The effect of irrigation on the growth and yield components of poppies (Papaver somniferum L.)

1987 ◽  
Vol 108 (2) ◽  
pp. 389-394 ◽  
Author(s):  
B. Chung

SummaryThe effects of four irrigation treatments on the growth and yield of poppies were studied in two ‘drought’ seasons in Tasmania. Irrigation increased total dry-matter production, leaf area index and delayed leaf senescence in both seasons. Irrigation, which continued until leaf senescence, increased total morphine yield by 5–20 kg/ha compared with no irrigation. This yield increase was attributed to the increase in the number and yield of lateral heads, the yield of terminal heads and capsule morphine concentration.As the effects of irrigation on head yield reflect the effects on total dry-matter production, irrigation guidelines for poppies were developed from an analysis of plant growth during theseason. For maximum yield, one irrigation of 50 mm should be applied at the 50% hook stage, at 50% flowering, at the end of flowering and 2 weeks after the end of flowering. Growers who currently cease irrigation at 50% flowering can expect yield increases of 4–13 kg/ha ifthey apply two further irrigations thereafter.

Author(s):  
B. Sreedevi ◽  
Aarti Singh ◽  
M. Tejaswini

Aerobic rice is a new way of cultivating rice that requires less water than lowland rice. A field experiment was conducted during the kharif season of 2015 to evaluate the effects of nutrient management with Biofertilizers on growth and yield attributes, yield, nutrient uptake and economics different rice cultivars. The experiment was laid out split plot design with four replications. Main plot treatments consisted of two cultivars viz., whereas, sub plot treatments comprised of nutrient management practices namely, N1-125% RDF, N2-125% RDF + Biofertilizers, N3 -100% RDF, N4 -100% RDF + Biofertilizers, N5-75% RDF, N6-75% RDF + Biofertilizers. The source of biofertiliser was a combination of Azospirillum, Phosphorus Solubilizing Bacteria and Potassium Solubilizer applied @ 5 kg/ha-1. Crop dry matter production (2582.3 g/m2), root dry matter production (910.1 g/m2), tillers/m2 (566), leaf area index (4.54), panicles/m2 (535), panicle length (23.81), panicle weight (4.56) and test weight (25.3) was higher in PA 6444 compared to DRR Dhan 44. Higher uptake of nutrients was also observed in PA 6444. Rice fertilized with 125% RDF + Biofertilizers (N2) produced higher crop (2901.6 g/m2) and root dry matter production (1028.1 g/m2), tillers/m2 (561) and leaf area index (5.19). This treatment also recorded higher yield attributes and grain yield (3.55 t/ha). With respect to nutrient uptake, application of 125% RDF + Biofertilizers (N2) recorded      higher N, P and K uptake by grain and straw and higher profitability (1.57) than other nutrient combinations.


Author(s):  
Dhimmagudi Ramamohan Reddy ◽  
P. Shalini Pillai ◽  
Jacob John ◽  
A. Sajeena ◽  
J.C. Aswathy

Background: In the recent years, the yield plateau of the major cereals together with the climate change concerns, the potential of millets and pulses have been identified as pivotal for addressing the agrarian and nutritional challenges. The present study was conducted to assess the feasibility of intercropping green gram, black gram and cowpea in finger millet.Methods: A field experiment was conducted during summer 2019-2020 (February to May, 2020) to assess the variation in the growth and yield of pulses, viz., green gram, black gram and cowpea on intercropping with finger millet, along with and without AMF inoculation.Result: Pulses were observed to be significantly taller when intercropped with finger millet in the presence of AMF. Leaf area index (LAI), dry matter production, seed yield and haulm yield were higher for sole crops. Between the intercropping treatments, with and without AMF, LAI, dry matter production and seed yield were superior when pulses where intercropped in finger millet inoculated with AMF. Intercropping finger millet with cowpea recorded the highest finger millet equivalent yield (FMEY) followed by black gram and green gram. The treatment, T6 (finger millet with AMF + cowpea) registered the highest FMEY (3388 kg ha-1) followed by T5 (3234 kg ha-1). Intercropping finger millet (with AMF) with black gram (T4) and green gram (T2) recorded FMEY of 2708 kg ha-1 and 2497 kg ha-1 respectively.


2014 ◽  
Vol 11 (1) ◽  
pp. 81-89 ◽  
Author(s):  
FU Rasool ◽  
B Hassan ◽  
A Jahangir

A field experiment was conducted at the Research farm, Division of Agronomy, Sher-e-Kashmir University of Agricultural Sciences and Technology, India for two consecutive rainy (kharif) seasons of 2009 and 2010 to find out the impact of nitrogen, sulphur and farmyard manure (FYM) on growth and yield of sunflower (Helianthus annuus L.). Application of 120 kg N ha-1 significantly increased all the yield components viz., plant height, leaf area index, dry matter production, capitulum diameter, achenes capitulum-1 and 1000-seed weight. Pooled yield increased by 26% with 120 kg N but it was statistically at par with 80 kg N ha-1. With increased N dose, the oil content consistently decreased but the oil yield improved during both years. Sulphur application at the rate of 60 kg ha-1 significantly increased plant height, leaf area index and dry matter production after 25 days of sowing (DAS). All yield contributing characters viz., filled achenes capitulum-1, head diameter and 1000-seed weights were higher with 60 kg S ha-1 over 30 kg S ha-1. Seed and stalk yield with 60 kg S ha-1 were significantly higher than those of 30 kg S ha-1. Similarly, oil content and oil yield with 60kg Sha-1 was 2 and 10.5 % over 30 kg S ha-1. Application of FYM at the rate of 10 and 20 t ha-1 was at par with each other but recorded significant improvement in the plant height, leaf area index and dry matter production of sunflower after 25 days of sowing over no FYM. FYM @10 and 20 t ha-1 increased the oil yield by 11 and 5.4 %, respectively over no application. DOI: http://dx.doi.org/10.3329/sja.v11i1.18386 SAARC J. Agri., 11(1): 81-89 (2013)


1994 ◽  
Vol 122 (2) ◽  
pp. 241-247 ◽  
Author(s):  
Prabhjeet Singh ◽  
S. C. Bhargava

SUMMARYInoculation ofBrassica napuscv. ISN–129 withAzotobacter chroococcumfollowing the application of different amounts of nitrogen produced the greatest increase in seed yield and total dry matter when no external nitrogen had been applied. The yield increase in response to inoculation could be attributed to a greater number of primary branches and pods, associated with a higher leaf area index, particularly at the pod-filling stage, and a faster crop growth rate.


1982 ◽  
Vol 22 (115) ◽  
pp. 76 ◽  
Author(s):  
KA Boundy ◽  
TG Reeves ◽  
HD Brooke

The effect of serial planting on dry matter production, leaf area, grain yield and yield components cf Lupinus angustifoiius (cvv. Uniwhite, Uniharvest and Unicrop) and L. albus (cv. Ultra) was investigated in field plots at Rutherglen in 1973 and 1974. Delayed planting reduced dry matter production of all cultivars, and leaf area for Ultra. Differences in dry matter partitioning were observed between the late flowering Uniharvest, and the early flowering Unicrop and Ultra. In Uniharvest, delayed plantings resulted in a greater proportion of total dry matter being produced during the flowering phase, whereas the reverse was true for Unicrop and Ultra. The later flowering cultivars showed marked grain yield and yield component reduction with later sowing. Yields were reduced by 160.6 kg/ha and 222.5 kg/ha for each week's delay in sowing Uniharvest and Uniwhite, respectively. This effect was offset in the early flowering cultivars by greater development of lateral branches. In addition, when Unicrop and Ultra were planted in April, pod and flower abortion on the main stem resulted from low temperatures at flowering time. Optimum sowing time was early April for Uniwhite and Uniharvest, and early May for Unicrop and Ultra. Excellent vegetative growth under ideal moisture conditions highlighted the poor harvest indices of lupins and the scope for genetic improvement in the genus.


1990 ◽  
Vol 41 (3) ◽  
pp. 449 ◽  
Author(s):  
GK McDonald

The growth and yield of two lines of uniculm barley, WID-103 and WID-105, were compared over a range of sowing rates (50-400 kg/ha) with the commercial varieties Galleon and Schooner. The experiments were conducted at Strathalbyn, S.A., in 1986, 1987 and 1988 and at the Waite Agricultural Research Institute in 1987. A third tillered variety, Clipper, was included in the comparison in 1988. Over the three years plant populations measured early in the season ranged from 39/m2 to 709/m2, and grain yields from 97 to 41 1 g/m2. Dry matter production at ear emergence increased with greater plant density, and both the tillered varieties and the uniculm lines showed similar responses to higher sowing rates. At maturity, dry matter production of the tillered barleys was greater than or equal to that of the uniculms and the harvest indices (HIs) of the two types were similar. Consequently, grain yields of the tillered types were greater than or equal to the yields of the uniculms. Over the four experiments the tillered varieties had a 6% higher yield. The number of ears/m2 was the yield component most affected by plant density in both the tillered and uniculm barleys. The uniculm lines had more spikelets/ear, but tended to set fewer grains/spikelet and produce smaller kernels. The experiments failed to demonstrate any advantage of the uniculm habit to the grain yield of barley. These results differ from previous experiments that showed that a uniculm line, WID-101, had a higher yield than the tillered variety Clipper. It is suggested that the uniculm habit per se was not the cause of this higher yield, but its higher HI resulted in it outyielding Clipper. Current varieties, however, have HIs similar to the uniculm lines and yield equally to or more than the uniculm barleys examined. To further improve the grain yield of uniculm barley, greater dry matter production is necessary as the HIs of these lines are already high.


2006 ◽  
Vol 46 (1) ◽  
pp. 93 ◽  
Author(s):  
G. K. McDonald

High spatial and temporal variability is an inherent feature of dryland cereal crops over much of the southern cereal zone. The potential limitations to crop growth and yield of the chemical properties of the subsoils in the region have been long recognised, but there is still an incomplete understanding of the relative importance of different traits and how they interact to affect grain yield. Measurements were taken in a paddock at the Minnipa Agriculture Centre, Upper Eyre Peninsula, South Australia, to describe the effects of properties in the topsoil and subsoil on plant dry matter production, grain yield and plant nutrient concentrations in two consecutive years. Wheat (Triticum aestivum L. cv. Worrakatta) was grown in the first year and barley (Hordeum vulgare L. cv. Barque) in the second. All soil properties except pH showed a high degree of spatial variability. Variability in plant nutrient concentration, plant growth and grain yield was also high, but less than that of most of the soil properties. Variation in grain yield was more closely related to variation in dry matter at maturity and in harvest index than to dry matter production at tillering and anthesis. Soil properties had a stronger relationship with dry matter production and grain yield in 1999, the drier of the two years. Colwell phosphorus concentration in the topsoil (0–0.15 m) was positively correlated with dry matter production at tillering but was not related to dry matter production at anthesis or with grain yield. Subsoil pH, extractable boron concentration and electrical conductivity (EC) were closely related. The importance of EC and soil extractable boron to grain yield variation increased with depth, but EC had a greater influence than the other soil properties. In a year with above-average rainfall, very little of the variation in yield could be described by any of the measured soil variables. The results suggest that variation in EC was more important to describing variation in yield than variation in pH, extractable boron or other chemical properties.


Sign in / Sign up

Export Citation Format

Share Document