scholarly journals Modelling the influence of process parameters on precipitate formation in powder-bed fusion additive manufacturing of IN718

2021 ◽  
pp. 109851
Author(s):  
Jakub Mikula ◽  
Rajeev Ahluwalia ◽  
Robert Laskowski ◽  
Kun Wang ◽  
Guglielmo Vastola ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Process Parameters ◽  
Powder Bed Fusion ◽  
Influence Of Process Parameters ◽  
Powder Bed ◽  
Precipitate Formation

scholarly journals Virtual Development of Process Parameters for Bulk Metallic Glass Formation in Laser-Based Powder Bed Fusion

Materials ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 450
Author(s):  
Johan Lindwall ◽  
Andreas Lundbäck ◽  
Jithin James Marattukalam ◽  
Anders Ericsson
Keyword(s):  
Additive Manufacturing ◽  
Metallic Glass ◽  
Bulk Metallic Glass ◽  
Process Parameters ◽  
Glass Formation ◽  
Laser Power ◽  
Powder Bed Fusion ◽  
Powder Bed ◽  
Scanning Strategies ◽  
Hatch Spacing

The development of process parameters and scanning strategies for bulk metallic glass formation during additive manufacturing is time-consuming and costly. It typically involves trials with varying settings and destructive testing to evaluate the final phase structure of the experimental samples. In this study, we present an alternative method by modelling to predict the influence of the process parameters on the crystalline phase evolution during laser-based powder bed fusion (PBF-LB). The methodology is demonstrated by performing simulations, varying the following parameters: laser power, hatch spacing and hatch length. The results are compared in terms of crystalline volume fraction, crystal number density and mean crystal radius after scanning five consecutive layers. The result from the simulation shows an identical trend for the predicted crystalline phase fraction compared to the experimental estimates. It is shown that a low laser power, large hatch spacing and long hatch lengths are beneficial for glass formation during PBF-LB. The absolute values show an offset though, over-predicted by the numerical model. The method can indicate favourable parameter settings and be a complementary tool in the development of scanning strategies and processing parameters for additive manufacturing of bulk metallic glass.

Quasicrystalline Composites by Additive Manufacturing

2019 ◽  
Vol 818 ◽  
pp. 72-76 ◽  
Author(s):  
Konda Gokuldoss Prashanth ◽  
Sergio Scudino
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Selective Laser Melting ◽  
Process Parameters ◽  
Complex Shape ◽  
Powder Bed Fusion ◽  
Laser Melting ◽  
Powder Bed ◽  
Novel Materials ◽  
Tunable Properties

Laser based powder bed fusion (LBPF) or selective laser melting (SLM) is making a leap march towards fabricating novel materials with improved functionalities. An attempt has been made here to fabricate hard quasicrystalline composites via SLM, which demonstrates that the process parameters can be used to vary the phases in the composites. The mechanical properties of the composite depend on their constituents and hence can be varied by varying the process parameters. The results show that SLM not only produces parts with improved functionalities and complex shape but also leads to defined phases and tunable properties.

scholarly journals Laser powder bed fusion of AA7075 alloy: Influence of process parameters on porosity and hot cracking

2020 ◽  
Vol 35 ◽  
pp. 101270 ◽  
Author(s):  
Wojciech Stopyra ◽  
Konrad Gruber ◽  
Irina Smolina ◽  
Tomasz Kurzynowski ◽  
Bogumiła Kuźnicka
Keyword(s):  
Process Parameters ◽  
Hot Cracking ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Influence Of Process Parameters ◽  
Powder Bed

scholarly journals Understanding Laser Powder Bed Fusion Surface Roughness

2020 ◽  
Vol 142 (7) ◽  
Author(s):  
Jacob C. Snyder ◽  
Karen A. Thole
Keyword(s):  
Experimental Study ◽  
Surface Roughness ◽  
Additive Manufacturing ◽  
Process Parameters ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Comprehensive Understanding ◽  
Powder Bed ◽  
Manufacturing Methods ◽  
New Framework

Abstract Surface roughness is a well-known consequence of additive manufacturing methods, particularly powder bed fusion processes. To properly design parts for additive manufacturing, a comprehensive understanding of the inherent roughness is necessary. While many researchers have measured different surface roughness resultant from a variety of parameters in the laser powder bed fusion process, few have succeeded in determining causal relationships due to the large number of variables at play. To assist the community in understanding the roughness in laser powder bed fusion processes, this study explored several studies from the literature to identify common trends and discrepancies amongst roughness data. Then, an experimental study was carried out to explore the influence of certain process parameters on surface roughness. Through these comparisons, certain local and global roughness trends have been identified and discussed, as well as a new framework for considering the effect of process parameters on surface roughness.

scholarly journals Additive Manufacturing of Polypropylene: a Screening Design of Experiment Using Laser-Based Powder Bed Fusion

2018 ◽  
Author(s):  
Inigo Flores Ituarte ◽  
Olli Wiikinkoski ◽  
Anton Jansson
Keyword(s):  
Additive Manufacturing ◽  
Process Parameters ◽  
Design Of Experiment ◽  
Manufacturing Industry ◽  
Tensile Elongation ◽  
Scanning Speed ◽  
Process Window ◽  
Powder Bed Fusion ◽  
Powder Bed ◽  
The Impact

The use of commodity polymers such as polypropylene (PP) is key to open new market segments and applications for the additive manufacturing industry. Technologies such as powder-bed fusion (PBF) can process PP powder; however, much is still to learn concerning process parameters for reliable manufacturing. This study focusses in the process-property relationships of PP using laser-based PBF. The research presents an overview of the intrinsic and the extrinsic characteristic of a commercial PP powder as well as fabrication of tensile specimens with varying process parameters to characterize tensile, elongation at break, and porosity properties. The impact of key process parameters, such as power and scanning speed are systematically modified in a controlled design of experiment. The results were compared to the existing body of knowledge; the outcome is to present a process window and optimal process parameters for industrial use of PP. The computer tomography data revealed a highly porous structure inside specimens ranging between 8.46% and 10.08%, with porosity concentrated in the interlayer planes in the build direction. The results of the design of experiment for this commercial material show a narrow window of 0.122 ≥ Ev ≥ 0.138 J/mm3 led to increased mechanical properties while maintaining geometrical stability.

scholarly journals Spreading of Powders in Powder Bed Additive Manufacturing: an Experimental Approach

2021 ◽  
Author(s):  
Valerio Lampitella ◽  
Marco Trofa ◽  
Antonello Astarita ◽  
Gaetano D’Avino
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Process Parameters ◽  
Experimental Approach ◽  
Physical Mechanism ◽  
Industrial Applications ◽  
Powder Bed Fusion ◽  
Spreading Process ◽  
Powder Bed ◽  
Optimal Window

Powder bed additive manufacturing allows for the production of fully customizable parts and is of great interest for industrial applications. However, the repeatability of the parts and the uniformity of the mechanical properties are still an issue. More specifically, the physical mechanism of the spreading process of the powders, which significantly affects the characteristics of the final part, is not completely understood. In powder bed fusion technologies, the spreading is performed by a device, typically a roller or a blade, that collects the powders from the feedstock and successively deposits them in a layer of several dozens of microns that is then processed with a laser beam. In this work, an experimental approach is developed and employed to study the powder spreading process and analyze in detail the motion of the powders from the accumulation zone to the deposition stage. The presented experiments are carried out on a home-made device that reproduces the spreading process and enables the measurement of the characteristics of the powder bed. Furthermore, the correlation with the process parameters, e.g., the speed of the spreading device, is also investigated. These results can be used to obtain useful insights on the optimal window for the process parameters.

scholarly journals Additive Manufacturing of Polypropylene: A Screening Design of Experiment Using Laser-Based Powder Bed Fusion

Polymers ◽  
2018 ◽  
Vol 10 (12) ◽  
pp. 1293 ◽  
Author(s):  
Iñigo Flores Ituarte ◽  
Olli Wiikinkoski ◽  
Anton Jansson
Keyword(s):  
Additive Manufacturing ◽  
Process Parameters ◽  
Design Of Experiment ◽  
Manufacturing Industry ◽  
Tensile Elongation ◽  
Scanning Speed ◽  
Process Window ◽  
Powder Bed Fusion ◽  
Powder Bed ◽  
The Impact

The use of commodity polymers such as polypropylene (PP) is key to open new market segments and applications for the additive manufacturing industry. Technologies such as powder-bed fusion (PBF) can process PP powder; however, much is still to learn concerning process parameters for reliable manufacturing. This study focusses in the process–property relationships of PP using laser-based PBF. The research presents an overview of the intrinsic and the extrinsic characteristic of a commercial PP powder as well as fabrication of tensile specimens with varying process parameters to characterize tensile, elongation at break, and porosity properties. The impact of key process parameters, such as power and scanning speed, are systematically modified in a controlled design of experiment. The results were compared to the existing body of knowledge; the outcome is to present a process window and optimal process parameters for industrial use of PP. The computer tomography data revealed a highly porous structure inside specimens ranging between 8.46% and 10.08%, with porosity concentrated in the interlayer planes in the build direction. The results of the design of experiment for this commercial material show a narrow window of 0.122 ≥ Ev ≥ 0.138 J/mm3 led to increased mechanical properties while maintaining geometrical stability.

Sign in / Sign up

Export Citation Format

Share Document