scholarly journals Biodiesel Production from Sterculia foetida Oil by Using Solid Support Catalyst

2016 ◽  
Vol 855 ◽  
pp. 98-102
Author(s):  
Anusorn Vorasingha

In the present work, the properties of bioester from Samrong oil (Sterculia Foetida) and characteristics of cellulose solid catalyst are described. Heterogeneous catalyst was prepared via carbonization, sulfonation and purification giving solid catalyst as brown powder. Control parameters were time and temperature of carbonization and sulfonation reaction, ratio of sulfuric acid to solid material and weight of solid material. The optimized carbonization condition was 300 °C for 15 h. The sulfonation temperature was 150 oC for 18 h under N2 producing 7.99 mmol/g of acid concentration on solid catalyst. The acidity in water of solid catalyst after purification and drying was decreasing. The results of biodiesel production showed that the triglyceride could be converted to biodiesel directly by one-step sulfonic acid catalyzed process. The experimental condition of reaction process was 3.0 M of catalyst concentration with 9:1 M ratio of methanol to triglyceride at the temperature of 80 °C. This catalysts provided high reactivity of transesterification. The present procedure represents a simple method for biodiesel production with a short reaction time and with moderate conversion rate.

Author(s):  
I Nengah Simpen ◽  
I Made Sutha Negara ◽  
Sofyan Dwi Jayanto

Biodiesel production from waste cooking oil in two steps reaction of esterification and transesterification is low efficient, due to twice methanol consumption and need more reaction time. Optimizing reaction conditions of CaO as a matrix of solid catalyst prepared from crab shell (green CaO) and modified by K2O/TiO2 for converting waste cooking oil to biodiesel have been carried out. Catalytic process of waste cooking oil to biodiesel took place in one step reaction of esterification and transesterification. The research result showed that optimum conditions in its one step reaction such as methanol to oil molar ratio was 9:1, amount of CaO/K2O-TiO2 catalyst to oil was 5% and reaction time of 60 minutes with biodiesel yield was 88.24%. Physical and chemical properties of biodiesel which produced from one step reaction of esterification and transesterification of waste cooking oil were suitable with Indonesian National Standard (SNI-04-7182-2006) namely density at 40oC of 850 kg/m3, kinematic viscosity at 40oC of 3.32 cSt, water content of 0.046%, iodine number of 59.25 g I2/100g and acid value of 0.29 mg KOH/g. Gas chromatography-mass spectrometry (GC-MS) analysis of biodiesel formed fatty acid methyl esters from conversion of waste cooking oil.


2012 ◽  
Vol 512-515 ◽  
pp. 1615-1618
Author(s):  
Jian Zhang ◽  
Xuan Jun Wang

Effects of mole rate of methanol/oil, reaction time and technology on the free fatty acid ( FFA) level decrease of Zanthoxylum bungeanum seed oil with sulfuric acid as catalyst was investigated. Results show that, the acid level decreases with the mole rate of methanol/oil increases when the sulfuric acid is 2% based on the weight of Zanthoxylum bungeanum seed oil and reacting at 60°C for 2h. When the mole rate is 20~35∶1, the final acid value is less than 2mgKOH/g which meets the requirement for biodiesel production. When the mole rate is 25∶1, with sulfuric acid dosage 2% and reacting at 60°C, the acid value decreases fast at the beginning of the acid esterification. The acid value of ZSO was reduced to 1.56 mg KOH/g from 78.91 mg KOH/g by only one-step acid-catalyzed esterification with methanol-to-oil molar ratio 30:1, H2SO4 2%, temperature 60°C and reaction time 60 min, which was selected as optimum for the acid-catalyzed esterification.


2019 ◽  
Vol 2019 ◽  
pp. 1-7 ◽  
Author(s):  
Javier Toledo Arana ◽  
Juan José Torres ◽  
Diego F. Acevedo ◽  
Cristian O. Illanes ◽  
Nelio A. Ochoa ◽  
...  

Biodiesel is the best candidate for fuel oil replacement, and to obtain it, heterogeneous catalysts offer large advantages: they can be separated from the product and reused. This work reviews a novel one-step synthesis of CaO-ZnO catalytic particles suitable for biodiesel production. The catalyst is synthesized using an original simple method that involves mixing of ZnO with CaCO3 and subsequent calcination. The CaO-ZnO microparticles obtained present an average size of 2 μm. This material shows the characteristic crystallographic cubic structure of CaO and the hexagonal phase of ZnO. The temperature-programmed reduction experiment evidences an interaction between CaO and ZnO. Moreover, the infrared spectroscopy shows typical bands of these compounds. The catalyst shows high biodiesel yield, up to 73% in the first cycle and 64% in the second one. In this work, the synthesis of an efficient CaO-ZnO catalyst with a huge potential is revealed, which could be an economic alternative to produce biodiesel.


2013 ◽  
Vol 834-836 ◽  
pp. 550-554 ◽  
Author(s):  
Warakom Suwanthai ◽  
Vittaya Punsuvon ◽  
Pilanee Vaithanomsat

In this research, calcium methoxide was synthesized as solid base catalyst from quick lime for biodiesel production. The catalyst was further characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), attenuated total reflection fourier transform (ATR-FTIR) and Energy-dispersive X-ray spectroscopies (EDX) to evaluate its performance. The transesterification of refined palm oil using calcium methoxide and the process parameters affecting the fatty acid methyl ester (FAME) content such as catalyst concentration, methanol:oil molar ratio and reaction time were investigated. The results showed that the FAME content at 97% was achieved within 3 h using 3 %wt catalyst loading, 12:1 methanol:oil molar ratio and 65 °C reaction temperature. The result of FAME suggested calcium methoxide was the promising solid catalyst for substitution of the conventional liquid catalyst.


Catalysts ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 34
Author(s):  
Devendra P. Tekale ◽  
Ganapati D. Yadav ◽  
Ajay K. Dalai

Value addition to glycerol, the sole co-product in biodiesel production, will lead to reform of the overall biodiesel economy. Different valuable chemicals can be produced from glycerol using heterogeneous catalysis and these valuable chemicals are useful in industries such as cosmetics, pharmaceuticals, fuels, soap, paints, and fine chemicals. Therefore, the conversion of glycerol to valuable chemicals using heterogeneous catalysis is a noteworthy area of research. Etherification of glycerol with alkenes or alcohols is an important reaction in converting glycerol to various value-added chemicals. This article describes reaction of glycerol with benzyl alcohol in solvent-free medium by using a clay supported modified heteropolyacid (HPA), Cs2.5H0.5PW12O40/K-10 (Cs-DTP/K-10) as solid catalyst and its comparison with other catalysts in a batch reactor. Mono-Benzyl glycerol ether (MBGE) was the major product formed in the reaction along with formation of di-benzyl glycerol ether (DBGE). The effects of different parameters were studied to optimize the reaction parameters. This work provides an insight into characterization of Cs2.5H0.5PW12O40/K-10 catalyst by advanced techniques such as surface area measurement, X-ray analysis, ICP-MS, FT-IR, and SEM. Reaction products were characterized and confirmed by using the GCMS method. The kinetic model was developed from an insight into the reaction mechanism. The apparent energy of activation was found to be 18.84 kcal/mol.


RSC Advances ◽  
2020 ◽  
Vol 10 (45) ◽  
pp. 27183-27193
Author(s):  
Rose Fadzilah Abdullah ◽  
Umer Rashid ◽  
Yun Hin Taufiq-Yap ◽  
Mohd Lokman Ibrahim ◽  
Chawalit Ngamcharussrivichai ◽  
...  

The potential of bifunctional nanocatalysts obtained from waste palm kernel shell (PKS) was investigated for one-step transesterification–esterification under mild conditions.


ChemInform ◽  
2011 ◽  
Vol 42 (47) ◽  
pp. no-no
Author(s):  
Nazim Uddin ◽  
Joseph S. Ulicki ◽  
F. Holger Foersterling ◽  
M. Mahmun Hossain
Keyword(s):  
One Step ◽  

Sign in / Sign up

Export Citation Format

Share Document