Non-negligible emissions of black carbon from non-road construction equipment based on real-world measurements in China

Author(s):  
Bobo Wu ◽  
Kaijie Xuan ◽  
Xianbao Shen ◽  
Qiangqiang Zhao ◽  
Yue Shi ◽  
...  
2015 ◽  
Vol 8 (3) ◽  
pp. 2881-2912 ◽  
Author(s):  
J. M. Wang ◽  
C.-H. Jeong ◽  
N. Zimmerman ◽  
R. M. Healy ◽  
D. K. Wang ◽  
...  

Abstract. An automated identification and integration method has been developed to investigate in-use vehicle emissions under real-world conditions. This technique was applied to high time resolution air pollutant measurements of in-use vehicle emissions performed under real-world conditions at a near-road monitoring station in Toronto, Canada during four seasons, through month-long campaigns in 2013–2014. Based on carbon dioxide measurements, over 100 000 vehicle-related plumes were automatically identified and fuel-based emission factors for nitrogen oxides; carbon monoxide; particle number, black carbon; benzene, toluene, ethylbenzene, and xylenes (BTEX); and methanol were determined for each plume. Thus the automated identification enabled the measurement of an unprecedented number of plumes and pollutants over an extended duration. Emission factors for volatile organic compounds were also measured roadside for the first time using a proton transfer reaction time-of-flight mass spectrometer; this instrument provided the time resolution required for the plume capture technique. Mean emission factors were characteristic of the light-duty gasoline dominated vehicle fleet present at the measurement site, with mean black carbon and particle number emission factors of 35 mg kg−1 and 7.7 × 1014 kg−1, respectively. The use of the plume-by-plume analysis enabled isolation of vehicle emissions, and the elucidation of co-emitted pollutants from similar vehicle types, variability of emissions across the fleet, and the relative contribution from heavy emitters. It was found that a small proportion of the fleet (< 25%) contributed significantly to total fleet emissions; 95, 93, 76, and 75% for black carbon, carbon monoxide, BTEX, and particle number, respectively. Emission factors of a single pollutant may help classify a vehicle as a high emitter. However, regulatory strategies to more efficiently target multi-pollutants mixtures may be better developed by considering the co-emitted pollutants as well.


2017 ◽  
Vol 165 ◽  
pp. 155-168 ◽  
Author(s):  
Patricia Krecl ◽  
Christer Johansson ◽  
Admir Créso Targino ◽  
Johan Ström ◽  
Lars Burman

2016 ◽  
Vol 43 (5) ◽  
pp. 480-492 ◽  
Author(s):  
Sharif Mohammad Bayzid ◽  
Yasser Mohamed ◽  
Maria Al-Hussein

Equipment maintenance cost is significant in construction operations budgets. This study proposes a systematic approach to predict maintenance cost of road construction equipment. First, maintenance cost data over more than 10 years was collected from a partner company’s equipment management information system. Data was cleaned and analyzed to obtain a general understanding of maintenance costs trends. Next, traditional cumulative cost models and alternative data mining models were generated to predict maintenance cost based on available equipment and operation attributes. Data mining models were evaluated and validated using portions of the collected data that have not been used in model development. Data collection, analyses, modeling, and validation steps are discussed. The paper also presents the performance of different model types. Based on the case study data, regression model trees performed better than other model types with equipment work hours being the most significant parameter for predicting maintenance cost.


2019 ◽  
Vol 25 (25) ◽  
pp. 1-7
Author(s):  
Mikhail Doudkin ◽  
Alina Kim ◽  
Murat Sakimov

Abstract The lack of a common methodology on compaction theory stimulates developers of road construction equipment to create various approximate methods for their calculation, the number of which, at the present time, is comparable with the nomenclature of the proposed designs of rollers. The article presents the analysis of the deformable shell behavior of a road roller, and the compacted material under its compacting roller, in a situation when a rigid circular shell of the roller is replaced by a forcefully deformable elliptical shape, which, unlike the circular design, allows variation, adjustment and optimization of the road roller impact on the material to be compacted.


Author(s):  
Samson Mekbib Atnaw ◽  
Lakhveer Singh ◽  
Ftwi Yohaness Hagos ◽  
Abu Yousuf

The major share of capital and equipment intensive operation goes to the road sector and the hydro – electric power projects. The construction sector in Ethiopia is developing at a fast rate and its capital budget is increasing from year to year. One of the reasons for this high growth is the number of new construction projects underway and those in the pipeline. In addition, the hydro-electric power projects the government has given a great emphasis to increase the current installed power of 780Mw to a total of 10,000Mw in the coming few years. These hydro-power projects are known for using a great deal of high investment heavy machineries. Therefore, the construction equipment management plays a great role in finalizing the projects with fewer budgets and no time over run. Considering the higher operation, maintenance and investment cost of construction equipment, it is important to have a carefully optimized decision making model that will help in the sizing and selection of the right combination of equipment for a given project. Even the rental versus purchase evaluation needs careful consideration of the project requirement and its duration. This study tries to analyze the existing situation taking a selected company as a case study with regard to construction equipment management. The study tries to cover the equipment management policy of the company, suppliers/manufacturers evaluation and selection criteria, types of purchase processes employed, as well as different make types and capacities of equipment owned by the company. Moreover, capacities of standard facilities available for the central maintenance workshop and replacement plan of equipment of the company in the coming five years will be investigated and commented on.


Author(s):  
R.V. Melnikov ◽  
N.I. Moktitskaya

The development of the Far North goes hand in hand with the use of road construction equipment. The article addresses the main factors that affect the operation of this equipment in extremely cold climates. The effect of low temperatures on the operation of machines and individual units is examined. In particular, information is provided on the effect of low temperatures on operation of the hydraulic drive, power plants, and metal structures. The influence of the requirement to observe the methodological recommendations regarding the ergonomics and physiology of workers on increasing the cost of works with the use of road construction machinery has been noted.


Sign in / Sign up

Export Citation Format

Share Document