scholarly journals Analysis of axisymmetric boundary layers

2018 ◽  
Vol 849 ◽  
pp. 927-941 ◽  
Author(s):  
Praveen Kumar ◽  
Krishnan Mahesh
Keyword(s):  
Boundary Layer ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Axial Flow ◽  
Streamwise Velocity ◽  
Skin Friction Coefficient ◽  
Radius Of Curvature ◽  
Normal Velocity ◽  
Displacement Thickness ◽  
Analytical Relations

Axisymmetric boundary layers are studied using integral analysis of the governing equations for axial flow over a circular cylinder. The analysis includes the effect of pressure gradient and focuses on the effect of transverse curvature on boundary layer parameters such as shape factor ($H$) and skin-friction coefficient ($C_{f}$), defined as $H=\unicode[STIX]{x1D6FF}^{\ast }/\unicode[STIX]{x1D703}$ and $C_{f}=\unicode[STIX]{x1D70F}_{w}/(0.5\unicode[STIX]{x1D70C}U_{e}^{2})$ respectively, where $\unicode[STIX]{x1D6FF}^{\ast }$ is displacement thickness, $\unicode[STIX]{x1D703}$ is momentum thickness, $\unicode[STIX]{x1D70F}_{w}$ is the shear stress at the wall, $\unicode[STIX]{x1D70C}$ is density and $U_{e}$ is the streamwise velocity at the edge of the boundary layer. Relations are obtained relating the mean wall-normal velocity at the edge of the boundary layer ($V_{e}$) and $C_{f}$ to the boundary layer and pressure gradient parameters. The analytical relations reduce to established results for planar boundary layers in the limit of infinite radius of curvature. The relations are used to obtain $C_{f}$ which shows good agreement with the data reported in the literature. The analytical results are used to discuss different flow regimes of axisymmetric boundary layers in the presence of pressure gradients.

On the scaling in sink-flow turbulent boundary layers

2013 ◽  
Vol 737 ◽  
pp. 329-348 ◽  
Author(s):  
Shivsai Ajit Dixit ◽  
O. N. Ramesh
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Physical Space ◽  
Streamwise Velocity ◽  
Turbulent Boundary Layers ◽  
Velocity Spectrum ◽  
Scaling Exponent ◽  
Order Of Magnitude

AbstractScaling of the streamwise velocity spectrum ${\phi }_{11} ({k}_{1} )$ in the so-called sink-flow turbulent boundary layer is investigated in this work. The present experiments show strong evidence for the ${ k}_{1}^{- 1} $ scaling i.e. ${\phi }_{11} ({k}_{1} )= {A}_{1} { U}_{\tau }^{2} { k}_{1}^{- 1} $, where ${k}_{1} $ is the streamwise wavenumber and ${U}_{\tau } $ is the friction velocity. Interestingly, this ${ k}_{1}^{- 1} $ scaling is observed much farther from the wall and at much lower flow Reynolds number (both differing by almost an order of magnitude) than what the expectations from experiments on a zero-pressure-gradient turbulent boundary layer flow would suggest. Furthermore, the coefficient ${A}_{1} $ in the present sink-flow data is seen to be non-universal, i.e. ${A}_{1} $ varies with height from the wall; the scaling exponent −1 remains universal. Logarithmic variation of the so-called longitudinal structure function, which is the physical-space counterpart of spectral ${ k}_{1}^{- 1} $ scaling, is also seen to be non-universal, consistent with the non-universality of ${A}_{1} $. These observations are to be contrasted with the universal value of ${A}_{1} $ (along with the universal scaling exponent of −1) reported in the literature on zero-pressure-gradient turbulent boundary layers. Theoretical arguments based on dimensional analysis indicate that the presence of a streamwise pressure gradient in sink-flow turbulent boundary layers makes the coefficient ${A}_{1} $ non-universal while leaving the scaling exponent −1 unaffected. This effect of the pressure gradient on the streamwise spectra, as discussed in the present study (experiments as well as theory), is consistent with other recent studies in the literature that are focused on the structural aspects of turbulent boundary layer flows in pressure gradients (Harun et al., J. Fluid Mech., vol. 715, 2013, pp. 477–498); the present paper establishes the link between these two. The variability of ${A}_{1} $ accommodated in the present framework serves to clarify the ideas of universality of the ${ k}_{1}^{- 1} $ scaling.

History effects and near equilibrium in adverse-pressure-gradient turbulent boundary layers

2017 ◽  
Vol 820 ◽  
pp. 667-692 ◽  
Author(s):  
A. Bobke ◽  
R. Vinuesa ◽  
R. Örlü ◽  
P. Schlatter
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Adverse Pressure Gradient ◽  
Turbulent Boundary Layers ◽  
Mean Velocity ◽  
History Effects ◽  
Displacement Thickness ◽  
Gradient Parameter

Turbulent boundary layers under adverse pressure gradients are studied using well-resolved large-eddy simulations (LES) with the goal of assessing the influence of the streamwise pressure-gradient development. Near-equilibrium boundary layers were characterized through the Clauser pressure-gradient parameter $\unicode[STIX]{x1D6FD}$. In order to fulfil the near-equilibrium conditions, the free stream velocity was prescribed such that it followed a power-law distribution. The turbulence statistics pertaining to cases with a constant value of $\unicode[STIX]{x1D6FD}$ (extending up to approximately 40 boundary-layer thicknesses) were compared with cases with non-constant $\unicode[STIX]{x1D6FD}$ distributions at matched values of $\unicode[STIX]{x1D6FD}$ and friction Reynolds number $Re_{\unicode[STIX]{x1D70F}}$. An additional case at matched Reynolds number based on displacement thickness $Re_{\unicode[STIX]{x1D6FF}^{\ast }}$ was also considered. It was noticed that non-constant $\unicode[STIX]{x1D6FD}$ cases appear to approach the conditions of equivalent constant $\unicode[STIX]{x1D6FD}$ cases after long streamwise distances (approximately 7 boundary-layer thicknesses). The relevance of the constant $\unicode[STIX]{x1D6FD}$ cases lies in the fact that they define a ‘canonical’ state of the boundary layer, uniquely characterized by $\unicode[STIX]{x1D6FD}$ and $Re$. The investigations on the flat plate were extended to the flow around a wing section overlapping in terms of $\unicode[STIX]{x1D6FD}$ and $Re$. Comparisons with the flat-plate cases at matched values of $\unicode[STIX]{x1D6FD}$ and $Re$ revealed that the different development history of the turbulent boundary layer on the wing section leads to a less pronounced wake in the mean velocity as well as a weaker second peak in the Reynolds stresses. This is due to the weaker accumulated effect of the $\unicode[STIX]{x1D6FD}$ history. Furthermore, a scaling law suggested by Kitsios et al. (Intl J. Heat Fluid Flow, vol. 61, 2016, pp. 129–136), proposing the edge velocity and the displacement thickness as scaling parameters, was tested on two constant-pressure-gradient parameter cases. The mean velocity and Reynolds-stress profiles were found to be dependent on the downstream development. The present work is the first step towards assessing history effects in adverse-pressure-gradient turbulent boundary layers and highlights the fact that the values of the Clauser pressure-gradient parameter and the Reynolds number are not sufficient to characterize the state of the boundary layer.

Stability of a Laminar Boundary Layer Flowing Along a Concave Surface

1989 ◽  
Vol 111 (4) ◽  
pp. 376-386 ◽  
Author(s):  
M. V. Finnis ◽  
A. Brown
Keyword(s):  
Boundary Layer ◽  
Laminar Boundary Layer ◽  
Streamwise Velocity ◽  
Wave Number ◽  
Radius Of Curvature ◽  
Normal Velocity ◽  
Mean Flow ◽  
Boundary Layer Flows ◽  
The Stability ◽  
The Galerkin Method

Go¨rtler instability for incompressible laminar boundary-layer flows over constant curvature concave surfaces is considered. The full linearized disturbance equations are solved by the Galerkin method using Chebyshev polynomials to represent the disturbance functions. Stability curves relating Go¨rtler number, wave number, and vortex amplification for a Blasius mean flow are presented. The effect of streamwise pressure variation is investigated using the Falkner–Skan boundary-layer solutions for the mean flow. The importance of including the normal velocity terms for these flows is shown by their effect on the stability curves. The streamwise velocity distribution in the boundary layer on a 3-m radius of curvature plate was investigated experimentally. The results are compared with the stability curves and predicted disturbance functions.

scholarly journals Boundary Layers on Rough Compressor Blades

1972 ◽  
Author(s):  
K. Bammert ◽  
R. Milsch
Keyword(s):  
Boundary Layer ◽  
Friction Coefficient ◽  
Boundary Layers ◽  
Axial Flow ◽  
Experimental Results ◽  
Experimental Investigations ◽  
Compressor Blades ◽  
Turbulent Transition ◽  
Good Reproduction ◽  
Compressor Efficiency

Blades of axial flow compressors are often roughened by corrosion or erosion. There is only scant information about the influence of this roughening on the boundary layers of the blades and thereby on the compressor efficiency. To obtain detailed information for calculating the efficiency drop due to the roughness, experimental investigations with an enlarged cascade have been executed. The results enabled to develop new formulas for a modified friction coefficient in the laminar region and for the laminar-turbulent transition and the separation points of the boundary layer. Thus, together with the Truckenbrodt theory, it was possible, to get a good reproduction of the experimental results.

Pressure gradient effects on the large-scale structure of turbulent boundary layers

2013 ◽  
Vol 715 ◽  
pp. 477-498 ◽  
Author(s):  
Zambri Harun ◽  
Jason P. Monty ◽  
Romain Mathis ◽  
Ivan Marusic
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Amplitude Modulation ◽  
Large Scale ◽  
Outer Region ◽  
Adverse Pressure Gradient ◽  
Turbulent Boundary Layers ◽  
Small Scale

AbstractResearch into high-Reynolds-number turbulent boundary layers in recent years has brought about a renewed interest in the larger-scale structures. It is now known that these structures emerge more prominently in the outer region not only due to increased Reynolds number (Metzger & Klewicki, Phys. Fluids, vol. 13(3), 2001, pp. 692–701; Hutchins & Marusic, J. Fluid Mech., vol. 579, 2007, pp. 1–28), but also when a boundary layer is exposed to an adverse pressure gradient (Bradshaw, J. Fluid Mech., vol. 29, 1967, pp. 625–645; Lee & Sung, J. Fluid Mech., vol. 639, 2009, pp. 101–131). The latter case has not received as much attention in the literature. As such, this work investigates the modification of the large-scale features of boundary layers subjected to zero, adverse and favourable pressure gradients. It is first shown that the mean velocities, turbulence intensities and turbulence production are significantly different in the outer region across the three cases. Spectral and scale decomposition analyses confirm that the large scales are more energized throughout the entire adverse pressure gradient boundary layer, especially in the outer region. Although more energetic, there is a similar spectral distribution of energy in the wake region, implying the geometrical structure of the outer layer remains universal in all cases. Comparisons are also made of the amplitude modulation of small scales by the large-scale motions for the three pressure gradient cases. The wall-normal location of the zero-crossing of small-scale amplitude modulation is found to increase with increasing pressure gradient, yet this location continues to coincide with the large-scale energetic peak wall-normal location (as has been observed in zero pressure gradient boundary layers). The amplitude modulation effect is found to increase as pressure gradient is increased from favourable to adverse.

Buoyancy effects on large-scale motions in convective atmospheric boundary layers: implications for modulation of near-wall processes

2018 ◽  
Vol 856 ◽  
pp. 135-168 ◽  
Author(s):  
S. T. Salesky ◽  
W. Anderson
Keyword(s):  
Boundary Layer ◽  
Velocity Field ◽  
Boundary Layers ◽  
Vertical Velocity ◽  
Amplitude Modulation ◽  
Large Scale ◽  
Streamwise Velocity ◽  
Small Scale ◽  
Convective Conditions ◽  
Wide Range

A number of recent studies have demonstrated the existence of so-called large- and very-large-scale motions (LSM, VLSM) that occur in the logarithmic region of inertia-dominated wall-bounded turbulent flows. These regions exhibit significant streamwise coherence, and have been shown to modulate the amplitude and frequency of small-scale inner-layer fluctuations in smooth-wall turbulent boundary layers. In contrast, the extent to which analogous modulation occurs in inertia-dominated flows subjected to convective thermal stratification (low Richardson number) and Coriolis forcing (low Rossby number), has not been considered. And yet, these parameter values encompass a wide range of important environmental flows. In this article, we present evidence of amplitude modulation (AM) phenomena in the unstably stratified (i.e. convective) atmospheric boundary layer, and link changes in AM to changes in the topology of coherent structures with increasing instability. We perform a suite of large eddy simulations spanning weakly ($-z_{i}/L=3.1$) to highly convective ($-z_{i}/L=1082$) conditions (where$-z_{i}/L$is the bulk stability parameter formed from the boundary-layer depth$z_{i}$and the Obukhov length $L$) to investigate how AM is affected by buoyancy. Results demonstrate that as unstable stratification increases, the inclination angle of surface layer structures (as determined from the two-point correlation of streamwise velocity) increases from$\unicode[STIX]{x1D6FE}\approx 15^{\circ }$for weakly convective conditions to nearly vertical for highly convective conditions. As$-z_{i}/L$increases, LSMs in the streamwise velocity field transition from long, linear updrafts (or horizontal convective rolls) to open cellular patterns, analogous to turbulent Rayleigh–Bénard convection. These changes in the instantaneous velocity field are accompanied by a shift in the outer peak in the streamwise and vertical velocity spectra to smaller dimensionless wavelengths until the energy is concentrated at a single peak. The decoupling procedure proposed by Mathiset al.(J. Fluid Mech., vol. 628, 2009a, pp. 311–337) is used to investigate the extent to which amplitude modulation of small-scale turbulence occurs due to large-scale streamwise and vertical velocity fluctuations. As the spatial attributes of flow structures change from streamwise to vertically dominated, modulation by the large-scale streamwise velocity decreases monotonically. However, the modulating influence of the large-scale vertical velocity remains significant across the stability range considered. We report, finally, that amplitude modulation correlations are insensitive to the computational mesh resolution for flows forced by shear, buoyancy and Coriolis accelerations.

scholarly journals Instability and Transition of a Boundary Layer over a Backward-Facing Step

Fluids ◽  
2022 ◽  
Vol 7 (1) ◽  
pp. 35
Author(s):  
Ming Teng ◽  
Ugo Piomelli
Keyword(s):  
Boundary Layer ◽  
Pressure Gradient ◽  
Velocity Distribution ◽  
Adverse Pressure Gradient ◽  
Transition Process ◽  
Transition To Turbulence ◽  
Recirculation Region ◽  
Backward Facing Step ◽  
Freestream Velocity ◽  
Displacement Thickness

The development of secondary instabilities in a boundary layer over a backward-facing step is investigated numerically. Two step heights are considered, h/δo*=0.5 and 1.0 (where δo* is the displacement thickness at the step location), in addition to a reference flat-plate case. A case with a realistic freestream-velocity distribution is also examined. A controlled K-type transition is initiated using a narrow ribbon upstream of the step, which generates small and monochromatic perturbations by periodic blowing and suction. A well-resolved direct numerical simulation is performed. The step height and the imposed freestream-velocity distribution exert a significant influence on the transition process. The results for the h/δo*=1.0 case exhibit a rapid transition primarily due to the Kelvin–Helmholtz instability downstream of step; non-linear interactions already occur within the recirculation region, and the initial symmetry and periodicity of the flow are lost by the middle stage of transition. In contrast, case h/δo*=0.5 presents a transition road map in which transition occurs far downstream of the step, and the flow remains spatially symmetric and temporally periodic until the late stage of transition. A realistic freestream-velocity distribution (which induces an adverse pressure gradient) advances the onset of transition to turbulence, but does not fundamentally modify the flow features observed in the zero-pressure gradient case. Considering the budgets of the perturbation kinetic energy, both the step and the induced pressure-gradient increase, rather than modify, the energy transfer.

scholarly journals Turbulence statistics in smooth wall oscillatory boundary layer flow

2018 ◽  
Vol 849 ◽  
pp. 192-230 ◽  
Author(s):  
Dominic A. van der A ◽  
Pietro Scandura ◽  
Tom O’Donoghue
Keyword(s):  
Boundary Layer ◽  
Normal Distribution ◽  
Boundary Layer Flow ◽  
Vertical Gradient ◽  
Streamwise Velocity ◽  
Normal Velocity ◽  
Half Cycle ◽  
Velocity Fluctuations ◽  
Oscillatory Boundary Layer ◽  
Layer Flow

Turbulence characteristics of an asymmetric oscillatory boundary layer flow are analysed through two-component laser-Doppler measurements carried out in a large oscillatory flow tunnel and direct numerical simulation (DNS). Five different Reynolds numbers, $R_{\unicode[STIX]{x1D6FF}}$, in the range 846–2057 have been investigated experimentally, where $R_{\unicode[STIX]{x1D6FF}}=\tilde{u} _{0max}\unicode[STIX]{x1D6FF}/\unicode[STIX]{x1D708}$ with $\tilde{u} _{0max}$ the maximum oscillatory velocity in the irrotational region, $\unicode[STIX]{x1D6FF}$ the Stokes length and $\unicode[STIX]{x1D708}$ the fluid kinematic viscosity. DNS has been carried out for the lowest three $R_{\unicode[STIX]{x1D6FF}}$ equal to 846, 1155 and 1475. Both experimental and numerical results show that the flow statistics increase during accelerating phases of the flow and especially at times of transition to turbulent flow. Once turbulence is fully developed, the near-wall statistics remain almost constant until the late half-cycle, with values close to those reported for steady wall-bounded flows. The higher-order statistics reach large values within a normalized wall distance of approximately $y/\unicode[STIX]{x1D6FF}=0.2$ at phases corresponding to the onset of low-speed streak breaking, because of the intermittency of the velocity fluctuations at these times. In particular, the flatness of the streamwise velocity fluctuations reaches values of the order of ten, while the flatness of the wall-normal velocity fluctuations reaches values of several hundreds. Far from the wall, at locations where the vertical gradient of the streamwise velocity is zero, the skewness is approximately zero and the flatness is approximately equal to 3, representative of a normal distribution. At lower elevations the distribution of the fluctuations deviate substantially from a normal distribution, but are found to be well described by other standard theoretical probability distributions.

Effect of Transverse Curvature on Turbulent-Boundary-Layer Characteristics

1958 ◽  
Vol 2 (04) ◽  
pp. 33-51
Author(s):  
Yun-Sheng Yu
Keyword(s):  
Boundary Layer ◽  
Circular Cylinder ◽  
Turbulent Boundary Layer ◽  
Velocity Profile ◽  
Pressure Gradient ◽  
Boundary Layer Thickness ◽  
Axial Flow ◽  
Shearing Stress ◽  
Transverse Curvature ◽  
Similarity Laws

Tests made on the turbulent boundary layer on a circular cylinder in axial flow at zero pressure gradient are described. From the measurements, similarity laws of the velocity profile are formulated, and various boundary-layer characteristics are evaluated and compared with the flatplate results. It is found that the effect of transverse curvature is to increase the surface shearing stress and to decrease the boundary-layer thickness, and that the latter variation is more pronounced than the former.

An Accurate Calculation Method for Two-dimensional Incompressible Laminar Boundary Layers, Including Cases with Regions of Sharp Pressure Gradient

1977 ◽  
Vol 28 (3) ◽  
pp. 149-162 ◽  
Author(s):  
N Curle
Keyword(s):  
Boundary Layer ◽  
Pressure Gradient ◽  
Calculation Method ◽  
Boundary Layer Separation ◽  
Pressure Gradients ◽  
Accurate Calculation ◽  
Boundary Layer Equations ◽  
Laminar Boundary Layers ◽  
Displacement Thickness ◽  
Type Boundary

SummaryThe paper develops and extends the calculation method of Stratford, for flows in which a Blasius type boundary layer reacts to a sharp unfavourable pressure gradient. Whereas even the more general of Stratford’s two formulae for predicting the position of boundary-layer separation is based primarily upon an interpolation between only three exact solutions of the boundary layer equations, the present proposals are based upon nine solutions covering a much wider range of conditions. Four of the solutions are for extremely sharp pressure gradients of the type studied by Stratford, and five are for more modest gradients. The method predicts the position of separation extremely accurately for each of these cases.The method may also be used to predict the detailed distributions of skin friction, displacement thickness and momentum thickness, and does so both simply and accurately.

Sign in / Sign up

Export Citation Format

Share Document