scholarly journals Repeated usage of a motorway automated driving function: Automation level and behavioural adaption

Author(s):  
Barbara Metz ◽  
Johanna Wörle ◽  
Michael Hanig ◽  
Marcus Schmitt ◽  
Aaron Lutz ◽  
...  
Author(s):  
Wyatt McManus ◽  
Jing Chen

Modern surface transportation vehicles often include different levels of automation. Higher automation levels have the potential to impact surface transportation in unforeseen ways. For example, connected vehicles with higher levels of automation are at a higher risk for hacking attempts, because automated driving assistance systems often rely on onboard sensors and internet connectivity (Amoozadeh et al., 2015). As the automation level of vehicle control rises, it is necessary to examine the effect different levels of automation have on the driver-vehicle interactions. While research into the effect of automation level on driver-vehicle interactions is growing, research into how automation level affects driver’s responses to vehicle hacking attempts is very limited. In addition, auditory warnings have been shown to effectively attract a driver’s attention while performing a driving task, which is often visually demanding (Baldwin, 2011; Petermeijer, Doubek, & de Winter, 2017). An auditory warning can be either speech-based containing sematic information (e.g., “car in blind spot”) or non-sematic (e.g., a tone, or an earcon), which can influence driver behaviors differently (Sabic, Mishler, Chen, & Hu, 2017). The purpose of the current study was to examine the effect of level of automation and warning type on driver responses to novel critical events, using vehicle hacking attempts as a concrete example, in a driving simulator. The current study compared how level of automation (manual vs. automated) and warning type (non-semantic vs. semantic) affected drivers’ responses to a vehicle hacking attempt using time to collision (TTC) values, maximum steering wheel angle, number of successful responses, and other measures of response. A full factorial between-subjects design with the two factors made four conditions (Manual Semantic, Manual Non-Semantic, Automated Semantic, and Automated Non-Semantic). Seventy-two participants recruited using SONA ( odupsychology.sona-systems.com ) completed two simulated drives to school in a driving simulator. The first drive ended with the participant safely arriving at school. A two-second warning was presented to the participants three quarters of the way through the second drive and was immediately followed by a simulated vehicle hacking attempt. The warning either stated “Danger, hacking attempt incoming” in the semantic conditions or was a 500 Hz sine tone in the non-semantic conditions. The hacking attempt lasted five seconds before simulating a crash into a vehicle and ending the simulation if no intervention by the driver occurred. Our results revealed no significant effect of level of automation or warning type on TTC or successful response rate. However, there was a significant effect of level of automation on maximum steering wheel angle. This is a measure of response quality (Shen & Neyens, 2017), such that manual drivers had safer responses to the hacking attempt with smaller maximum steering wheel angles. In addition, an effect of warning type that approached significance was also found for maximum steering wheel angle such that participants who received a semantic warning had more severe and dangerous responses to the hacking attempt. The TTC and successful response results from the current experiment do not match those in the previous literature. The null results were potentially due to the warning implementation time and the complexity of the vehicle hacking attempt. In contrast, the maximum steering wheel angle results indicated that level of automation and warning type affected the safety and severity of the participants’ responses to the vehicle hacking attempt. This suggests that both factors may influence responses to hacking attempts in some capacity. Further research will be required to determine if level of automation and warning type affect participants ability to safely respond to vehicle hacking attempts. Acknowledgments. We are grateful to Scott Mishler for his assistance with STISIM programming and Faye Wakefield, Hannah Smith, and Pettie Perkins for their assistance in data collection.


2021 ◽  
Vol 5 (4) ◽  
pp. 16
Author(s):  
Simon Danner ◽  
Alexander Feierle ◽  
Carina Manger ◽  
Klaus Bengler

Context-adaptive functions are not new in the driving context, but even so, investigations into these functions concerning the automation human–machine interface (aHMI) have yet to be carried out. This study presents research into context-adaptive availability notifications for an SAE Level 3 automation in scenarios where participants were surprised by either availability or non-availability. For this purpose, participants (N = 30) took part in a driving simulator study, experiencing a baseline HMI concept as a comparison, and a context-adaptive HMI concept that provided context-adaptive availability notifications with the aim of improving acceptance and usability, while decreasing frustration (due to unexpected non-availability) and gaze deviation from the road when driving manually. Furthermore, it was hypothesized that participants, when experiencing the context-adaptive HMI, would activate the automated driving function more quickly when facing unexpected availability. None of the hypotheses could be statistically confirmed; indeed, where gaze behavior was concerned, the opposite effects were found, indicating increased distraction induced by the context-adaptive HMI. However, the trend in respect to the activation time was towards shorter times with the context-adaptive notifications. These results led to the conclusion that context-adaptive availability notifications might not always be beneficial for users, while more salient availability notifications in the case of an unexpected availability could be advantageous.


Author(s):  
Frederik Naujoks ◽  
Christian Purucker ◽  
Katharina Wiedemann ◽  
Claus Marberger

Objective: This study aimed at investigating the driver’s takeover performance when switching from working on different non–driving related tasks (NDRTs) while driving with a conditionally automated driving function (SAE L3), which was simulated by a Wizard of Oz vehicle, to manual vehicle control under naturalistic driving conditions. Background: Conditionally automated driving systems, which are currently close to market introduction, require the user to stay fallback ready. As users will be allowed to engage in more complex NDRTs during the automated drive than when driving manually, the time needed to regain full manual control could likely be increased. Method: Thirty-four users engaged in different everyday NDRTs while driving automatically with a Wizard of Oz vehicle. After approximately either 5 min or 15 min of automated driving, users were requested to take back vehicle control in noncritical situations. The test drive took place in everyday traffic on German freeways in the metropolitan area of Stuttgart. Results: Particularly tasks that required users to turn away from the central road scene or hold an object in their hands led to increased takeover times. Accordingly, increased variance in the driver’s lane position was found shortly after the switch to manual control. However, the drivers rated the takeover situations to be mostly “harmless.” Conclusion: Drivers managed to regain control over the vehicle safely, but they needed more time to prepare for the manual takeover when the NDRTs caused motoric workload. Application: The timings found in the study can be used to design comfortable and safe takeover concepts for automated vehicles.


Author(s):  
Christoph Sippl ◽  
Florian Bock ◽  
Christoph Lauer ◽  
Aaron Heinz ◽  
Thomas Neumayer ◽  
...  

Electronics ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 788
Author(s):  
Johannes Rumetshofer ◽  
Michael Stolz ◽  
Daniel Watzenig

In the development of Level 4 automated driving functions, very specific, but diverse, requirements with respect to the operational design domain have to be considered. In order to accelerate this development, it is advantageous to combine dedicated state-of-the-art software components, as building blocks in modular automated driving function architectures, instead of developing special solutions from scratch. However, e.g., in local motion planning and control, the combination of components is still limited in practice, due to necessary interface alignments, which might yield sub-optimal solutions and additional development overhead. The application of generic interfaces, which manage the data transfer between the software components, has the potential to avoid these drawbacks and hence, to further boost this development approach. This publication contributes such a generic interface concept between the local path planning and path tracking systems. The crucial point is a generalization of the lateral tracking error computation, based on an introduced error classification. It substantiates the integration of an internal reference path representation into the interface, to resolve the component interdependencies. The resulting, proposed interface enables arbitrary combinations of components from a comprehensive set of state-of-the-art path planning and tracking algorithms. Two interface implementations are finally applied in an exemplary automated driving function assembly task.


Information ◽  
2020 ◽  
Vol 11 (2) ◽  
pp. 114 ◽  
Author(s):  
Barbara Metz ◽  
Johanna Wörle ◽  
Michael Hanig ◽  
Marcus Schmitt ◽  
Aaron Lutz

Most studies on users’ perception of highly automated driving functions are focused on first contact/single usage. Nevertheless, it is expected that with repeated usage, acceptance and usage of automated driving functions might change this perception (behavioural adaptation). Changes can occur in drivers’ evaluation, in function usage and in drivers’ reactions to take-over situations. In a driving simulator study, N = 30 drivers used a level 3 (L3) automated driving function for motorways during six experimental sessions. They were free to activate/deactivate that system as they liked and to spend driving time on self-chosen side tasks. Results already show an increase of experienced trust and safety, together with an increase of time spent on side tasks between the first and fourth sessions. Furthermore, attention directed to the road decreases with growing experience with the system. The results are discussed with regard to the theory of behavioural adaptation. Results indicate that the adaptation of acceptance and usage of the highly automated driving function occurs rather quickly. At the same time, no behavioural adaptation for the reaction to take-over situations could be found.


Sign in / Sign up

Export Citation Format

Share Document