Anomalous stress field and active breaching at relay ramps: a field example from Gediz Graben, SW Turkey

2007 ◽  
Vol 144 (4) ◽  
pp. 687-699 ◽  
Author(s):  
N. BOZKURT ÇİFTÇİ ◽  
ERDİN BOZKURT
Keyword(s):  
Stress Field ◽  
Normal Fault ◽  
Local Stress ◽  
Boundary Structure ◽  
Spatial And Temporal Variation ◽  
Normal Faults ◽  
Structural Style ◽  
Sw Turkey ◽  
A Site ◽  
Local Stress Field

Relay ramps form at different scales in extensional terrains to accommodate the differential stretching among the overlapping bounding-normal fault segments. The major boundary structure of the Gediz Graben (SW Turkey) is segmented, with formation, evolution and active breaching of relay ramps. The Akçapınar relay ramp is an example of these processes that forms within a 2 km wide overlap zone between ∼ E–W-trending segments on the southern margin of the Gediz Graben. Change of structural style at the ramp area is clearly evident from variations in the orientation of fractures and faults of the relay ramp. As a site of local stress field anomaly, ∼ N–S-trending structures in the Akçapınar relay ramp are conformable with the extension that is parallel to the bounding faults of the relay ramp. These structures are also superimposed onto the ∼ E–W-trending regional structural style by an obvious cross-cutting relationship, suggesting both spatial and temporal variation of the state of stress at the ramp area during the relay ramp formation. The regional stress field and the resulting regional structural style characterize the earlier stages of ramp evolution, during which segment interaction is limited. As segment interaction and relay ramp formation advances towards the breaching phase, an anomalous local stress field arises and the relay ramp area experiences extension parallel to the bounding normal faults, that is, transverse to the regional direction of extension. This creates a new structural style at the ramp area.

scholarly journals Activation of optimally and unfavourably oriented faults in a uniform local stress field during the 2011 Prague, Oklahoma, sequence

2020 ◽  
Vol 222 (1) ◽  
pp. 153-168 ◽  
Author(s):  
Elizabeth S Cochran ◽  
Robert J Skoumal ◽  
Devin McPhillips ◽  
Zachary E Ross ◽  
Katie M Keranen
Keyword(s):  
Stress Field ◽  
Compressive Stress ◽  
Local Stress ◽  
Wastewater Disposal ◽  
Principal Compressive Stress ◽  
Vertical Fault ◽  
Major Fault ◽  
Pressure Changes ◽  
Earthquake Sequences ◽  
Local Stress Field

SUMMARY The orientations of faults activated relative to the local principal stress directions can provide insights into the role of pore pressure changes in induced earthquake sequences. Here, we examine the 2011 M 5.7 Prague earthquake sequence that was induced by nearby wastewater disposal. We estimate the local principal compressive stress direction near the rupture as inferred from shear wave splitting measurements at spatial resolutions as small as 750 m. We find that the dominant azimuth observed is parallel to previous estimates of the regional compressive stress with some secondary azimuths oriented subparallel to the strike of the major fault structures. From an extended catalogue, we map ten distinct fault segments activated during the sequence that exhibit a wide array of orientations. We assess whether the five near-vertical fault planes are optimally oriented to fail in the determined stress field. We find that only two of the fault planes, including the M   5.7 main shock fault, are optimally oriented. Both the M 4.8 foreshock and M   4.8 aftershock occur on fault planes that deviate 20–29° from the optimal orientation for slip. Our results confirm that induced event sequences can occur on faults not optimally oriented for failure in the local stress field. The results suggest elevated pore fluid pressures likely induced failure along several of the faults activated in the 2011 Prague sequence.

scholarly journals Recent active faults in Belgian Ardenne revealed in Rochefort Karstic network (Namur Province, Belgium)

2001 ◽  
Vol 80 (3-4) ◽  
pp. 297-304 ◽  
Author(s):  
S. Vandycke ◽  
Y. Quinif
Keyword(s):  
Stress Field ◽  
Active Faults ◽  
Ground Surface ◽  
Local Stress ◽  
Tectonic Activity ◽  
Normal Faults ◽  
Regional Stress ◽  
Bedding Planes ◽  
Local Modification ◽  
A Minor

AbstractThis paper presents observations of recent faulting activity in the karstic network of the Rochefort Cave (Namur Province, Belgium, Europe). The principal recent tectonic features are bedding planes reactivated as normal faults, neo-formatted normal faults in calcite flowstone, fresh scaling, extensional features, fallen blocks and displacement of karstic tube. The seismo-tectonic aspect is expanded by the presence of fallen blocks where normally the cavity must be very stable and in equilibrium. Three main N 070° fault planes and a minor one affect, at a decimetre scale, the karst features and morphology. The faults are still active because recent fresh scaling and fallen blocks are observable. The breaking of Holocene soda straw stalactites and displacements of artificial features observed since the beginning of the tourist activity, in the last century, also suggest very recent reactivation of these faults. This recent faulting can be correlated to present-day tectonic activity, already evidenced by earthquakes in the neighbouring area. Therefore, karstic caves are favourable sites for the observation and the quantification of recent tectonic activity because they constitute a 3-D framework, protected from erosion. Fault planes with this recent faulting present slickensides. Thus a quantitative analysis in term of stress inversion, with the help of striated faults, has permitted to reconstruct the stress tensor responsible for the brittle deformation. The principal NW-SE extension (σ3 horizontal) is nearly perpendicular to that of the present regional stress as illustrated by the analysis of the last strong regional earthquake (Roermond, The Netherlands) in 1992. During the Meso-Cenozoic, the main stress tectonics recorded in this part of the European platform is similar to the present one with a NE-SW direction of extension.The discrepancy between the regional stress field and the local stress in the Rochefort cave can be the result of the inversion of the σ2 and σ3 axes of the stress ellipsoid due to its symmetry or of a local modification at the ground surface of the crustal stress field as it has been already observed in active zones.

A simplified method to predict the local stress field and N-SIF of V-shaped notch

2020 ◽  
Vol 234 ◽  
pp. 107096 ◽  
Author(s):  
Wei Shen ◽  
Guiming Liang ◽  
Chunmei Li ◽  
Enqian Liu
Keyword(s):  
Stress Field ◽  
Local Stress ◽  
Simplified Method ◽  
Local Stress Field

Seismic anisotropy time variations at Mt Etna

2019 ◽  
Vol 220 (1) ◽  
pp. 450-460
Author(s):  
Lucia Nardone ◽  
Francesca Bianco ◽  
Lucia Zaccarelli ◽  
Domenico Patanè
Keyword(s):  
Time Delay ◽  
Stress Field ◽  
Shear Wave ◽  
Local Stress ◽  
Temporal Variations ◽  
Fast Wave ◽  
Polarization Direction ◽  
Stress Changes ◽  
Mt Etna ◽  
Local Stress Field

SUMMARY The aim of this paper is to study the temporal variations in the seismic wavefield associated with the stress changes in the dynamic features of the Mt Etna volcanic activity. We used shear wave splitting analysis on a huge data set of local earthquakes, in order to identify changes of the local stress field at Mt Etna during the time interval from 2006 to 2011. This analysis allows us to obtain two parameters: the polarization direction of the fast shear wave (φ) and the time delay of the slow shear wave (Td,time delay between the split shear waves). Orientation of φ generally provides information about the anisotropic symmetry and stress direction whereas Td provide information about the average crack density along the ray path. Based on our findings it is possible to divide Etna Volcano in three different sectors, each one distinguished by typical fast wave polarization direction. We find that the western part of the volcano is controlled by the regional tectonic stress field having a NS and EW directions. Instead, the eastern part of the volcano is mainly controlled by the local volcanic stress, particularly an EW local stress field in the NE sector (Pernicana), and a quasi NS local stress field in the SE sector (Mascalucia, Timpe), where previous studies evidenced: (i) some low-Qp anomaly regions between 0 and about 6 km depth, probably associated with high pore pressure and the intense faulting and (ii) by magnetotelluric surveys, several high conductivity zones, up to 8 km depth, related to a diffuse presence of hydrothermal activity and fluid circulation. Temporal variations in time delay, mostly before the 2008–2009 lateral eruption, can be interpreted as stress accumulation increase with a consequent release of stress due to coalescing of microcracks in the conduit for the eruption of magma.

Modeling the local stress field and kinematics of the San Andreas fault system

1979 ◽  
Vol 52 (1-4) ◽  
pp. 647-663 ◽  
Author(s):  
D.N. Osokina ◽  
A.A. Nikonov ◽  
N.Yu. Tsvetkova
Keyword(s):  
Stress Field ◽  
San Andreas Fault ◽  
Local Stress ◽  
Fault System ◽  
San Andreas ◽  
San Andreas Fault System ◽  
Local Stress Field

Size Dependent Micro-Stress-Field of Fibers in Eutectic Ceramic Rod

2010 ◽  
Vol 168-170 ◽  
pp. 226-229
Author(s):  
Hai Xing Lu ◽  
Xie Quan Liu ◽  
Xin Hua Ni ◽  
Tao Sun ◽  
Bao Feng Li
Keyword(s):  
Stress Field ◽  
Local Stress ◽  
Apparent Size ◽  
Average Strain ◽  
Size Dependent ◽  
Three Phase ◽  
Stress Boundary Condition ◽  
Stress Boundary ◽  
Remote Stress ◽  
Local Stress Field

Considering the interaction between fiber-inclusion and strong constraining interphase, forth-phase model is suggested to determine the local stress field distribution of three-phase element in eutectic ceramic rod. On the basis of the volumetric average strain, the effective compliance tensor increment of eutectic ceramic rod is obtained. The remote stress boundary condition of the eutectic ceramic rod is accounted for getting the micro stress field of fibers in eutectic ceramic rod. The results show the micro stress field of the fiber-inclusion in eutectic ceramic rod is associated with the stiffness and the volume fractions of each component in eutectic ceramic rod, the shape of interphase and fiber. The micro stress field has apparent size effect: three direction stresses increase with the diameter of fiber- inclusion.

Sign in / Sign up

Export Citation Format

Share Document