Non-noble metal Co as active sites on TiO2 nanorod for promoting photocatalytic H2 production

2019 ◽  
Vol 116 ◽  
pp. 16-21 ◽  
Author(s):  
Wei Chen ◽  
Mei Liu ◽  
Yanhong Wang ◽  
Li Gao ◽  
Haifeng Dang ◽  
...  
Catalysts ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1089
Author(s):  
Lixiao Han ◽  
Cong Peng ◽  
Jinming Huang ◽  
Linhao Sun ◽  
Shengyao Wang ◽  
...  

The construction of highly efficient, low-cost and noble-metal-free photocatalysts depends on photocatalytic technology. Recently, N-rich C3N5 has been explored as a novel carbon nitride material with a much narrower band gap (~2.2 eV) than that of traditional C3N4 (~2.7 eV). Planting noble-metal-free active sites on C3N5 to improve its photocatalytic activity is of great significance. Herein, 2D NixSy nanosheet is facially loaded on 2D C3N5 using a hydrothermal procedure under a low temperature. Due to the quick separation of photogenerated carries between C3N5 and NixSy, this inexpensive noble-metal-free NixSy-C3N5 hybrid nanosheet is highly efficient and stable as a multifunctional catalyst in various applications, including photocatalytic H2 production from water and NO removal. Impressively, the apparent quantum yield (AQY) value for H2 production reaches 37.0% (at 420 nm) on optimal NixSy-C3N5 hybrids, which is much higher than that of Pt-C3N5 material. This work opens an avenue to the fabrication of low-cost and noble-metal-free catalysts for multifunctional photocatalytic applications.


2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Shan Wang ◽  
Aolin Lu ◽  
Chuan-Jian Zhong

AbstractAs a promising substitute for fossil fuels, hydrogen has emerged as a clean and renewable energy. A key challenge is the efficient production of hydrogen to meet the commercial-scale demand of hydrogen. Water splitting electrolysis is a promising pathway to achieve the efficient hydrogen production in terms of energy conversion and storage in which catalysis or electrocatalysis plays a critical role. The development of active, stable, and low-cost catalysts or electrocatalysts is an essential prerequisite for achieving the desired electrocatalytic hydrogen production from water splitting for practical use, which constitutes the central focus of this review. It will start with an introduction of the water splitting performance evaluation of various electrocatalysts in terms of activity, stability, and efficiency. This will be followed by outlining current knowledge on the two half-cell reactions, hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), in terms of reaction mechanisms in alkaline and acidic media. Recent advances in the design and preparation of nanostructured noble-metal and non-noble metal-based electrocatalysts will be discussed. New strategies and insights in exploring the synergistic structure, morphology, composition, and active sites of the nanostructured electrocatalysts for increasing the electrocatalytic activity and stability in HER and OER will be highlighted. Finally, future challenges and perspectives in the design of active and robust electrocatalysts for HER and OER towards efficient production of hydrogen from water splitting electrolysis will also be outlined.


Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 817
Author(s):  
Maria Solakidou ◽  
Yiannis Georgiou ◽  
Yiannis Deligiannakis

Noble metal-TiO2 nanohybrids, NM0-TiO2, (NM0 = Pt0, Pd0, Au0, Ag0) have been engineered by One-Nozzle Flame Spray Pyrolysis (ON-FSP) and Double-Nozzle Flame Spray Pyrolysis (DN-FSP), by controlling the method of noble metal deposition to the TiO2 matrix. A comparative screening of the two FSP methods was realized, using the NM0-TiO2 photocatalysts for H2 production from H2O/methanol. The results show that the DN-FSP process allows engineering of more efficient NM0-TiO2 nanophotocatalysts. This is attributed to the better surface-dispersion and narrower size-distribution of the noble metal onto the TiO2 matrix. In addition, DN-FSP process promoted the formation of intraband states in NM0-TiO2, lowering the band-gap of the nanophotocatalysts. Thus, the present study demonstrates that DN-FSP process is a highly efficient technology for fine engineering of photocatalysts, which adds up to the inherent scalability of Flame Spray Pyrolysis towards industrial-scale production of nanophotocatalysts.


2021 ◽  
Vol 590 ◽  
pp. 82-93
Author(s):  
R. Rameshbabu ◽  
P. Ravi ◽  
Gina Pecchi ◽  
Eduardo J. Delgado ◽  
R.V. Mangalaraja ◽  
...  
Keyword(s):  

Author(s):  
A.R. Mahammed Shaheer ◽  
Nithya Thangavel ◽  
Revathy Rajan ◽  
Daniel Arulraj Abraham ◽  
R. Vinoth ◽  
...  
Keyword(s):  

Author(s):  
Cheng Wang ◽  
Hongyuan Shang ◽  
Hui Xu ◽  
Yukou Du

Non-noble-metal nanoboxes with abundant surface active sites, facilitated electron/mass transport, favorable synergistic effects and electronic effects, serving as promising candidate materials for boosting electrochemical water splitting.


Sign in / Sign up

Export Citation Format

Share Document