Study on releasing properties and surface group migration of UV-curable silicone modified polyurethane releasing agent

2022 ◽  
Vol 164 ◽  
pp. 106702
Author(s):  
Yufeng Liang ◽  
Lipeng Wang ◽  
Yongping Bai ◽  
Haiyan Qian ◽  
Huifang Xu ◽  
...  
2000 ◽  
Vol 628 ◽  
Author(s):  
Guang-Way Jang ◽  
Ren-Jye Wu ◽  
Yuung-Ching Sheen ◽  
Ya-Hui Lin ◽  
Chi-Jung Chang

This work successfully prepared an UV curable organic-inorganic hybrid material consisting of organic modified colloidal silica. Applications of UV curable organic-inorganic hybrid materials include abrasion resistant coatings, photo-patternable thin films and waveguides. Colloidal silica containing reactive functional groups were also prepared by reacting organic silane and tetraethyl orthosilicate (TEOS) using sol-gel process. In addition, the efficiency of grafting organic moiety onto silica nanoparticles was investigated by applying TGA and FTIR techniques. Experimental results indicated a strong interdependence between surface modification efficiency and solution pH. Acrylate-SiO2 hybrid formation could result in a shifting of thermal degradation temperature of organic component from about 200°C to near 400°C. In addition, the stability of organic modified colloidal silica in UV curable formula and the physical properties of resulting coatings were discussed. Furthermore, the morphology of organic modified colloidal silica was investigated by performing TEM and SEM studies‥


2005 ◽  
Vol 59 (7) ◽  
pp. 1006-1013 ◽  
Author(s):  
Makoto Wakatsuki
Keyword(s):  

2019 ◽  
Author(s):  
Gabriel da Silva

Atmospheric oxidation of isoprene produces significant yields of eight unique nitrate 11 compounds, each with a β- or δ-hydroxy group. These isoprene hydroxy nitrates (ISOPNs) 12 significantly impact upon global NOx budgets, O3 levels, and aerosol formation. 13 Uncertainties exist, however, in our understanding of ISOPN chemistry, particularly in their 14 yields from the reaction of isoprene peroxyl radicals with NO. This study describes novel 15 isomerization reactions of the ISOPNs, identified through the application of computational 16 chemistry techniques. These reactions produce saturated polycyclic orthonitrite compounds 17 via attack of the R–NO2 group on the vinyl moiety. For the δ-hydroxy nitrates, low-energy 18 isomerization pathways exist to six-membered ring compounds that are around 5 kcal mol-1 19 exothermic. These reactions proceed with barriers around 15 kcal mol-1 below the 20 respective peroxyl radical + NO reactants and yield orthonitrites that can further isomerize 21 to β-hydroxy ISOPNs. Moreover, the δ-hydroxy nitrates can directly interconvert with their β 22 substituted counterparts via NO3 group migration, with barriers that are lower yet. It follows 23 that β-hydroxy nitrates may be stabilized in the δ-hydroxy form, and vice versa. Moreover, 24 the lowest-energy pathway for dissociation of the δ-hydroxy ISOPNs is for the formation of 25 β-hydroxy alkoxyl radicals, and because of this established branching fractions between the 26 various isoprene peroxyl radicals may require re-evaluation. The results presented here also 27 suggest that ISOPNs may be stabilized to some extent in their saturated orthonitrite forms, 28 which has implications for both the total nitrate yield and for their subsequent removal by 29 OH, O3, and photolysis.<br><br>


2012 ◽  
Author(s):  
John Jusko ◽  
Glen Baker ◽  
Cody Hone ◽  
Thomas Naguy ◽  
Al Baum ◽  
...  

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2239
Author(s):  
Nicholas Rodriguez ◽  
Samantha Ruelas ◽  
Jean-Baptiste Forien ◽  
Nikola Dudukovic ◽  
Josh DeOtte ◽  
...  

Recent advances in additive manufacturing, specifically direct ink writing (DIW) and ink-jetting, have enabled the production of elastomeric silicone parts with deterministic control over the structure, shape, and mechanical properties. These new technologies offer rapid prototyping advantages and find applications in various fields, including biomedical devices, prosthetics, metamaterials, and soft robotics. Stereolithography (SLA) is a complementary approach with the ability to print with finer features and potentially higher throughput. However, all high-performance silicone elastomers are composites of polysiloxane networks reinforced with particulate filler, and consequently, silicone resins tend to have high viscosities (gel- or paste-like), which complicates or completely inhibits the layer-by-layer recoating process central to most SLA technologies. Herein, the design and build of a digital light projection SLA printer suitable for handling high-viscosity resins is demonstrated. Further, a series of UV-curable silicone resins with thiol-ene crosslinking and reinforced by a combination of fumed silica and MQ resins are also described. The resulting silicone elastomers are shown to have tunable mechanical properties, with 100–350% elongation and ultimate tensile strength from 1 to 2.5 MPa. Three-dimensional printed features of 0.4 mm were achieved, and complexity is demonstrated by octet-truss lattices that display negative stiffness.


2021 ◽  
Vol 154 ◽  
pp. 106156
Author(s):  
Lucas Dall Agnol ◽  
Fernanda Trindade Gonzalez Dias ◽  
Heitor Luiz Ornaghi ◽  
Marco Sangermano ◽  
Otávio Bianchi

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 405
Author(s):  
Demei Lee ◽  
Ya-Ling Tang ◽  
Shih-Jung Liu

We report the fabrication of nanofeatured polymeric films using nanosphere lithography and ultraviolet (UV) soft-mold roller embossing and show an illuminative example of their application to solar cells. To prepare the nanofeatured template, polystyrene nanocolloids of two distinct sizes (900 and 300 nm) were overlaid on silicon substrates using a spin coater. A lab-made soft-mold roller embossing device equipped with a UV light source was adopted. A casting method was employed to replicate the nanofeatured template onto polydimethylsiloxane, which was used as the soft mold. During the embossing procedure, the roller was driven by a step motor and compressed the UV-curable resin against the glass substrate to form the nanofeatured layer, which was subsequently cured by UV radiation. Polymer films with nanoscaled features were thus obtained. The influence of distinct processing variables on the reproducibility of the nanofeatured films was explored. The empirical outcomes demonstrate that UV soft-mold roller embossing offers a simple yet potent way of producing nanofeatured films.


Sign in / Sign up

Export Citation Format

Share Document