New approaches with ATR-FTIR, SEM, and contact angle measurements in the adaptation to extreme conditions of some endemic Gypsophila L. taxa growing in gypsum habitats

Author(s):  
Ayşenur Kayabaş ◽  
Ertan Yildirim
2012 ◽  
Author(s):  
Narjes Shojaikaveh ◽  
Cas Berentsen ◽  
Susanne Eva Johanne Rudolph-Floter ◽  
Karl Heinz Wolf ◽  
William Richard Rossen

2007 ◽  
Vol 330-332 ◽  
pp. 877-880 ◽  
Author(s):  
E.S. Thian ◽  
J. Huang ◽  
Serena Best ◽  
Zoe H. Barber ◽  
William Bonfield

Crystalline hydroxyapatite (HA) and 0.8 wt.% silicon-substituted HA (SiHA) thin films were produced using magnetron co-sputtering. These films were subjected to contact angle measurements and in vitro cell culture study using human osteoblast-like (HOB) cells. A wettability study showed that SiHA has a lower contact angle, and thus is more hydrophilic in nature, as compared to HA. Consequently, enhanced cell growth was observed on SiHA at all time-points. Furthermore, distinct and well-developed actin filaments could be seen within HOB cells on SiHA. Thus, this work demonstrated that the surface properties of the coating may be modified by the substitution of Si into the HA structure.


1992 ◽  
Vol 73 (2-3) ◽  
pp. 163-172 ◽  
Author(s):  
Dietmar Flösch ◽  
Giorgio Clarotti ◽  
Kurt E. Geckeler ◽  
François Schué ◽  
Wolfgang Göpel

2016 ◽  
Vol 869 ◽  
pp. 913-917 ◽  
Author(s):  
Ana Lucia do Amaral Escada ◽  
Javier Andres Muñoz Chaves ◽  
Ana Paula Rosifini Alves Claro

The purpose of this study was to evaluate the TiO2 nanotubes growth and the variation in its diameter to improve the surface properties of Ti-7.5Mo to use for biomedical applications. For the nanotubes TiO2 growth, the samples were anodized in glycerol and ammonium fluoride and divided according to the anodizing potential at 5V to 10V and 24 hour time. The surfaces were examined by scanning electron microscope (SEM), X-ray analysis (XRD) and contact angle measurements. The average tube diameter, ranging in size from 13 to 23 nm, was found to increase with increasing anodizing voltage. It was also observed a decrease in contact angle in accordance with the increase in the anodizing potential. The X-ray analysis showed the presence of anatase phase in samples whose potential was 10V and this condition represents a simple surface treatment for Ti-7.5Mo alloy that has high potential for biomedical applications.


2009 ◽  
Vol 255 (9) ◽  
pp. 4873-4879 ◽  
Author(s):  
Sameer Bargir ◽  
Steve Dunn ◽  
Bruce Jefferson ◽  
Jitka Macadam ◽  
Simon Parsons

Sign in / Sign up

Export Citation Format

Share Document