Determination of gas-water seepage characteristics with consideration of dynamic pore-throat structure in a tight sandstone gas formation

2021 ◽  
pp. 105440
Author(s):  
Guangfeng Liu ◽  
Yifeng Wang ◽  
Hang Yin ◽  
Yaping Ding ◽  
Yifei Lan ◽  
...  
Fuel ◽  
2021 ◽  
pp. 121901
Author(s):  
Guangfeng Liu ◽  
Shuaiting Xie ◽  
Wei Tian ◽  
Juntao Wang ◽  
Siying Li ◽  
...  

2019 ◽  
Vol 16 (1) ◽  
pp. 253-261 ◽  
Author(s):  
Yafei Liu ◽  
Yuhan Shi ◽  
Lei Liu ◽  
Xuecheng Yan ◽  
Desheng Zhou ◽  
...  

2021 ◽  
pp. 014459872199851
Author(s):  
Yuyang Liu ◽  
Xiaowei Zhang ◽  
Junfeng Shi ◽  
Wei Guo ◽  
Lixia Kang ◽  
...  

As an important type of unconventional hydrocarbon, tight sandstone oil has great present and future resource potential. Reservoir quality evaluation is the basis of tight sandstone oil development. A comprehensive evaluation approach based on the gray correlation algorithm is established to effectively assess tight sandstone reservoir quality. Seven tight sandstone samples from the Chang 6 reservoir in the W area of the AS oilfield in the Ordos Basin are employed. First, the petrological and physical characteristics of the study area reservoir are briefly discussed through thin section observations, electron microscopy analysis, core physical property tests, and whole-rock and clay mineral content experiments. Second, the pore type, throat type and pore and throat combination characteristics are described from casting thin sections and scanning electron microscopy. Third, high-pressure mercury injection and nitrogen adsorption experiments are optimized to evaluate the characteristic parameters of pore throat distribution, micro- and nanopore throat frequency, permeability contribution and volume continuous distribution characteristics to quantitatively characterize the reservoir micro- and nanopores and throats. Then, the effective pore throat frequency specific gravity parameter of movable oil and the irreducible oil pore throat volume specific gravity parameter are introduced and combined with the reservoir physical properties, multipoint Brunauer-Emmett-Teller (BET) specific surface area, displacement pressure, maximum mercury saturation and mercury withdrawal efficiency parameters as the basic parameters for evaluation of tight sandstone reservoir quality. Finally, the weight coefficient of each parameter is calculated by the gray correlation method, and a reservoir comprehensive evaluation indicator (RCEI) is designed. The results show that the study area is dominated by types II and III tight sandstone reservoirs. In addition, the research method in this paper can be further extended to the evaluation of shale gas and other unconventional reservoirs after appropriate modification.


2021 ◽  
pp. 105407
Author(s):  
Quanpei Zhang ◽  
Yicang Liu ◽  
Botao Wang ◽  
Jinfeng Ruan ◽  
Na Yan ◽  
...  

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
Fengjuan Dong ◽  
Xuefei Lu ◽  
Yuan Cao ◽  
Xinjiu Rao ◽  
Zeyong Sun

Tight sandstone reservoirs have small pore throat sizes and complex pore structures. Taking the Chang 6 tight sandstone reservoir in the Huaqing area of the Ordos Basin as an example, based on casting thin sections, nuclear magnetic resonance experiments, and modal analysis of pore size distribution characteristics, the Chang 6 tight sandstone reservoir in the study area can be divided into two types: wide bimodal mode reservoirs and asymmetric bimodal mode reservoirs. Based on the information entropy theory, the concept of “the entropy of microscale pore throats” is proposed to characterize the microscale pore throat differentiation of different reservoirs, and its influence on the distribution of movable fluid is discussed. There were significant differences in the entropy of the pore throat radius at different scales, which were mainly shown as follows: the entropy of the pore throat radius of 0.01~0.1 μm, >0.1 μm, and <0.01 μm decreased successively; that is, the complexity of the pore throat structure decreased successively. The correlation between the number of movable fluid occurrences on different scales of pore throats and the entropy of microscale pore throats in different reservoirs is also different, which is mainly shown as follows: in the intervals of >0.1 μm and 0.01~0.1 μm, the positive correlation between the occurrence quantity of movable fluid in the wide bimodal mode reservoir is better than that in the asymmetric bimodal mode reservoir. However, there was a negative correlation between the entropy of the pore throat radius and the number of fluid occurrences in the two types of reservoirs in the pore throat radius of <0.01 μm. Therefore, pore throats of >0.1 μm and 0.01~0.1 μm play a controlling role in studying the complexity of the microscopic pore throat structure and the distribution of movable fluid in the Chang 6 tight sandstone reservoir. The above results deepen the understanding of the pore throat structure of tight sandstone reservoirs and present guiding significance for classification evaluation, quantitative characterization, and efficient development of tight sandstone reservoirs.


2018 ◽  
Vol 36 (5) ◽  
pp. 1061-1085 ◽  
Author(s):  
Kelai Xi ◽  
Yingchang Cao ◽  
Keyu Liu ◽  
Rukai Zhu

Favorable exploration fairway prediction becomes crucial for efficient exploration and development of tight sandstone oil plays due to their relatively poor reservoir quality and strong heterogeneous oil saturation. In order to better understand the factors influencing oil saturation and favorable exploration fairway distribution, petrographic investigation, reservoir properties testing, X-ray diffraction analysis, oil saturation measurement, pressure-controlled mercury injection, and rate-controlled mercury injection were performed on a suite of tight reservoir from the fourth member of the Lower Cretaceous Quantou Formation (K1q4) in the southern Songliao Basin, China. The sandstone reservoirs are characterized by poor reservoir properties and low oil saturations. Reservoir properties between laboratory pressure conditions and in situ conditions are approximately the same, and oil saturations are not controlled by porosity and permeability obviously. Pores are mainly micro-scale, and throats are mainly nano-scale, forming micro- to nano-scale pore–throat system with effective connected pore–throat mainly less than 40%. Oil emplacement mainly occurs through the throats with average radius larger than 0.25 µm under original geological condition. Moreover, the samples with higher oil saturation show more scattered pore and throat distributions, but centered pore–throat radius ratio distribution. Pore–throat volume ratio about 2.3–3.0 is best for oil emplacement, forming high oil saturation. Quartz overgrowth, carbonate cements, and authigenic clays are the major diagenetic minerals. The reservoirs containing about 4–5% carbonate cements are most preferable for oil accumulation, and oil saturation increases with increasing of chlorite as well. The flow zone indicator is a reasonable parameter to predict favorable exploration targets in tight sandstone reservoirs. The reservoirs with flow zone indicator values larger than 0.05 can be regarded as favorable exploration targets in the K1q4 tight sandstones. According to the planar isoline of average flow zone indicator value, the favorable exploration targets mainly distribute in the delta plain distributary channel and deltaic front subaqueous distributary channel.


2019 ◽  
Vol 141 (8) ◽  
Author(s):  
Xiaoxia Ren ◽  
Aifen Li ◽  
Asadullah Memon ◽  
Shuaishi Fu ◽  
Guijuan Wang ◽  
...  

Fracturing is a fundamental technique for enhancing oil recovery of tight sandstone reservoir. The pores in tight reservoirs generally have small radii and generate tremendous capillary force; accordingly, the imbibition effect can significantly affect retention and absorption of the fracturing fluid. In this study, the imbibition behaviors of the fracturing fluid were experimentally investigated, and the effects of interfacial tension, (IFT) permeability, oil viscosity, and the salinity of the imbibition fluid were determined. In addition, combining with nuclear magnetic resonance (NMR)-based core analysis, fluid distribution, and the related variations in imbibition and displacement processes were analyzed. Finally, some key influencing factors of imbibition of the residual fracturing fluid, the difference and correlation between imbibition and displacement, as well as the contribution of imbibition to displacement were explored so as to provide optimization suggestions for guiding the application of oil-displacing fracturing fluid in exploration. Results show that imbibition recovery increased with time, but the imbibition rate gradually dropped. There exists an optimal interfacial tension that corresponds to maximum imbibition recovery. In addition, imbibition recovery increased as permeability and salinity increases and oil viscosity decreases. Furthermore, it was found that extracted oil from the movable pore throat space was almost equal to that from the irreducible pore throat space during imbibition and their contribution in the irreducible pore throat space was greater than in the movable pore throat space in the displacement process. Hence, imbibition plays a more important role during the displacement process in the reservoirs with finer porous structure than previously thought.


Sign in / Sign up

Export Citation Format

Share Document