scholarly journals The Accretion Disk Model for the First Hundred Days of the Outburst Evolution in the Black Hole X-Ray Novae

1996 ◽  
Vol 158 ◽  
pp. 139-140
Author(s):  
S.-W. Kim ◽  
J. C. Wheeler ◽  
S. Mineshige
Keyword(s):  
Mass Transfer ◽  
Black Hole ◽  
Accretion Disk ◽  
Mass Transfer Rate ◽  
Time Dependent ◽  
Disk Model ◽  
X Ray ◽  
Outer Disk ◽  
Appreciable Increase ◽  
Shadowing Effect

We present time-dependent, irradiated, accretion disk models for the black hole X-ray novae in the first hundred days of the dwarf nova-like outbursts, including the rise, precursor, maximum and the secondary re-flare. This work is based on the disk instability model (Kim, Mineshige & Wheeler 1996, Kim, Wheeler & Mineshige 1996). The model is reasonably consistent with the observed optical light curves. The irradiators are the central hot region around the black hole, and the corona or chromosphere above the accretion disk. In addition, we include the time-dependent shadowing effect and consequent blocking of the outer portions of the disk from the central irradiator. We find the stagnation phenomenon whereby the disk stays in the intermediate temperature stage between the hot and cool state. This can explain the recently discovered optical precursor rise prior to the maximum light in Nova Sco 1994 (Bailyn et al. 1995: see Fig. 1). We suggest the secondary re-flare after the maximum is due to the coupled effects of the irradiation and stagnation. In the model, the stagnation phenomenon during the rise results from the partial ionization and molecular opacity. In addition, we find irradiation-induced stagnation during the decay phase, which is consistent with the observed secondary re-flare in X-ray novae (see Fig. 1). In the overall evolution of model outbursts in the first hundred days, the outer disk is blocked from the irradiation and, in turn, the companion star may not be strongly irradiated. This suggests that there is no appreciable increase of mass transfer rate during the decay prior to the secondary re-flare, unlike the behaviour in the mass transfer burst models.

scholarly journals Accretion Onto the Neutron Star in Be/X-ray Binaries

2004 ◽  
Vol 218 ◽  
pp. 449-450
Author(s):  
Kimitake Hayasaki ◽  
Atsuo T. Okazaki
Keyword(s):  
Neutron Star ◽  
High Resolution ◽  
Accretion Disk ◽  
Time Dependent ◽  
Disk Model ◽  
X Ray ◽  
Short Period ◽  
Be Star ◽  
X Ray Binaries ◽  
Resolution Simulation

We study accretion onto the neutron star in Be/X-ray binaries, using a 3D SPH code and the data imported from a high resolution simulation by Okazaki et al. (2002) for a coplanar system with a short period (Porb = 24.3 d) and moderate eccentricity (e = 0.34). We find that a time-dependent accretion disk is formed around the neutron star in Be/X-ray binaries. The disk shrinks after the periastron passage of the Be star and restores its radius afterwards. Our simulations show that the truncated Be disk model for Be/X-ray binaries is consistent with the observed X-ray behavior.

Constraining Progenitors of Observed Low-mass X-ray Binaries Using Convection and Rotation-Boosted Magnetic Braking

2021 ◽  
Vol 922 (2) ◽  
pp. 174
Author(s):  
Kenny X. Van ◽  
Natalia Ivanova
Keyword(s):  
Mass Transfer ◽  
Binary Systems ◽  
Formation Rate ◽  
Mass Transfer Rate ◽  
Population Synthesis ◽  
X Ray ◽  
Synthesis Technique ◽  
Low Mass ◽  
Magnetic Braking ◽  
X Ray Binaries

Abstract We present a new method for constraining the mass transfer evolution of low-mass X-ray binaries (LMXBs)—a reverse population synthesis technique. This is done using the detailed 1D stellar evolution code MESA (Modules for Experiments in Stellar Astrophysics) to evolve a high-resolution grid of binary systems spanning a comprehensive range of initial donor masses and orbital periods. We use the recently developed convection and rotation-boosted (CARB) magnetic braking scheme. The CARB magnetic braking scheme is the only magnetic braking prescription capable of reproducing an entire sample of well-studied persistent LMXBs—those with mass ratios, periods, and mass transfer rates that have been observationally determined. Using the reverse population synthesis technique, where we follow any simulated system that successfully reproduces an observed LMXB backward, we have constrained possible progenitors for each observed well-studied persistent LMXB. We also determined that the minimum number of LMXB formations in the Milky Way is 1500 per Gyr if we exclude Cyg X-2. For Cyg X-2, the most likely formation rate is 9000 LMXB Gyr−1. The technique we describe can be applied to any observed LMXB with well-constrained mass ratio, period, and mass transfer rate. With the upcoming GAIA DR3 containing information on binary systems, this technique can be applied to the data release to search for progenitors of observed persistent LMXBs.

scholarly journals Dynamical Evolution of Accretion Flow onto a Black Hole

1998 ◽  
Vol 188 ◽  
pp. 455-456
Author(s):  
M. Yokosawa
Keyword(s):  
Black Hole ◽  
Active Galactic Nuclei ◽  
Event Horizon ◽  
Accretion Disk ◽  
Dynamical Evolution ◽  
Galactic Nuclei ◽  
Thick Disk ◽  
X Ray ◽  
General Relativistic ◽  
Inner Region

Active galactic nuclei(AGN) produce many type of active phenomena, powerful X-ray emission, UV hump, narrow beam ejection, gamma-ray emission. Energy of these phenomena is thought to be brought out binding energy between a black hole and surrounding matter. What condition around a black hole produces many type of active phenomena? We investigated dynamical evolution of accretion flow onto a black hole by using a general-relativistic, hydrodynamic code which contains a viscosity based on the alpha-model. We find three types of flow's pattern, depending on thickness of accretion disk. In a case of the thin disk with a thickness less than the radius of the event horizon at the vicinity of a marginally stable orbit, the accreting flow through a surface of the marginally stable orbit becomes thinner due to additional cooling caused by a general-relativistic Roche-lobe overflow and horizontal advection of heat. An accretion disk with a middle thickness, 2rh≤h≤ 3rh, divides into two flows: the upper region of the accreting flow expands into the atmosphere of the black hole, and the inner region of the flow becomes thinner, smoothly accreting onto the black hole. The expansion of the flow generates a dynamically violent structure around the event horizon. The kinetic energy of the violent motion becomes equivalent to the thermal energy of the accreting disk. The shock heating due to violent motion produces a thermally driven wind which flows through the atmosphere above the accretion disk. A very thick disk, 4rh≤h,forms a narrow beam whose energy is largely supplied from hot region generated by shock wave. The accretion flowing through the thick disk,h≥ 2rh, cannot only form a single, laminar flow falling into the black hole, but also produces turbulent-like structure above the event horizon. The middle disk may possibly emit the X-ray radiation observed in active galactic nuclei. The thin disk may produce UV hump of Seyfert galaxy. Thick disk may produce a jet observed in radio galaxy. The thickness of the disk is determined by accretion rate, such ashκ κes/cṁf(r) κ 10rhṁf(r), at the inner region of the disk where the radiation pressure dominates over the gas pressure. Here, Ṁ is the accretion rate and ṁ is the normarized one by the critical-mass flux of the Eddington limit. κesandcare the opacity by electron scattering and the velocity of light.f(r) is a function with a value of unity far from the hole.

scholarly journals Mass transfer on a nuclear timescale in models of supergiant and ultra-luminous X-ray binaries

2019 ◽  
Vol 628 ◽  
pp. A19 ◽  
Author(s):  
M. Quast ◽  
N. Langer ◽  
T. M. Tauris
Keyword(s):  
Mass Transfer ◽  
Black Hole ◽  
Neutron Star ◽  
Roche Lobe ◽  
High Mass ◽  
X Rays ◽  
X Ray ◽  
Mass Ratios ◽  
X Ray Binaries ◽  
Eddington Limit

Context. The origin and number of the Galactic supergiant X-ray binaries is currently not well understood. They consist of an evolved massive star and a neutron star or black-hole companion. X-rays are thought to be generated from the accretion of wind material donated by the supergiant, while mass transfer due to Roche-lobe overflow is mostly disregarded because the high mass ratios of these systems are thought to render this process unstable. Aims. We investigate how the proximity of supergiant donor stars to the Eddington limit, and their advanced evolutionary stage, may influence the evolution of massive and ultra-luminous X-ray binaries with supergiant donor stars (SGXBs and ULXs). Methods. We constructed models of massive stars with different internal hydrogen and helium gradients (H/He gradients) and different hydrogen-rich envelope masses, and exposed them to slow mass-loss to probe the response of the stellar radius. In addition, we computed the corresponding Roche-lobe overflow mass-transfer evolution with our detailed binary stellar evolution code, approximating the compact objects as point masses. Results. We find that a H/He gradient in the layers beneath the surface, as it is likely present in the well-studied donor stars of observed SGBXs, can enable mass transfer in SGXBs on a nuclear timescale with a black-hole or a neutron star accretor, even for mass ratios in excess of 20. In our binary evolution models, the donor stars rapidly decrease their thermal equilibrium radius and can therefore cope with the inevitably strong orbital contraction imposed by the high mass ratio. We find that the orbital period derivatives of our models agree well with empirical values. We argue that the SGXB phase may be preceded by a common-envelope evolution. The envelope inflation near the Eddington limit means that this mechanism more likely occurs at high metallicity. Conclusion. Our results open a new perspective for understanding that SGBXs are numerous in our Galaxy and are almost completely absent in the Small Magellanic Cloud. Our results may also offer a way to find more ULX systems, to detect mass transfer on nuclear timescales in ULX systems even with neutron star accretors, and shed new light on the origin of the strong B-field in these neutron stars.

scholarly journals Warm and thick corona for a magnetically supported disk in galactic black hole binaries

2020 ◽  
Vol 633 ◽  
pp. A35 ◽  
Author(s):  
D. Gronkiewicz ◽  
A. Różańska
Keyword(s):  
Magnetic Field ◽  
Black Hole ◽  
Accretion Disk ◽  
Thermal Instability ◽  
Stellar Mass ◽  
Rotational Instability ◽  
X Ray ◽  
Black Hole Binaries ◽  
Radiative Processes ◽  
Gas Heating

Context. We self-consistently model a magnetically supported accretion disk around a stellar-mass black hole with a warm optically thick corona based on first principles. We consider the gas heating by magneto-rotational instability dynamo. Aims. Our goal is to show that the proper calculation of the gas heating by magnetic dynamo can build up the warm optically thick corona above the accretion disk around a black hole of stellar mass. Methods. Using the vertical model of the disk supported and heated by the magnetic field together with radiative transfer in hydrostatic and radiative equilibrium, we developed a relaxation numerical scheme that allowed us to compute the transition form the disk to corona in a self-consistent way. Results. We demonstrate here that the warm (up to 5 keV) optically thick (up to 10 τes) Compton-cooled corona can form as a result of magnetic heating. A warm corona like this is stronger in the case of the higher accretion rate and the greater magnetic field strength. The radial extent of the warm corona is limited by local thermal instability, which purely depends on radiative processes. The obtained coronal parameters are in agreement with those constrained from X-ray observations. Conclusions. A warm magnetically supported corona tends to appear in the inner disk regions. It may be responsible for soft X-ray excess seen in accreting sources. For lower accretion rates and weaker magnetic field parameters, thermal instability prevents a warm corona, giving rise to eventual clumpiness or ionized outflow.

Sign in / Sign up

Export Citation Format

Share Document