Anaerobic treatment of wastewater from a fish-canning factory in a full-scale upflow anaerobic sludge blanket (UASB) reactor

1999 ◽  
Vol 40 (8) ◽  
Keyword(s):  
Anaerobic Treatment ◽  
Full Scale ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Anaerobic Sludge Blanket

Anaerobic treatment of Wastewater from a fish-canning factory in a full-scale Upflow Anaerobic Sludge Blanket (UASB) reactor

1999 ◽  
Vol 40 (8) ◽  
pp. 57-62 ◽  
Author(s):  
A. Pun˜al ◽  
J. M. Lema
Keyword(s):  
Anaerobic Treatment ◽  
Upflow Anaerobic Sludge Blanket ◽  
Total Alkalinity ◽  
Uasb Reactor ◽  
Organic Loading Rate ◽  
Anaerobic Sludge ◽  
Stable Operation ◽  
Start Up ◽  
Upward Velocity ◽  
Anaerobic Sludge Blanket

The start-up and optimisation of a 380 m3 UASB reactor (Up-flow Anaerobic Sludge Blanket) treating wastewater from a fish-canning factory was carried out. At the beginning of the operation the Organic Loading Rate (OLR) was 1 kg COD/m3·d. Then, the load was gradually increased in steps of 50% OLR until the final capacity of the system (4 kg COD/m3·d) was achieved. Wastewater characteristics were highly dependent on the canned product (mussel, tuna, sardines, etc.). In spite of that, a stable operation working at a hydraulic retention time (HRT) of 2 days was maintained. Total Alkalinity (TA) always presented values higher than 3 g CaCO3/l, while the IA/TA ratio (Intermediate Alalinity/Total Alkalinity) was always maintained lower than 0.3. In order to improve granulation conditions, upward velocities from 0.5 to 0.8 m/h were applied. The highest values caused the washout of non-granulated biomass from the reactor, optimum operation being achieved at an upward velocity of 0.7 m/h.

Bicarbonate dosing: a tool to performance recovery of a thermophilic methanol-fed UASB reactor

2003 ◽  
Vol 48 (6) ◽  
pp. 95-101 ◽  
Author(s):  
P.L. Paulo ◽  
J.B. van Lier ◽  
G. Lettinga
Keyword(s):  
Anaerobic Treatment ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Recovery Strategy ◽  
Batch Mode ◽  
Performance Recovery ◽  
Complete Failure ◽  
Ph Shock ◽  
Anaerobic Sludge Blanket

The thermophilic-anaerobic treatment of methanol-containing wastewater in an upflow anaerobic sludge blanket (UASB) reactor, was found to be quite sensitive to pH shocks, both acid and alkaline. The results of the recovery experiments of sludge exposed to an alkaline shock, indicated that the addition or deprivation of sodium bicarbonate (NaHCO3) in the medium, plays an important role in the competition of methanogens and (homo)acetogens for methanol. In addition, caution has to be taken when using NaHCO3 for buffering methanol-containing wastewaters, since its introduction in the system will favour (homo)acetogenesis when proper conditions are not established. Based on these results, a recovery strategy for methanogenesis was proposed where bicarbonate is supplied stepwise, and the reactor is operated in a batch mode. This strategy was found to be appropriate, i.e. the results revealed that the recovery of methanogenesis on methanol from a reactor upset or complete failure caused by pH shock is possible, even in systems where (homo)acetogens are outcompeting methanogens. The time and the number of feedings required will depend on the degree of deterioration of the sludge.

Upgrading of existing aerobic plants with the LUCAS anaerobic system based on full-scale experiences

2005 ◽  
Vol 52 (4) ◽  
pp. 39-46 ◽  
Author(s):  
R. Gerards ◽  
W. Gils ◽  
L. Vriens
Keyword(s):  
Full Scale ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Organic Loading Rate ◽  
Anaerobic Sludge ◽  
Aerobic Treatment ◽  
Treatment Efficiency ◽  
Nitrogen And Phosphorus ◽  
Anaerobic Sludge Blanket ◽  
Sludge Production

It has been demonstrated that the combination of anaerobic–aerobic treatment is the best technological and economical solution for the treatment of high loaded wastewater. Where in the past aerobic treatment systems were still very acceptable due to the very good treatment efficiency, simplicity and robustness of the technology, this has, in most cases, been changed due to very stringent sludge disposal legislation. The anaerobic pretreatment takes care of approximately 80–90% of the overall treatment efficiency at high loading rates and low sludge production and low energy costs. The aerobic posttreatment takes care of the absolute high removal efficiency and nitrogen and phosphorus removal. Because of the low organic loading rate of the aerobic posttreatment also in this stage the sludge production is low. The combination of anaerobic–aerobic treatment results in a compact system capable of reaching high treatment efficiency at low sludge production and lower energy consumption. Waterleau Global Water Technology has developed LUCAS® anaerobic–aerobic system that combines an Upflow Anaerobic Sludge Blanket (UASB) reactor with an aerobic, constant-level cyclic activated sludge system, which is very suitable for the treatment of high loaded wastewaters in general and brewery waste water in particular. It has been proven from several full scale upgrading projects that the UASB system is best suitable for implementation in the aerobic plants that have to be extended in capacity.

scholarly journals Treatment of canned fish factory wastewater by upflow anaerobic sludge blanket (uasb) reactors

2015 ◽  
Vol 5 (1) ◽  
pp. 158
Author(s):  
Farshad Golbabaei Kootenaei ◽  
Gholamreza Darvishi ◽  
Mohammad Javad Bayani
Keyword(s):  
Removal Rate ◽  
Anaerobic Treatment ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Organic Loading Rate ◽  
Anaerobic Sludge ◽  
Canned Fish ◽  
Cod Removal Rate ◽  
Aeration Process ◽  
Anaerobic Sludge Blanket

<p>Application of UASB method for wastewater treatment of canned fish factory reduces the costs of pre-treatments processes such as neutralization, and also reduced the costs of final aeration process. In this study, an UASB reactor which was equipped with a 3-phase separator system has been used. At first, a complex of anaerobic digester sludge and return sludge of activated sludge was added to reactor with ratio of 25 to 15. Then, the wastewater of factory entered into the reactor with inlet Organic Loading Rate (OLR) of 0.5 kg/m3.day which was increased gradually up to 4 kg/m3.day. Then, sampling was done for various tests during 75 days. The results of this study showed that UASB method neutralized and reduced the pH of the inlet wastewater from 10.5 to 7.3; and also reduced the SS of the inlet wastewater from 43 gr/l to 8 gr/l. the COD removal rate of this method was around 87%.</p><p>Keywords: canned fish wastewater, anaerobic treatment, UASB, COD, OLR.</p>

Inhibition of methanogenic activity of starch-degrading granules by aromatic pollutants

1997 ◽  
Vol 35 (8) ◽  
pp. 247-253 ◽  
Author(s):  
Herbert H. P. Fang ◽  
Ivan W. C. Lau ◽  
Denis W. C. Chung
Keyword(s):  
Chemical Industry ◽  
Functional Group ◽  
Anaerobic Treatment ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Aromatic Pollutants ◽  
Methanogenic Activity ◽  
Phenolic Pollutants ◽  
Ic50 Values

The effects of nine common aromatic pollutants from chemical industry on the bioactivity of anaerobic granules were examined. The granules were obtained from an upflow anaerobic sludge blanket (UASB) reactor treating wastewater containing colloidal starch. The specific methanogenic activities (SMA) of granules were measured at 37°C in serum vials using 3000 mg/l of colloidal starch as substrate, plus individual pollutants at various concentrations. The toxicity was expressed by the IR50 and IC50 values, i.e. the toxicant/biomass ratio and concentration at which levels the granules exhibited only 50% of their original bioactivities. Results showed that in general the granules exhibited mild resistance to toxicity of aromatic pollutants, probably due to the granules' layered microstructure. The toxicities, which were dependent on the nature of chemical functional group, of the aromatic pollutants were in the following descending order: cresols &gt; phenol &gt; hydroxyphenols/phthalate &gt; benzoate. There was only marginal difference between the toxicity of the steric isomers. For the seven phenolic pollutants, the more hydrophobic the functional group the higher the toxicity. The granules' resistance to toxicity suggested the plausibility of anaerobic treatment of wastewater from the chemical industry.

scholarly journals Microbial Removal of Pb(II) Using an Upflow Anaerobic Sludge Blanket (UASB) Reactor

Catalysts ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 512
Author(s):  
Jeremiah Chimhundi ◽  
Carla Hörstmann ◽  
Evans M. N. Chirwa ◽  
Hendrik G. Brink
Keyword(s):  
Treatment Process ◽  
Removal Rate ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Reduction Potentials ◽  
Oxidation Reduction ◽  
Anaerobic Sludge Blanket ◽  
Microbial Removal ◽  
Maximum Removal

The main objective of this study was to achieve the continuous biorecovery and bioreduction of Pb(II) using an industrially obtained consortia as a biocatalyst. An upflow anaerobic sludge blanket reactor was used in the treatment process. The bioremediation technique that was applied made use of a yeast extract as the microbial substrate and Pb(NO3)2 as the source of Pb(II). The UASB reactor exhibited removal efficiencies of between 90 and 100% for the inlet Pb concentrations from 80 to 2000 ppm and a maximum removal rate of 1948.4 mg/(L·d) was measured. XRD and XPS analyses of the precipitate revealed the presence of Pb0, PbO, PbS and PbSO4. Supporting experimental work carried out included growth measurements, pH, oxidation–reduction potentials and nitrate levels.

KINETIC MODELS FOR PREDICTION OF COD EFFLUENT FROM UPFLOW ANAEROBIC SLUDGE BLANKET (UASB) REACTOR FOR CANNERY SEAFOOD WASTEWATER TREATMENT

2016 ◽  
Vol 78 (5-6) ◽  
Author(s):  
Sunwanee Jijai ◽  
Chairat Siripatana ◽  
Sompong O-Thong ◽  
Norli Ismail
Keyword(s):  
Palm Oil ◽  
Kinetic Models ◽  
Second Order ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Substrate Removal ◽  
Reactor Kinetic ◽  
Palm Oil Mill ◽  
Anaerobic Sludge Blanket

The three identical lab-scale upflow anaerobic sludge blanket (UASB) reactors were operated continuously for treating cannery seafood wastewater at seven hydraulic retention times (HRTs) of 5, 4, 3, 2, 1, 0.5 and 0.25 days. The different of granule sizes from three sources: a cassava factory (CS), a seafood factory (SS), and a palm oil mill (PS), average sizes in the range 1.5-1.7, 0.7-1.0 and 0.1-0.2 mm respectively were used as inocula for anaerobic digestion. The UASB-R1 used only granules from seafood factory (R1-SS), the UASB-R2 used mixed granules from seafood with cassava factory (R2-SS+CS) and the UASB-R3 used mixed granules from seafood factory with palm oil mill (R3-SS+PS). In this study selected mathematical models including Monod, Contois, Grau second-order and modified Stover-Kicannon kinetic models were applied to determine the substrate removal kinetics of UASB reactor. Kinetic parameters were determined through linear regression using experimental data obtained from the steady-state experiment and subsequently used to predict effluent COD. The results showed that Grau second-order and modified Stover-Kicannon kinetic models were more suitable than that of others for predicting the effluent COD, with high the correlation coefficient (R2). In addition, the UASB-R2 from mixed granules with cassava factory (SS+CS) gave the best performance and highest coefficient value.

Sign in / Sign up

Export Citation Format

Share Document