Effect of water quench process on mechanical properties of cold rolled dual phase steel microalloyed with niobium

2008 ◽  
Vol 62 (2) ◽  
pp. 327-329 ◽  
Author(s):  
Xuan Liang ◽  
Jun Li ◽  
YingHong Peng
Keyword(s):  
Mechanical Properties ◽  
Dual Phase Steel ◽  
Dual Phase ◽  
Effect Of Water ◽  
Water Quench ◽  
Cold Rolled

scholarly journals Microstructure and Mechanical Properties of a Cold-Rolled Ultrafine-Grained Dual-Phase Steel

Materials ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 1399 ◽  
Author(s):  
Zhiyi Pan ◽  
Bo Gao ◽  
Qingquan Lai ◽  
Xuefei Chen ◽  
Yang Cao ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Dual Phase Steel ◽  
Uniform Elongation ◽  
Processing Route ◽  
Dual Phase ◽  
Dp Steel ◽  
Ultrafine Grained ◽  
Superior Mechanical Properties ◽  
Cold Rolled ◽  
New Processing

A new processing route to produce Ultrafine-Grained Dual-Phase steel has been proposed, involving cold-rolling and subsequent intercritical annealing of a fibrous ferrite–martensite starting structure. Ultrafine-grained DP (UFG-DP) steel with an average ferrite grain size of about ~2.7 μm and an average martensite island size of ~2.9 μm was achieved. Tensile testing revealed superior mechanical properties (the ultimate tensile strength of 1267 MPa and uniform elongation of 8.2%) for the new DP steel in comparison with the fibrous DP steels. The superior mechanical properties are attributed to the influence of microstructure refinement on the work-hardening and fracture behavior.

Study of the Difference in Microstructures and Properties of Cold Rolled Dual Phase Steel with Different Composition

2012 ◽  
Vol 251 ◽  
pp. 351-354
Author(s):  
Hui Wang ◽  
Cheng Jiang Lin ◽  
Zhao Jun Deng ◽  
Ji Bin Liu
Keyword(s):  
Mechanical Properties ◽  
Grain Size ◽  
Tensile Strength ◽  
Yield Strength ◽  
Grain Boundaries ◽  
Dual Phase Steel ◽  
Dual Phase ◽  
High Tensile Strength ◽  
Cold Rolled ◽  
The Difference

The difference in microstructures and properties of 600MPa cold rolled dual phase steel with the different composition had been studied in this paper. It can be noticed that the Si-Mn-Cr steel have finer ferrite and more martensite whose content is about 25%; the Mn-Cr-Mo steel have coarser ferrite and some coarse pearlite as well as little martensite; the microstructures of the Mn-Al-Mo steel are consist of mainly ferrite which have even grain size and 16% martensite which distributed homogenously along the ferrite grain boundaries. The difference in microstructure makes the steel own the different properties. The Si-Mn-Cr steel has the highest tensile strength and yield strength but the worst elongation, the Mn-Cr-Mo steel has the lowest tensile strength, the Mn-Al-Mo steel has the an excellent mechanical properties with low yield strength and high tensile strength as well as higher elongation.

Sign in / Sign up

Export Citation Format

Share Document