On the combination of nonlinear load effects of structures

2021 ◽  
Vol 90 ◽  
pp. 102064
Author(s):  
Jie Li ◽  
Ruofan Gao
Keyword(s):  
Author(s):  
Thomas B. Johannessen ◽  
Øistein Hagen

Offshore structures are typically required to withstand extreme and abnormal load effects with annual probabilities of occurrence of 10−2 and 10−4 respectively. For linear or weakly nonlinear problems, the load effects with the prescribed annual probabilities of occurrence are typically estimated as a relatively rare occurrence in the short term distribution of 100 year and 10 000 year seastates. For strongly nonlinear load effects, it is not given that an extreme seastate can be used reliably to estimate the characteristic load effect. The governing load may occur as an extremely rare event in a much lower seastate. In attempting to model the load effect in an extreme seastate, the short term probability level is not known nor is it known whether the physics of the wave loading is captured correctly in an extreme seastate. Examples of such strongly nonlinear load effects are slamming loads on large volume offshore structures or wave in deck loads on jacket structures subject to seabed subsidence. Similarly, for structures which are unmanned in extreme weather, the governing load effects for the manned structure will occur as extremely rare events in a relatively frequent seastate. The present paper is concerned with the long term distribution of strongly nonlinear load effects. Using a simple point estimate of the wave elevation correct to second order and a crest kinematics model which takes into account the possibility of wave breaking, the long term distribution of drag load on a column above the still water level is studied and compared with a similar loading model based on second order kinematics which does not include the effect of wave breaking. The findings illustrate the challenges listed above. Model tests are useful in quantifying strongly nonlinear load effects which cannot be calculated accurately. But only a relatively small number of seastates can be run in a model test campaign and it is not feasible to estimate short term responses far beyond the three hour 90% fractile level. Similarly, Computational Fluid Dynamics (CFD) is increasingly useful in investigating complex wave induced load effects. But only a relatively small number of wave events can be run using CFD, a long term analysis of load effects cannot in general be carried out. It appears that there is a class of nonlinear problems which require a long term analysis of the load effect in order for the annual probability of occurrence to be estimated accurately. For problems which cannot be estimated by simple analytical means, the governing wave events can be identified by long term analysis of a simple model which capture the essential physics of the problem and then analysed in detail by use of CFD or model tests.


Author(s):  
Thomas B. Johannessen ◽  
Øystein Lande

Offshore structures are typically required to withstand extreme and abnormal load effects with annual probabilities of occurrence of 10−2 and 10−4 respectively. For linear or weakly nonlinear problems, the load effects with the prescribed annual probabilities of occurrence are typically estimated as a relatively rare occurrence in the short term distribution of 100 year and 10 000 year seastates. For strongly nonlinear load effects, it is not given that an extreme seastate can be used reliably to estimate the characteristic load effect. The governing load may occur as an extremely rare event in a much lower seastate. In attempting to model the load effect in an extreme seastate, the relevant short term probability level is not known nor is it known whether the physics of the wave loading is captured correctly in an extreme seastate. Examples of such strongly nonlinear load effects are slamming loads on large volume offshore structures or wave in deck loads on jacket structures subject to seabed subsidence. The present paper is concerned with the long term distribution of strongly nonlinear load effects and a methodology is proposed which incorporates CFD analysis in a long term Monte Carlo analysis of crest elevations and wave kinematics. Based on a long term time domain simulation of a linear surface elevation, a selection of events is run in CFD in order to obtain a database of linear and corresponding fully nonlinear wave fields with the possibility of wave breaking included. In the subsequent long term analysis, a large linear event is then replaced by the closest matching event in the database. A technique is developed to Froude scale the database results and shift the origin in time and plane so that the database of typically only 100 events give a close match to all the events in the simulation. The method is applied to the simple case of drag loading on a cylinder which is truncated above the still water level such that only the largest waves impact with the structure. It is observed that whereas the Event Matching method agree well with a second order model for return periods lower than 100 years, the loading on the cylinder is significantly larger for longer return periods. The deviation is caused by the increasing dominance of wave braking in the largest crest and illustrates the importance of incorporating wave breaking in the analysis of wave in deck loading problems.


Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3385
Author(s):  
Erickson Puchta ◽  
Priscilla Bassetto ◽  
Lucas Biuk ◽  
Marco Itaborahy Filho ◽  
Attilio Converti ◽  
...  

This work deals with metaheuristic optimization algorithms to derive the best parameters for the Gaussian Adaptive PID controller. This controller represents a multimodal problem, where several distinct solutions can achieve similar best performances, and metaheuristics optimization algorithms can behave differently during the optimization process. Finding the correct proportionality between the parameters is an arduous task that often does not have an algebraic solution. The Gaussian functions of each control action have three parameters, resulting in a total of nine parameters to be defined. In this work, we investigate three bio-inspired optimization methods dealing with this problem: Particle Swarm Optimization (PSO), the Artificial Bee Colony (ABC) algorithm, and the Whale Optimization Algorithm (WOA). The computational results considering the Buck converter with a resistive and a nonlinear load as a case study demonstrated that the methods were capable of solving the task. The results are presented and compared, and PSO achieved the best results.


Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1201
Author(s):  
Daniel dos Santos Mota ◽  
Elisabetta Tedeschi

The Conservative Power Theory (CPT) emerged in recent decades as a theoretical framework for coping with harmonically distorted and unbalanced electric networks of ac power systems with a high participation of converter interfaced loads and generation. The CPT measurements are intrinsically linked to moving averages (MA) over one period of the grid. If the CPT is to be used in a low-inertia isolated-grid scenario, which is subjected to frequency variations, adaptive moving averages (AMA) are necessary. This paper reviews an efficient way of computing MAs and turns it into an adaptive one. It shows that an easily available variable time delay block, from MATLAB, causes steady-state errors in the measurements when the grid frequency varies. A new variable time delay block is, thus, proposed. Nonetheless, natural pulsations in the instantaneous power slip through MAs when the discrete moving average window does not fit perfectly the continuously varying period of the grid. A method consisting of weighing two MAs is reviewed and a new and effective hybrid AMA is proposed. The CPT transducers with the different choices of AMAs are compared via computer simulations of a single-phase voltage source feeding either a linear or a nonlinear load.


Atomic Energy ◽  
2021 ◽  
Author(s):  
V. N. Medvedev ◽  
M. I. Skorikova ◽  
Aleksandr S. Kiselev ◽  
Aleksei S. Kiselev ◽  
V. F. Strizhov ◽  
...  
Keyword(s):  

Electronics ◽  
2021 ◽  
Vol 10 (8) ◽  
pp. 892
Author(s):  
Poornima Udaychandra Panati ◽  
Sridhar Ramasamy ◽  
Mominul Ahsan ◽  
Julfikar Haider ◽  
Eduardo M.G. Rodrigues

The existing solutions for reducing total harmonic distortion (THD) using different control algorithms in shunt active power filters (SAPFs) are complex. This work proposes a split source inverter (SSI)-based SAPF for improving the power quality in a nonlinear load system. The advantage of the SSI topology is that it is of a single stage boost inverter with an inductor and capacitor where the conventional two stages with an intermediate DC-DC conversion stage is discarded. This research proposes inventive control schemes for SAPF having two control loops; the outer control loop regulates the DC link voltage whereas the inner current loop shapes the source current profile. The control mechanism implemented here is an effective, less complex, indirect scheme compared to the existing time domain control algorithms. Here, an intelligent fuzzy logic control regulates the DC link voltage which facilitates reference current generation for the current control scheme. The simulation of the said system was carried out in a MATLAB/Simulink environment. The simulations were carried out for different load conditions (RL and RC) using a fuzzy logic controller (FLC) and PI controllers in the outer loop (voltage control) and hysteresis current controller (HCC) and sinusoidal pulse width modulation (SPWM) in the inner loop (current control). The simulation results were extracted for dynamic load conditions and the results demonstrated that the THD can be reduced to 0.76% using a combination of SPWM and FLC. Therefore, the proposed system proved to be effective and viable for reducing THD. This system would be highly applicable for renewable energy power generation such as Photovoltaic (PV) and Fuel cell (FC).


Sign in / Sign up

Export Citation Format

Share Document