Recently, one-dimensional (1D) nanostructures have attracted the scientific community attention as sensitive materials for conductometric chemical sensors. However, finding facile and low-cost techniques for their production, controlling the morphology and the aspect ratio of these nanostructures is still challenging. In this study, we report the vapor-liquid-solid (VLS) synthesis of one dimensional (1D) zinc oxide (ZnO) nanorods (NRs) and nanowires (NWs) by using different metal catalysts and their impact on the performances of conductometric chemical sensors. In VLS mechanism, catalysts are of great interest due to their role in the nucleation and the crystallization of 1D nanostructures. Here, Au, Pt, Ag and Cu nanoparticles (NPs) were used to grow 1D ZnO. Depending on catalyst nature, different morphology, geometry, size and nanowires/nanorods abundance were established. The mechanism leading to the VLS growth of 1D ZnO nanostructures and the transition from nanorods to nanowires have been interpreted. The formation of ZnO crystals exhibiting a hexagonal crystal structure was confirmed by X-ray diffraction (XRD) and ZnO composition was identified using transmission electron microscopy (TEM) mapping. The chemical sensing characteristics showed that 1D ZnO has good and fast response, good stability and selectivity. ZnO (Au) showed the best performances towards hydrogen (H2). At the optimal working temperature of 350 °C, the measured response towards 500 ppm of H2 was 300 for ZnO NWs and 50 for ZnO NRs. Moreover, a good selectivity to hydrogen was demonstrated over CO, acetone and ethanol.
Development of a High Stability Pd-Ni Alloy Thin-Film Coated SAW Device for Sensing Hydrogen