A simple method of determining the dispersion of a solid material from the reflectance interferogram of sheet material

In the present work, the properties of bioester from Samrong oil (Sterculia Foetida) and characteristics of cellulose solid catalyst are described. Heterogeneous catalyst was prepared via carbonization, sulfonation and purification giving solid catalyst as brown powder. Control parameters were time and temperature of carbonization and sulfonation reaction, ratio of sulfuric acid to solid material and weight of solid material. The optimized carbonization condition was 300 °C for 15 h. The sulfonation temperature was 150 oC for 18 h under N2 producing 7.99 mmol/g of acid concentration on solid catalyst. The acidity in water of solid catalyst after purification and drying was decreasing. The results of biodiesel production showed that the triglyceride could be converted to biodiesel directly by one-step sulfonic acid catalyzed process. The experimental condition of reaction process was 3.0 M of catalyst concentration with 9:1 M ratio of methanol to triglyceride at the temperature of 80 °C. This catalysts provided high reactivity of transesterification. The present procedure represents a simple method for biodiesel production with a short reaction time and with moderate conversion rate.

Download Full-text

Effects of Ion Beam Milling on Surface Topography

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100070862 ◽

1973 ◽

Vol 31 ◽

pp. 84-85

Author(s):

P.G. Pawar ◽

P. Duhamel ◽

G.W. Monk

Keyword(s):

Surface Topography ◽

Ion Beam ◽

Solid Material ◽

Beam Current ◽

Atomic Mass ◽

Micro Milling ◽

Ion Milling ◽

Controlled Atmospheres ◽

Milling Operations ◽

Sufficient Energy

A beam of ions of mass greater than a few atomic mass units and with sufficient energy can remove atoms from the surface of a solid material at a useful rate. A system used to achieve this purpose under controlled atmospheres is called an ion miliing machine. An ion milling apparatus presently available as IMMI-III with a IMMIAC was used in this investigation. Unless otherwise stated, all the micro milling operations were done with Ar+ at 6kv using a beam current of 100 μA for each of the two guns, with a specimen tilt of 15° from the horizontal plane.It is fairly well established that ion bombardment of the surface of homogeneous materials can produce surface topography which resembles geological erosional features.

Download Full-text

A simple way for producing holographic filters suitable for image improvement

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100108271 ◽

1978 ◽

Vol 36 (1) ◽

pp. 226-227

Author(s):

K.-H. Herrmann ◽

E. Reuber ◽

P. Schiske

Keyword(s):

Transfer Functions ◽

Diffraction Order ◽

Lateral Position ◽

Simple Method ◽

Spatial Frequencies ◽

Resolution Electron ◽

Wiener Filters ◽

Image Improvement ◽

Optical Reconstruction ◽

Set Up

Aposteriori deblurring of high resolution electron micrographs of weak phase objects can be performed by holographic filters [1,2] which are arranged in the Fourier domain of a light-optical reconstruction set-up. According to the diffraction efficiency and the lateral position of the grating structure, the filters permit adjustment of the amplitudes and phases of the spatial frequencies in the image which is obtained in the first diffraction order.In the case of bright field imaging with axial illumination, the Contrast Transfer Functions (CTF) are oscillating, but real. For different imageforming conditions and several signal-to-noise ratios an extensive set of Wiener-filters should be available. A simple method of producing such filters by only photographic and mechanical means will be described here.A transparent master grating with 6.25 lines/mm and 160 mm diameter was produced by a high precision computer plotter. It is photographed through a rotating mask, plotted by a standard plotter.

Download Full-text

Rotary Beveling for In Situ Thin-Section Microscopy of Cell Cultures

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100099192 ◽

1981 ◽

Vol 39 ◽

pp. 550-551

Author(s):

Dean A. Handley ◽

Jack T. Alexander ◽

Shu Chien

Keyword(s):

Cell Growth ◽

Cell Cultures ◽

Molecular Interactions ◽

Convenient Method ◽

Petri Dish ◽

Simple Method ◽

Thin Section Microscopy ◽

Thin Sectioning ◽

Organic Fluids

In situ preparation of cell cultures for ultrastructural investigations is a convenient method by which fixation, dehydration and embedment are carried out in the culture petri dish. The in situ method offers the advantage of preserving the native orientation of cell-cell interactions, junctional regions and overlapping configurations. In order to section after embedment, the petri dish is usually separated from the polymerized resin by either differential cryo-contraction or solvation in organic fluids. The remaining resin block must be re-embedded before sectioning. Although removal of the petri dish may not disrupt the native cellular geometry, it does sacrifice what is now recognized as an important characteristic of cell growth: cell-substratum molecular interactions. To preserve the topographic cell-substratum relationship, we developed a simple method of tapered rotary beveling to reduce the petri dish thickness to a dimension suitable for direct thin sectioning.

Download Full-text

Contrast and Resolution in Alfresco Microscopy and Thick Specimens

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100096102 ◽

1972 ◽

Vol 30 ◽

pp. 570-571

Author(s):

J. R. Sellar ◽

J. M. Cowley

Keyword(s):

Solid Material ◽

Cell Design ◽

Current Interest ◽

High Voltage Electron Microscopy ◽

Voltage Electron ◽

Transmission Electron ◽

Environmental Cell ◽

Scanning Transmission ◽

Conventional Transmission Electron Microscope ◽

Transmission Microscope

Current interest in high voltage electron microscopy, especially in the scanning mode, has prompted the development of a method for determining the contrast and resolution of images of specimens in controlled-atmosphere stages or open to the air, hydrated biological specimens being a good example. Such a method would be of use in the prediction of microscope performance and in the subsequent optimization of environmental cell design for given circumstances of accelerating voltage, cell gas pressure and constitution, and desired resolution.Fig. 1 depicts the alfresco cell of a focussed scanning transmission microscope with a layer of gas L (and possibly a thin window W) between the objective O and specimen T. Using the principle of reciprocity, it may be considered optically equivalent to a conventional transmission electron microscope, if the beams were reversed. The layer of gas or solid material after the specimen in the STEM or before the specimen in TEM has no great effect on resolution or contrast and so is ignored here.

Download Full-text