A soft X-ray beamline for surface chemistry at the Photon Factory

2002 ◽  
Vol 124 (2-3) ◽  
pp. 151-164 ◽  
Author(s):  
Kenta Amemiya ◽  
Hiroshi Kondoh ◽  
Toshihiko Yokoyama ◽  
Toshiaki Ohta
1983 ◽  
Vol 208 (1-3) ◽  
pp. 471-477 ◽  
Author(s):  
Yoshiyuki Amemiya ◽  
Katsuzo Wakabayashi ◽  
Toshiaki Hamanaka ◽  
Takeyuki Wakabayashi ◽  
Tadashi Matsushita ◽  
...  

2014 ◽  
Vol 70 (a1) ◽  
pp. C500-C500
Author(s):  
Yusuke Yamada ◽  
Naohiro Matsugaki ◽  
Masahiko Hiraki ◽  
Ryuichi Kato ◽  
Toshiya Senda

Crystallization trial is one of the most important but time-consuming steps in macromolecular crystallography. Once a crystal appears in a certain crystallization condition, the crystal is typically harvested from the crystallization drop, soaked into a cryoprotection buffer, flash-cooled with a liquid nitrogen or cold gas flow and finally evaluated its diffraction quality by an X-ray beam. During these long process, crystal may be damaged and the result from the diffraction experiment does not necessarily reflect a nature of the crystal. On in-situ diffraction experiment, where a crystal in a crystallization drop is directly irradiated to an X-ray beam, a diffraction image from a crystal without any external factors such as harvesting and cryoprotection and, as a result, a nature of crystal can be evaluated quickly. In the Photon Factory, a new table-top diffractometer for in-situ diffraction experiments has been developed. It consists of XYZ translation stages with a plate handler, on-axis viewing system with a large numeric aperture and a plate rack where ten crystallization plates can be placed. These components sit on a common plate and it is placed on the existing diffractometer table in the beamline endstation. The CCD detector with a large active area and a pixel array detector with a small active area are used for acquiring diffraction images from crystals. Dedicated control software and user interface were also developed. Since 2014, user operation of the new diffractometer was started and in-situ diffraction experiments were mainly performed for evaluations of crystallization plates from a large crystallization screening project in our facility. BL-17A [1], one of micro-focus beamlines at the Photon Factory, is planned to be upgraded in March 2015. With this upgrade, a new diffractometer, which has a capability to handle a crystallization plate, will be installed so that diffraction data sets from crystals in crystallization drop can be collected.


2004 ◽  
Vol 25 (1) ◽  
pp. 141-149 ◽  
Author(s):  
Daniel A. Fischer ◽  
Kirill Efimenko ◽  
Rajendra R. Bhat ◽  
Sharadha Sambasivan ◽  
Jan Genzer

Processes ◽  
2019 ◽  
Vol 7 (3) ◽  
pp. 167 ◽  
Author(s):  
Bo Huang ◽  
Guowei Liu ◽  
Penghui Wang ◽  
Xiang Zhao ◽  
Hongxiang Xu

The objective of this research was to explore the changes of the pore structure and surface properties of nitric-modified lignite and base the adsorption performance on physical and chemical adsorbent characteristics. To systematically evaluate pore structure and surface chemistry effects, several lignite samples were treated with different concentrations of nitric acid in order to get different pore structure and surface chemistry adsorbent levels. A common heavy metal ion contaminant in water, Pb2+, served as an adsorbate probe to demonstrate the change of modified lignite adsorption properties. The pore structure and surface properties of lignite samples before and after modification were characterized by static nitrogen adsorption, X-ray diffraction, Scanning electron microscope, Fourier transform infrared spectroscopy, zeta potential, and X-ray photoelectron spectroscopy. The experimental results showed that nitric acid modification can increase the ability of lignite to adsorb Pb2+. The adsorption amount of Pb2+ increased from 14.45 mg·g−1 to 30.68 mg·g−1. Nitric acid reacted with inorganic mineral impurities such as iron dolomite in lignite and organic components in coal, which caused an increase in pore size and a decrease in specific surface areas. A hydrophilic adsorbent surface more effectively removed Pb2+ from aqueous solution. Nitric acid treatment increased the content of polar oxygen-containing functional groups such as hydroxyl, carbonyl, and carboxyl groups on the surface of lignite. Treatment introduced nitro groups, which enhanced the negative electrical properties, the polarity of the lignite surface, and its metal ion adsorption performance, a result that can be explained by enhanced water adsorption on hydrophilic surfaces.


Sign in / Sign up

Export Citation Format

Share Document