Hybrid solar still – Liquid desiccant regenerator and water distillation system

Solar Energy ◽  
2019 ◽  
Vol 182 ◽  
pp. 117-133 ◽  
Author(s):  
Dhruvin L. Shukla ◽  
Kalpesh V. Modi
2011 ◽  
Vol 2011 ◽  
pp. 1-5
Author(s):  
Jeremy (Zheng) Li

The clean and pure drinking water is important in today's life but current water sources are usually brackish with bacteria that cannot be used for drinking. About 78% of water available in the sea is salty, 21% of water is brackish, and only 1% of water is fresh. Distillation is one of the feasible processes applied to water purification, and it requires the energy inputs, such as solar radiation. Water is evaporated in this distillation process and water vapor can be separated and condensed to pure water. Now, with the change from conventional fuels to renewable and environment friendly fuels sources, the modern technology allows to use the abundant energy from the sun. It is better to use solar energy to process the water desalination since it is more economical than the use of conventional energies. The main focus of this paper is applying computer-aided modeling and simulation to design a less complex solar water distillation system. The prototype of this solar still system is also built to verify its feasibility, functionality, and reliability. The computational simulation and prototype testing show the reliability and proper functionality of this solar water distillation system.


2014 ◽  
Vol 592-594 ◽  
pp. 2409-2415 ◽  
Author(s):  
S. Naga Sarada ◽  
Banoth Hima Bindu ◽  
Sri Rama R. Devi ◽  
Ravi Gugulothu

In recent years with the exacerbation of energy shortage, water crisis increases around the world. With the continuous increase in the level of greenhouse gas emissions, the use of various sources of renewable energy is increasingly becoming important for sustainable development. Due to the rising oil price and environmental regulations, the demand of utilizing alternative power sources increased dramatically. Alternative energy and its applications have been heavily studied for the last decade. Energy and water are essential for mankind that influences the socioeconomic development of any nation. Pure water resources become more and more scarce every day as rivers, lakes wells and even seawater pollution rapidly increases. Solar energy is one promising solution to secure power and potable water to future generation. The process of distillation can be used to obtain fresh water from salty, brackish or contaminated water. Water is available in different forms such as sea water, underground water, surface water and atmospheric water. Clean water is essential for good health. The search for sustainable energy resources has emerged as one of the most significant and universal concerns in the 21st century. Solar energy conversion offers a cost effective alternative to our traditional usages. Solar energy is a promising candidate in many applications. Among the alternative energy sources used for electricity production, wind and solar energy systems have become more attractive in recent years. For areas where electricity was not available, stand alone wind and solar systems have been increasingly used. The shortage of drinking water in many countries throughout the world is a serious problem. Humankind has depended for ages on river, sea water and underground water reservoirs for its fresh water needs. But these sources do not always prove to be useful due to the presence of excessive salinity in the water. To resolve this crisis, different methods of solar desalination have been used in many countries. Distillation is a well known thermal process for water purification, most importantly, water desalination. Most of the conventional water distillation processes are highly energy consuming and require fossil fuels as well as electric power for their operation. Single basin solar still is a popular solar device used for converting available brackish or waste water into potable water. Because of its lower productivity, it is not popularly used. Numbers of works are under taken to improve the productivity and efficiency of the solar still. There are large numbers of PCMs that melt and solidify at wide range of temperatures, making them attractive in a number of applications. PCMs have been widely used in latent heat thermal storage systems for heat pumps, solar engineering and spacecraft thermal control applications. The use of PCMs for heating and cooling applications for buildings has been investigated within the past decade. The experimental results computed in the field of water distillation process using solar energy in the presence of energy storage materials sodium sulphate and sodium acetate are discussed in this paper. Keywords: solar energy, saline water, distillation, phase change material.


2014 ◽  
Vol 57 ◽  
pp. 2441-2450 ◽  
Author(s):  
Armando Juarez-Trujillo ◽  
Ignacio R. Martín-Domínguez ◽  
M. Teresa Alarcón-Herrera

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Naresh Yarramsetty ◽  
Naveen Sharma ◽  
Modumudi Lakshmi Narayana

Purpose This study aims to investigate the effect of porous material (clay pots) and it is facing on the productivity performance of a pyramid type solar still. The clay pots are placed in the basin facing up and facing down. The numbers of clay pots considered were 9 and 25, and its performance was compared with normal (0 clay pots) solar still. Design/methodology/approach The pyramid solar water distillation system has been designed, fabricated and tested under the actual environmental conditions of Kanchikacherla (16.6834 0N, 80.3904 0E), Andhra Pradesh, India. The solar still is used to produce the fresh water and hot water simultaneously from the brackish (i.e. containing dissolved salts) feed water for domestic applications. From open literature, it was established that the rate of evaporation is higher when the flowing water is held for a longer duration on the black color absorber plate, thereby leading to an increase in productivity of freshwater. Therefore, the pyramid solar still has been tested for smooth absorber plate and the absorber plate with porous heat storage material. Findings The porous material increases the production rate of freshwater compared to a base plate. However, the pyramid still with clay pots has higher productivity at a lower temperature because of the porosity effect. Originality/value The total dissolved solids, electrical conductivity and pH of the distilled water and the saline water have also been measured and compared.


2013 ◽  
Vol 02 (01) ◽  
pp. 57-61 ◽  
Author(s):  
Ghassan A. Al-hassan ◽  
Salem A. Algarni

2020 ◽  
Vol 5 (1) ◽  
pp. 46-52
Author(s):  
Nguyen Viet Linh Le ◽  
Tri Hieu Le ◽  
Thi Minh Hao Dong ◽  
Van Vang Le ◽  
Dinh Tung

Recently, due to global warming and urbanization, there are many major cities that may face the challenge of day zero next decades. Obviously, water is an indispensable component for maintaining life on the earth. Although portable water is required of the hour, the quantity of available freshwater is impacted significantly by sea-level rise and pollution from industrialization. As a consequence of the global water crisis, different methods for clean water production from brackish water have been studied and developed in practice, however, the solar distillation of water is the most economical and desirable approach due to this method utilize solar energy that is the environmentally friendly and economical resource. Over the last 15 years, the impressive price drop of the photovoltaic solar collector (PV/T) makes them popular and easy to access. As a result, the employment of PV/T in solar stills is emerging as a potential device for water distillation. Therefore, in this paper, an active solar distiller combined with a photovoltaic panel has been reviewed for improvement of the distillate yield and effectiveness of solar photovoltaic. This review work presents a variety of studies on various types of solar still (for example conventional solar still (CSS), double slope solar still (DSSS), stepped solar distiller, and cascade solar still) couples with different solar water collectors (such as flat plate collector (FPC) and evacuated tubes collector (ETC)) and solar photovoltaic modules. It is obtained that the hybrid PV/T active solar still improves the distillate yield, energy efficiency, and exergy efficiency as compared to passive mode. The cooling method enhances the performance of the photovoltaic solar collector as well as the productivity of solar still. Moreover, the environmental economic estimation reveals that the solar still coupled with the PV/T mitigated considerably the amount of CO2. It can be stated that it is suitable to commercialize the hybrid PV/T active solar still for supplying not only electricity but drinking water also. Finally, this review paper also suggests the scope for the research in the future.


Author(s):  
Omar O. Badran ◽  
Ismail M. A. Arafat ◽  
Salah A. Abdallah

The main aim of the present study is to draw attention to the possibilities and to the measures of appropriate utilization of renewable energy to achieve what is called “water self-sufficient” for arid regions in Jordan. Also to put efforts of increasing the use of renewable energy sources to lower cost of potable water pumping and gives more economical benefits. Another aim of the current research is to utilize the new control algorithm and the developed computer capabilities in the field of sun tracking in order to improve the efficiency of solar distillers. The new tracking method is utilized for water distillation taking advantage of high possible concentration of parabolic trough collector to reach high levels of daily yield per square meter. The present research utilizes the techniques of image processing to catch the core of the sun as the target, also used artificial intelligence techniques to predict the sun position in abnormal conditions (i.e. cloudy, dusty, rainy). The results of sun tracking using image processing found to be accurate and reliable according to the self monitoring of the focus point validated by the solar radiation results. Water distillation yield shows high percentage output of distillate of about 65% of water supplied to distiller. Mechanical design was tested for high ability to withstand the extra loading. It was found that the output yield reached to noticeable levels, because of the use of the parabolic collector that promoted the solar still efficiency.


2013 ◽  
Author(s):  
Abdlmonem Beitelmal ◽  
Drazen Fabris ◽  
Reece Kiriu

Future water demand is predicted to increase while current resources are continuously depleted. In this paper, a standalone off-the-grid water purification system is designed to provide an economically sustainable model for delivering clean drinking water is presented. This system utilizes concentrated heat generated by solar parabolic troughs to boil brackish water for the distillation process. The water vapor is then condensed into clean drinkable water in a water collection tank. The process of designing and optimizing the solar-powered distillation system (Heat exchanger, boiler, parabolic troughs, tracking and control system, photovoltaic panels and vapor and the heat transfer fluid pumps) and specifically the process of fabricating the parabolic trough is presented and discussed in details. Two troughs were designed and fabricated each with an area of 1.5 m2 (16 ft2). Each trough provides approximately 125 watts/ft. Duratherm 450, a non-toxic, non-hazardous heat transfer fluid (HTF) is selected for the solar trough hot loop. Additional system performance analysis was conducted through experimental testing and through a virtual system model utilizing the Engineering Equation Solver (EES). EES is used to model the heat transfer process of the overall distillation system and a range of optimum HTF flow rates were determined. The experimental results show an increase in water temperature within the boiler for the new range of HTF flow rates. In addition, the results show that the solar troughs are more robust, less expensive to manufacture, operate at a higher temperature and provide a higher performance when compared to a system that utilizes thermal panels. The overall system manufacturing cost is approximately $6000, which includes tracking, a control system and other required distillation components. This system is designed to fit into a standard 20-foot shipping container for ease of transportation worldwide.


2014 ◽  
Vol 18 (suppl.2) ◽  
pp. 347-362 ◽  
Author(s):  
Ali Al-Hamadani ◽  
Shailendra Shukla

An experimental investigation on a passive solar still with myristic acid as phase change material (PCM) is carried out to examine the effect of both the mass of PCM and basin water on the daily distillate output and efficiency of the system under indoor simulated condition. Basic energy balance equations are written to predict the water and glass temperatures, daily distillate output and instantaneous efficiency of the single slope solar distillation system with PCM. It is found that the higher mass of PCM with lower mass of water in the solar still basin significantly increases the daily yield and efficiency, but when the amount of PCM exceeds 20 kg productivity reduces. Therefore, a novel and simple of solar stills with PCM is proposed to enhance the overall productivity of the distillation system. The new solar still has increased the distillate output by 35-40%. The use of inner glass cover temperature for productivity prediction has also been investigated, and the prediction shows relatively better agreement with the experimental data.


2016 ◽  
Vol 3 (1) ◽  
Author(s):  
U. Sahoo ◽  
S. K. Singh ◽  
I. Barbate ◽  
R. Kumar ◽  
P. C. Pant

Sign in / Sign up

Export Citation Format

Share Document