Optical-Based Sensing of Shear Strain using Reflective Color Patterns

2022 ◽  
pp. 113372
Author(s):  
Michael A. McGeehan ◽  
Michael E. Hahn ◽  
Salil S. Karipott ◽  
Maryam Shuaib ◽  
Keat G. Ong
Keyword(s):  
Shear Strain ◽  
Color Patterns

Functional significance of preserved color patterns of mollusks from the Gosport Sand (Eocene) of Alabama

1988 ◽  
Vol 62 (01) ◽  
pp. 83-87 ◽  
Author(s):  
Patricia H. Kelley ◽  
Charles T. Swann
Keyword(s):  
Functional Morphology ◽  
Functional Significance ◽  
Intraspecific Variability ◽  
Color Pattern ◽  
Color Patterns ◽  
Historical Factors ◽  
Life Mode ◽  
Molluscan Fauna ◽  
Excellent Preservation ◽  
Architectural Constraints

The excellent preservation of the molluscan fauna from the Gosport Sand (Eocene) at Little Stave Creek, Alabama, has made it possible to describe the preserved color patterns of 15 species. In this study the functional significance of these color patterns is tested in the context of the current adaptationist controversy. The pigment of the color pattern is thought to be a result of metabolic waste disposal. Therefore, the presence of the pigment is functional, although the patterns formed by the pigment may or may not have been adaptive. In this investigation the criteria proposed by Seilacher (1972) for testing the functionality of color patterns were applied to the Gosport fauna and the results compared with life mode as interpreted from knowledge of extant relatives and functional morphology. Using Seilacher's criteria of little ontogenetic and intraspecific variability, the color patterns appear to have been functional. However, the functional morphology studies indicate an infaunal life mode which would preclude functional color patterns. Particular color patterns are instead interpreted to be the result of historical factors, such as multiple adaptive peaks or random fixation of alleles, or of architectural constraints including possibly pleiotropy or allometry. The low variability of color patterns, which was noted within species and genera, suggests that color patterns may also serve a useful taxonomic purpose.

Analysis of magneto rheological elastomers for energy harvesting systems

2020 ◽  
Vol 64 (1-4) ◽  
pp. 439-446
Author(s):  
Gildas Diguet ◽  
Gael Sebald ◽  
Masami Nakano ◽  
Mickaël Lallart ◽  
Jean-Yves Cavaillé
Keyword(s):  
Magnetic Field ◽  
Energy Harvesting ◽  
Shear Strain ◽  
Magnetic Induction ◽  
Magnetic Particles ◽  
Homogeneous Magnetic Field ◽  
Electrical Signal ◽  
Harvesting Systems ◽  
Dc Bias ◽  
Magneto Rheological

Magneto Rheological Elastomers (MREs) are composite materials based on an elastomer filled by magnetic particles. Anisotropic MRE can be easily manufactured by curing the material under homogeneous magnetic field which creates column of particles. The magnetic and elastic properties are actually coupled making these MREs suitable for energy conversion. From these remarkable properties, an energy harvesting device is considered through the application of a DC bias magnetic induction on two MREs as a metal piece is applying an AC shear strain on them. Such strain therefore changes the permeabilities of the elastomers, hence generating an AC magnetic induction which can be converted into AC electrical signal with the help of a coil. The device is simulated with a Finite Element Method software to examine the effect of the MRE parameters, the DC bias magnetic induction and applied shear strain (amplitude and frequency) on the resulting electrical signal.

On the nominal transverse shear strain to characterize the severity of creasing

TAPPI Journal ◽  
2018 ◽  
Vol 17 (04) ◽  
pp. 231-240
Author(s):  
Douglas Coffin ◽  
Joel Panek
Keyword(s):  
Shear Strain ◽  
Transverse Shear ◽  
Elastic Limit ◽  
Experimental Results ◽  
Transverse Shear Strain ◽  
Maximum Strain ◽  
Machine Direction ◽  
Engineering Approach ◽  
Wide Range ◽  
Analytic Expression

A transverse shear strain was utilized to characterize the severity of creasing for a wide range of tooling configurations. An analytic expression of transverse shear strain, which accounts for tooling geometry, correlated well with relative crease strength and springback as determined from 90° fold tests. The experimental results show a minimum strain (elastic limit) that needs to be exceeded for the relative crease strength to be reduced. The theory predicts a maximum achievable transverse shear strain, which is further limited if the tooling clearance is negative. The elastic limit and maximum strain thus describe the range of interest for effective creasing. In this range, cross direction (CD)-creased samples were more sensitive to creasing than machine direction (MD)-creased samples, but the differences were reduced as the shear strain approached the maximum. The presented development provides the foundation for a quantitative engineering approach to creasing and folding operations.

scholarly journals A Monotonic Smeared Truss Model to Predict the Envelope Shear Stress—Shear Strain Curve for Reinforced Concrete Panel Elements under Cyclic Shear

2021 ◽  
Vol 2 (1) ◽  
pp. 174-194
Author(s):  
Luís Bernardo ◽  
Saffana Sadieh
Keyword(s):  
Shear Stress ◽  
Reinforced Concrete ◽  
Shear Strain ◽  
Peak Load ◽  
Strain Curve ◽  
Fiber Reinforced Polymers ◽  
Shear Stresses ◽  
Cyclic Shear ◽  
Concrete Panels ◽  
Truss Model

In previous studies, a smeared truss model based on a refinement of the rotating-angle softened truss model (RA-STM) was proposed to predict the full response of structural concrete panel elements under in-plane monotonic loading. This model, called the “efficient RA-STM procedure”, was validated against the experimental results of reinforced and prestressed concrete panels, steel fiber concrete panels, and reinforced concrete panels externally strengthened with fiber-reinforced polymers. The model incorporates equilibrium and compatibility equations, as well as appropriate smeared constitutive laws of the materials. Besides, it incorporates an efficient algorithm for the calculation procedure to compute the solution points without using the classical trial-and-error technique, providing high numerical efficiency and stability. In this study, the efficient RA-STM procedure is adapted and checked against some experimental data related to reinforced concrete (RC) panels tested under in-plane cyclic shear until failure and found in the literature. Being a monotonic model, the predictions from the model are compared with the experimental envelopes of the hysteretic shear stress–shear strain loops. It is shown that the predictions for the shape (at least until the peak load is reached) and for key shear stresses (namely, cracking, yielding, and maximum shear stresses) of the envelope shear stress–shear strain curves are in reasonably good agreement with the experimental ones. From the obtained results, the efficient RA-STM procedure can be considered as a reliable model to predict some important features of the response of RC panels under cyclic shear, at least for a precheck analysis or predesign.

scholarly journals Factors Affecting the Dependency of Shear Strain of LRB and SHDR: Experimental Study

Actuators ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 98
Author(s):  
Chao-Yong Shen ◽  
Xiang-Yun Huang ◽  
Yang-Yang Chen ◽  
Yu-Hong Ma
Keyword(s):  
Experimental Study ◽  
Low Temperature ◽  
Shear Strain ◽  
Loading Frequency ◽  
Loading Test ◽  
Characteristic Strength ◽  
Rubber Bearing ◽  
Dominant Feature ◽  
Loading Sequence ◽  
G Value

In this research we conducted a sensitivity experimental study where we explored the dependency of the shear strain on the seismic properties of bearings, namely lead rubber bearing (LRB) and super high damping rubber bearing (SHDR). The factors studied were vertical pressure, temperature, shear modulus of the inner rubber (G value), loading frequency, and loading sequence. Six specimens were adopted, i.e., three LRBs and three SHDR bearings. A series of test plans were designed. The seismic characteristics of the bearings were captured through a cyclic loading test, which included post-yield stiffness, characteristic strength, area of a single cycle of the hysteretic loop, equivalent stiffness, and equivalent damping ratio. A whole analysis of variances was then conducted. At the same time, to explore certain phenomena caused by the factors, an extended discussion was carried out. Test results showed that the temperature is the most dominant feature, whereas the G value is the least contributing factor, with the effect of the loading frequency and the loading sequence found between these two. The increment of the post-yielded stiffness for LRB from 100% to 25% is a significant reduction from a low temperature to high one. The slope of the characteristic strength versus the shear strain for LRB under high temperature is larger than the one under low temperature.

Sign in / Sign up

Export Citation Format

Share Document