In this study, iron removal was carried out by the adsorption process as a well-known method of removing heavy metal. Natural bentonite with magnetic properties in a monolithic form or Magnetite-Bentonite-based Monolith (MBM) adsorbent was used as an adsorbent to remove Iron (II) ion from the aqueous solution. The magnetic properties of adsorbents are obtained by adding magnetite (Fe3O4), which is synthesized by the coprecipitation process. The characterization of magnetic properties was performed using the Vibrating Sample Magnetometer (VSM). VSM results showed that the magnetic particles were ferromagnetic. Adsorption efficiency, isotherm model, and adsorption kinetics were investigated in a batch system with iron solution concentration varied from 2 to 10 mg/L and magnetite loading at 2% and 5% w/w. The highest removal efficiency obtained reached 89% with a 5% magnetite loading. The best fit to the data was obtained with the Langmuir isotherm (non-linear) with maximum monolayer adsorption capacity (Qo) at 5% magnetic loading MBM adsorbent is 0.203 mg/g with Langmuir constants KL and aL are 2.055 L/g and 10.122 L/mg respectively. The pseudo-first-order (non-linear) kinetic model provides the best correlation of the experimental data with the rate of adsorption (k1) with magnetite loading 2% and 5%, respectively are 0.024 min-1 and 0.022 min-1.
Source Identification of Trace Elements in Peri-urban Soils in Eastern China
