scholarly journals Morphological evolution of microscopic dewetting droplets with slip

2017 ◽  
Vol 828 ◽  
pp. 271-288 ◽  
Author(s):  
Tak Shing Chan ◽  
Joshua D. McGraw ◽  
Thomas Salez ◽  
Ralf Seemann ◽  
Martin Brinkmann
Keyword(s):  
Slip Length ◽  
Morphological Evolution ◽  
Early Time ◽  
Slip Boundary Condition ◽  
Similarity Solutions ◽  
Contact Angles ◽  
Equilibrium Contact Angle ◽  
Navier Slip ◽  
Slip Boundary ◽  
Quasistatic Regime

We investigate the dewetting of a droplet on a smooth horizontal solid surface for different slip lengths and equilibrium contact angles. Specifically, we solve for the axisymmetric Stokes flow using the boundary element method with (i) the Navier-slip boundary condition at the solid/liquid boundary and (ii) a time-independent equilibrium contact angle at the contact line. When decreasing the rescaled slip length $\tilde{b}$ with respect to the initial central height of the droplet, the typical non-sphericity of a droplet first increases, reaches a maximum at a characteristic rescaled slip length $\tilde{b}_{m}\approx O(0.1{-}1)$ and then decreases. Regarding different equilibrium contact angles, two universal rescalings are proposed to describe the behaviour of the non-sphericity for rescaled slip lengths larger or smaller than $\tilde{b}_{m}$. Around $\tilde{b}_{m}$, the early time evolution of the profiles at the rim can be described by similarity solutions. The results are explained in terms of the structure of the flow field governed by different dissipation channels: elongational flows for $\tilde{b}\gg \tilde{b}_{m}$, friction at the substrate for $\tilde{b}\approx \tilde{b}_{m}$ and shear flows for $\tilde{b}\ll \tilde{b}_{m}$. Following the changes between these dominant dissipation mechanisms, our study indicates a crossover to the quasistatic regime when $\tilde{b}$ is many orders of magnitude smaller than $\tilde{b}_{m}$.

Examination of the Slip Boundary Condition by µ-PIV and Lattice Boltzmann Simulations

2002 ◽  
Author(s):  
Derek C. Tretheway ◽  
Luoding Zhu ◽  
Linda Petzold ◽  
Carl D. Meinhart
Keyword(s):  
Boundary Condition ◽  
Shear Rate ◽  
Channel Flow ◽  
Lattice Boltzmann ◽  
Slip Velocity ◽  
Slip Length ◽  
Slip Boundary Condition ◽  
Slip Boundary ◽  
Lattice Boltzmann Simulations ◽  
Bounce Back

This work examines the slip boundary condition by Lattice Boltzmann simulations, addresses the validity of the Navier’s hypothesis that the slip velocity is proportional to the shear rate and compares the Lattice Boltzmann simulations to the experimental results of Tretheway and Meinhart (Phys. of Fluids, 14, L9–L12). The numerical simulation models the boundary condition as the probability, P, of a particle to bounce-back relative to the probability of specular reflection, 1−P. For channel flow, the numerically calculated velocity profiles are consistent with the experimental profiles for both the no-slip and slip cases. No-slip is obtained for a probability of 100% bounce-back, while a probability of 0.03 is required to generate a slip length and slip velocity consistent with the experimental results of Tretheway and Meinhart for a hydrophobic surface. The simulations indicate that for microchannel flow the slip length is nearly constant along the channel walls, while the slip velocity varies with wall position as a results of variations in shear rate. Thus, the resulting velocity profile in a channel flow is more complex than a simple combination of the no-slip solution and slip velocity as is the case for flow between two infinite parallel plates.

Liquid Slippage in Confined Flows: Effect of Periodic Micropatterns of Arbitrary Pitch and Amplitude

2016 ◽  
Author(s):  
Avinash Kumar ◽  
Subhra Datta ◽  
Dinesh Kalyanasundaram
Keyword(s):  
Slip Length ◽  
Fluid Dynamic ◽  
Low Cost ◽  
Slip Boundary Condition ◽  
Friction Reduction ◽  
Fourier Decomposition ◽  
Slip Boundary ◽  
Local Degree ◽  
Effective Slip Length ◽  
Effective Slip

The recently confirmed violation of the no-slip boundary condition in the flow of small-molecule liquids through microchannels and nanochannels has technological implications such as friction reduction. However, for significant friction reduction at low cost, the microchannel wall needs to be chemically inhomogeneous. The direct fluid dynamic consequence of this requirement is a spatial variation in the local degree of liquid slippage. In this work, the pressure-driven flow in a channel with periodically patterned slippage on the channel walls is studied using a spectrally accurate semi-analytical approach based on Fourier decomposition. The method puts no restrictions on the pitch (or wavelength) and amplitude of the pattern. The predicted effective slip length in the limits of small pattern amplitude and thick channels is found to be consistent with previously published results. The effective degree of slippage decreases with the patterning amplitude. Finer microchannels and longer pattern wavelengths promote slippage.

Numerical Simulation of Newtonian Fluid Flow in a T-Channel with no Slip/Slip Boundary Conditions on a Solid Wall

2017 ◽  
Vol 743 ◽  
pp. 480-485
Author(s):  
Evgeny Borzenko ◽  
Olga Dyakova
Keyword(s):  
Boundary Condition ◽  
Fluid Flow ◽  
Solid Wall ◽  
Simple Procedure ◽  
Slip Boundary Condition ◽  
Navier Slip ◽  
Slip Boundary ◽  
Pressure Profiles ◽  
Slip Yield Stress ◽  
Solid Walls

The planar flow of a Newtonian incompressible fluid in a T-shaped channel is investigated. Three fluid interaction models with solid walls are considered: no slip boundary condition, Navier slip boundary condition and slip boundary condition with slip yield stress. The fluid flow is provided by uniform pressure profiles at the boundary sections of the channel. The problem is numerically solved using a finite difference method based on the SIMPLE procedure. Characteristic flow regimes have been found for the described models of liquid interaction with solid walls. The estimation of the influence of the Reynolds number, pressure applied to the boundary sections and the parameters of these models on the flow pattern was performed. The criterial dependences describing main characteristics of the flow under conditions of the present work have been demonstrated.

A New Partial Slip Boundary Condition for the Lattice-Boltzmann Method

2013 ◽  
Author(s):  
Marc-Florian Uth ◽  
Alf Crüger ◽  
Heinz Herwig
Keyword(s):  
Boundary Condition ◽  
Lattice Boltzmann ◽  
Stokes Equations ◽  
Slip Boundary Condition ◽  
Navier Stokes ◽  
Slip Model ◽  
Navier Stokes Equations ◽  
Navier Slip ◽  
Slip Boundary ◽  
Boltzmann Method

In micro or nano flows a slip boundary condition is often needed to account for the special flow situation that occurs at this level of refinement. A common model used in the Finite Volume Method (FVM) is the Navier-Slip model which is based on the velocity gradient at the wall. It can be implemented very easily for a Navier-Stokes (NS) Solver. Instead of directly solving the Navier-Stokes equations, the Lattice-Boltzmann method (LBM) models the fluid on a particle basis. It models the streaming and interaction of particles statistically. The pressure and the velocity can be calculated at every time step from the current particle distribution functions. The resulting fields are solutions of the Navier-Stokes equations. Boundary conditions in LBM always not only have to define values for the macroscopic variables but also for the particle distribution function. Therefore a slip model cannot be implemented in the same way as in a FVM-NS solver. An additional problem is the structure of the grid. Curved boundaries or boundaries that are non-parallel to the grid have to be approximated by a stair-like step profile. While this is no problem for no-slip boundaries, any other velocity boundary condition such as a slip condition is difficult to implement. In this paper we will present two different implementations of slip boundary conditions for the Lattice-Boltzmann approach. One will be an implementation that takes advantage of the microscopic nature of the method as it works on a particle basis. The other one is based on the Navier-Slip model. We will compare their applicability for different amounts of slip and different shapes of walls relative to the numerical grid. We will also show what limits the slip rate and give an outlook of how this can be avoided.

scholarly journals Sharp-interface limits of a phase-field model with a generalized Navier slip boundary condition for moving contact lines

2018 ◽  
Vol 849 ◽  
pp. 805-833 ◽  
Author(s):  
Xianmin Xu ◽  
Yana Di ◽  
Haijun Yu
Keyword(s):  
Boundary Condition ◽  
Phase Field ◽  
Field Model ◽  
Phase Field Model ◽  
Slip Boundary Condition ◽  
Sharp Interface ◽  
Navier Slip ◽  
Slip Boundary ◽  
Moving Contact ◽  
Moving Contact Lines

The sharp-interface limits of a phase-field model with a generalized Navier slip boundary condition for binary fluids with moving contact lines are studied by asymptotic analysis and numerical simulations. The effects of the mobility number as well as a phenomenological relaxation parameter on the boundary condition are considered. In asymptotic analysis, we consider both the cases that the mobility number is proportional to the Cahn number and the square of the Cahn number, and derive the sharp-interface limits for several set-ups of the boundary relaxation parameter. It is shown that the sharp-interface limit of the phase-field model is the standard two-phase incompressible Navier–Stokes equations coupled with several different slip boundary conditions. Numerical results are consistent with the analysis results and also illustrate the different convergence rates of the sharp-interface limits for different scalings of the two parameters.

On the Slip Mechanism of Microfluidics by Means of a Mean-Field Free-Energy Lattice Boltzmann Method

2005 ◽  
Author(s):  
Junfeng Zhang ◽  
Daniel Y. Kwok
Keyword(s):  
Free Energy ◽  
Lattice Boltzmann ◽  
Slip Length ◽  
Mean Field ◽  
Interaction Strength ◽  
Slip Boundary Condition ◽  
System Size ◽  
Slip Mechanism ◽  
Slip Boundary ◽  
Fluid Solid Interaction

In this paper, we studied liquid-solid slip by employing a mean-field free-energy lattice Boltzmann approach recently proposed [Zhang et al., Phy. Rev. E. 69, 032602, 2004]. With a general bounce-back no-slip boundary condition applied to the interface, liquid slip was observed because of the specific fluid-solid interaction. The slip length is clearly related to the interaction strength: the stronger the interaction, the less hydrophobic the surface and hence results in less slipping. Unlike other lattice Boltzmann models, a contact angle value between 0–180° can be generated here without using a less realistic repulsive fluid-solid interaction. We found that system size does not affect the absolute slip magnitude; however, the ratio of the slip length to system size increases quickly as the system becomes smaller, illustrating that slip becomes important in smaller-scale systems. A small negative slip length can also be produced with a strong fluid-solid attraction. These results are in qualitative agreement with those from experimental and molecular dynamics studies.

Numerical investigation of flow around a structure using Navier-slip boundary conditions

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Sang-Do Choi ◽  
Tae-Soo Eum ◽  
Eun Taek Shin ◽  
Chang Geun Song
Keyword(s):  
Boundary Conditions ◽  
Slip Length ◽  
Lift Coefficient ◽  
Vortex Formation ◽  
Slip Condition ◽  
Partial Slip ◽  
Slip Boundary Conditions ◽  
Content Type ◽  
Navier Slip ◽  
Slip Boundary

Purpose Complicated motion of vortex is frequently observed in the wake of islands. These kinds of swirling fluid cause the trap of sediments or pollutants, subsequently inducing the dead zone, odor or poor water quality. Therefore, the understanding of flow past a circular cylinder is significant in predicting water quality and positioning the immersed structures. This study aims to investigate the flow properties around a structure using Navier-slip boundary conditions. Design/methodology/approach Boundary conditions are a major factor affecting the flow pattern because the magnitude of flow detachment on a surface can redistribute the tangential stress on the wall. Therefore, the authors performed an analysis of laminar flow passing through a circular structure to investigate the effect of boundary conditions on the flow pattern. Findings The authors examined the relationship between the partial-slip boundary conditions and the flow behavior at low Reynolds number past a circular cylinder considering velocity and vorticity distributions behind the cylinder, lift coefficient and Strouhal number. The amplitude of lift coefficient by the partial slip condition had relatively small value compared with that of no-slip condition, as the wall shear stress acting on the cylinder became smaller by the velocity along the cylinder surface. The frequency of the asymmetrical vortex formation with partial slip velocity was increased compared with no-slip case due to the intrinsic inertial effect of Navier-slip condition. Originality/value The ability to engineer slip could have dramatic influences on flow, as the viscous dominated motion can lead to large pressure drops and large axial dispersion. By the slip length control, no-slip, partial-slip and free-slip boundary conditions are tunable, and the velocity distributions at the wall, vortex formation and wake pattern including the amplitude of lift coefficient and frequency were significantly affected by slip length parameter.

Slip over rough and coated surfaces

1994 ◽  
Vol 273 ◽  
pp. 125-139 ◽  
Author(s):  
Michael J. Miksis ◽  
Stephen H. Davis
Keyword(s):  
Slip Boundary Condition ◽  
Slip Condition ◽  
Slip Coefficient ◽  
Outer Flow ◽  
Navier Slip ◽  
Two Fluids ◽  
Slip Boundary ◽  
Lubricating Film ◽  
Effective Slip ◽  
Coated Surfaces

We study the effect of surface roughness and coatings on fluid flow over a solid surface. In the limit of small-amplitude roughness and thin lubricating films we are able to derive asymptotically an effective slip boundary condition to replace the no-slip condition over the surface. When the film is absent, the result is a Navier slip condition in which the slip coefficient equals the average amplitude of the roughness. When a layer of a second fluid covers the surface and acts as a lubricating film, the slip coefficient contains a term which is proportional to the viscosity ratio of the two fluids and which depends on the dynamic interaction between the film and the fluid. Limiting cases are identified in which the film dynamics can be decoupled from the outer flow.

Sign in / Sign up

Export Citation Format

Share Document