content made it more difficult to compact the mixture, especially for RAPs with styrene–butadiene–styrene (SBS) modified bitumen, and the recycled mixtures with SBS-modified bitumen were more difficult to compact than those with nonmodified bitumen.


2020 ◽  
Vol 8 (2) ◽  
pp. 15-26
Author(s):  
Hasan H Joni ◽  
Aqeel Y M Alkhafaji

Warm mix Asphalt (WMA) could be mixed and used in paving at low temperatures to minimize the consumption of energy and the emissions of greenhouse gas. Recycled Asphalt pavement (RAP) could save Asphaltic cement and aggregate, which could achieve the better effects of recycling. However, both of the two WMA and RAP technologies have some deficiencies. Warm mix Asphalt and Reclaimed Asphalt pavement (WMA-RAP) technique may solve these issues and deficiencies when they are utilized together. This study investigated the implementations of WMA-RAP and its impacts on the performance of the Asphalt mixture. Under the framework of this study, four percentages of RAP (0%, 20%, 30%, and 40%) were added to the hot mix Asphalt (HMA) and WMA containing 4% Sasobit to study the impact of increasing RAP content on Marshall stability and moisture resistance of Asphalt mixtures. In summary, the Marshall stability of HMA and WMA mixtures is higher than the control mixtures. A small decrease in moisture resistance of both (HMA and WMA) containing RAP comparing to control mixtures Asphalt was observed, as shown by reduced the tensile strength ratios (TSR), but it is still much higher than the minimum of 80%.


Sign in / Sign up

Export Citation Format

Share Document