Calcium effect on the metabolic pathway of phosphorus accumulating organisms in enhanced biological phosphorus removal systems

2015 ◽  
Vol 84 ◽  
pp. 171-180 ◽  
Author(s):  
Hai-Ling Zhang ◽  
Guo-Ping Sheng ◽  
Wei Fang ◽  
Yong-Peng Wang ◽  
Cai-Yun Fang ◽  
...  
2006 ◽  
Vol 53 (12) ◽  
pp. 29-37 ◽  
Author(s):  
R. Barat ◽  
T. Montoya ◽  
L. Borras ◽  
A. Seco ◽  
J. Ferrer

The role of calcium (Ca) in enhanced biological phosphorus removal and its possible implications on the metabolic pathway have been studied. The experience has been carried out in an SBR under anaerobic–aerobic conditions for biological phosphorus removal during 8 months. The variations of influent Ca concentration showed a clear influence on the EBPR process, detecting significant changes in YPO4. These YPO4 variations were not due to influent P/COD ratio, pH, denitrification and calcium phosphate formation. The YPO4 has been found to be highly dependent on the Ca concentration, increasing as Ca concentration decreases. The results suggest that high Ca concentrations produce “inert” granules of polyphosphate with Ca as a counterion that are not involved in P release and uptake. Furthermore, microbiological observations confirmed that appreciable changes in PAO and GAO populations were not observed. This behaviour could suggest a change in the bacterial metabolic pathway, with prevailing polyphosphate-accumulating metabolism (PAM) at low influent Ca concentration and glycogen-accumulating metabolism (GAM) at high concentration.


2006 ◽  
Vol 41 (1) ◽  
pp. 72-83 ◽  
Author(s):  
Zhe Zhang ◽  
Eric R. Hall

Abstract Parameter estimation and wastewater characterization are crucial for modelling of the membrane enhanced biological phosphorus removal (MEBPR) process. Prior to determining the values of a subset of kinetic and stoichiometric parameters used in ASM No. 2 (ASM2), the carbon, nitrogen and phosphorus fractions of influent wastewater at the University of British Columbia (UBC) pilot plant were characterized. It was found that the UBC wastewater contained fractions of volatile acids (SA), readily fermentable biodegradable COD (SF) and slowly biodegradable COD (XS) that fell within the ASM2 default value ranges. The contents of soluble inert COD (SI) and particulate inert COD (XI) were somewhat higher than ASM2 default values. Mixed liquor samples from pilot-scale MEBPR and conventional enhanced biological phosphorus removal (CEBPR) processes operated under parallel conditions, were then analyzed experimentally to assess the impact of operation in a membrane-assisted mode on the growth yield (YH), decay coefficient (bH) and maximum specific growth rate of heterotrophic biomass (µH). The resulting values for YH, bH and µH were slightly lower for the MEBPR train than for the CEBPR train, but the differences were not statistically significant. It is suggested that MEBPR simulation using ASM2 could be accomplished satisfactorily using parameter values determined for a conventional biological phosphorus removal process, if MEBPR parameter values are not available.


1994 ◽  
Vol 29 (7) ◽  
pp. 153-156 ◽  
Author(s):  
D. Wedi ◽  
P. A. Wilderer

Most of the fundamental processes responsible for enhanced biological phosphorus removal (EBPR) were obtained through laboratory tests under defined conditions with pure or enriched cultures. Acinetobacter sp. was identified as the most important group of bacteria responsible for bio-P removal. Full scale data showed, however, that laboratory results do not match full scale results well enough. There is a lack of data on the effects of sub-optimal process conditions such as inadequate availability of volatile fatty acids (VFA), high nitrate recycle, storm water inflow or low temperatures. In this paper the results of full scale experiments on P-release are presented and compared with theoretical values. Measurements at a full scale Phoredox-system showed a surprisingly low P-release in the anaerobic reactor. Only 4 to 10% of the phosphorus in the activated sludge was released in the bulk liquid. With laboratory batch-tests, a maximum of 20% of the P in the sludge could be released. It is assumed that under the prevailing process conditions either the fraction of Acinetobacter sp. was very small, or bacteria other than Acinetobacter sp. were responsible for the P-removal, or most of the phosphorus was bound chemically but mediated by biological processes.


1998 ◽  
Vol 37 (4-5) ◽  
pp. 609-613
Author(s):  
J. Pramanik ◽  
P. L. Trelstad ◽  
J. D. Keasling

Enhanced biological phosphorus removal (EBPR) in wastewater treatment involves metabolic cycling through the biopolymers polyphosphate (polyP), polyhydroxybutyrate (PHB), and glycogen. This cycling is induced through treatment systems that alternate between carbon-rich anaerobic and carbon-poor aerobic reactor basins. While the appearance and disappearance of these biopolymers has been documented, the intracellular pressures that regulate their synthesis and degradation are not well understood. Current models of the EBPR process have examined a limited number of metabolic pathways that are frequently lumped into an even smaller number of “reactions.” This work, on the other hand, uses a stoichiometric model that contains a complete set of the pathways involved in bacterial biomass synthesis and energy production to examine EBPR metabolism. Using the stoichiometric model we were able to analyze the role of EBPR metabolism within the larger context of total cellular metabolism, as well as predict the flux distribution of carbon and energy fluxes throughout the total reaction network. The model was able to predict the consumption of PHB, the degradation of polyP, the uptake of acetate and the release of Pi. It demonstrated the relationship between acetate uptake and Pi release, and the effect of pH on this relationship. The model also allowed analysis of growth metabolism with respect to EBPR.


2000 ◽  
Vol 41 (4-5) ◽  
pp. 503-508 ◽  
Author(s):  
R.F. Gonçalves ◽  
F. Rogalla

This work describes laboratory scale research about Enhanced Biological Phosphorus Removal (EBPR) in a submerged biofilter under Anaerobic/Oxic (A/O) alternation and continuous feed. Its main purpose is to detail the behaviour of the reactor throughout the anaerobic and the aerobic phases of the A/O cycle, to study the importance of the anaerobic phase in the selection of the EBPR bacteria in the biofilm and to evaluate the consumption and the importance of the organic substrate during the anaerobic phase. The mass balance over the Phosphorus (P) element indicates that long anaerobic phases (6 h) are more efficient than short ones (3 h) as a selector of EBPR bacteria in biofilms. In both comparisons, thespecific mass of P released in a 6 h period represents almost 50% more than the amount of P release in the shorter period (3 h). However, the presence of rapidly biodegradable COD in the influent of the anaerobic phase is a more effective selector, more important than the duration of the anaerobic phase: by doubling the amount of acetic acid in the influent, a similar 50% increase of P-release can be achieved at short anaerobic periods of 3 h. The effect of the strategy adopted in this study, focusing on selecting EBPR bacteria in biofilm, is shown by the P levels of 4% (total P/SST) in the sludge removed from the BF by backwashing in all periods.


2015 ◽  
Vol 2015 (10) ◽  
pp. 3527-3541
Author(s):  
Alyssa Mayer ◽  
Dan Miklos ◽  
Joe Rohrbacher ◽  
Katya Bilyk ◽  
Sarah Galst

Sign in / Sign up

Export Citation Format

Share Document