Finite element simulation and experimental investigation of Ti-5Al-2.5Sn titanium alloy during EDM process

2020 ◽  
Author(s):  
Munmun Bhaumik ◽  
Kalipada Maity
Keyword(s):  
Experimental Investigation ◽  
Finite Element ◽  
Titanium Alloy ◽  
Finite Element Simulation ◽  
Element Simulation ◽  
Edm Process

Simulation of hot high-speed yielding of intermetallic titanium alloy VTI-4 under conditions of high-speed loading

2020 ◽  
Vol 0 (12) ◽  
pp. 10-16
Author(s):  
V.V. Avtaev ◽  
◽  
D. V. Grinevich ◽  
A. V. Zavodov
Keyword(s):  
Finite Element ◽  
Titanium Alloy ◽  
Strain Rate ◽  
Finite Element Simulation ◽  
Modulus Of Elasticity ◽  
High Speed ◽  
Residual Deformation ◽  
Test Results ◽  
Element Simulation ◽  
The Relationship

Yielding tests of VTI-4 alloy specimens have been carried out at temperature 1010 °C under conditions of high-speed loading. Based on the test results the modulus of elasticity as well as axial and radial residual deformation values in the end and central zones for each loading stage were determined. Fitting criteria for finite element simulation and the experiment are proposed with tracing VTI-4 alloy diagram deformation at temperature 1010 °C and strain rate of 2.5 sec–1. As a result of finite element simulation the relationship between the material structures obtained during high-speed yielding and the deflected modes in different zones was determined.

Finite Element Simulation of Vacuum Hot Bulge Forming of Titanium Alloy Cylindrical Workpiece

2011 ◽  
Vol 675-677 ◽  
pp. 921-924 ◽  
Author(s):  
Ming Wei Wang ◽  
Chun Yan Wang ◽  
Li Wen Zhang
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Titanium Alloy ◽  
Finite Element Simulation ◽  
Process Parameters ◽  
Fe Model ◽  
Analysis Software ◽  
Forming Process ◽  
Element Simulation ◽  
Cylindrical Workpiece

Vacuum hot bulge forming (VHBF) is becoming an increasingly important manufacturing process for titanium alloy cylindrical workpiece in the aerospace industries. Finite element simulation is an essential tool for the specification of process parameters. In this paper, a two-dimensional nonlinear thermo-mechanical couple FE model was established. Numerical simulation of vacuum hot bulge forming of titanium alloy cylindrical workpiece was carried out using FE analysis software MSC.Marc. The effects of process parameter on vacuum hot bulge forming of BT20 titanium alloy cylindrical workpiece was analyzed by numerical simulation. The proposed an optimized vacuum hot bulge forming process parameters and die size. And the corresponding experiments were carried out. The simulated results agreed well with the experimental results.

Finite Element Simulation and Experimental Research on Micro-Milling Process of Titanium Alloy

2012 ◽  
Vol 522 ◽  
pp. 245-248 ◽  
Author(s):  
Hai Tao Liu ◽  
Ya Zhou Sun ◽  
De Bin Shan ◽  
Yan Quan Geng
Keyword(s):  
Finite Element ◽  
Titanium Alloy ◽  
Finite Element Simulation ◽  
Large Scale ◽  
Simulation Analysis ◽  
Cutting Speed ◽  
Micro Milling ◽  
Element Analysis ◽  
Element Simulation ◽  
Cutting Heat

There are lots of titanium alloy parts which have large-scale micro-structures in astronautic structure and medical implants, so the micro milling becomes one of the effective processing methods in getting the surface micro-structure. Because the titanium alloy has high caking property in processing, it needs a research on the cutting heat and force in order to get better machining precision and surface quality. According to the finite element theory in elastic and plasticity, the influence of cutting speed to the cutting heat and force is got by finite element simulation analysis to the titanium material TC4 in cutting process. It can get the simulation results of cutting heat and force in the micro milling processing by finite element analysis, and then compared, the basic influence which the cutting speed to the cutting heat and force is got. The correctness of the result is checked through cutting experiments.

Sign in / Sign up

Export Citation Format

Share Document