scholarly journals Extraordinary strong jump of increasing laser fusion gains experienced at volume ignition for combination with NIF experiments

2013 ◽  
Vol 31 (2) ◽  
pp. 229-232 ◽  
Author(s):  
Heinrich Hora

AbstractAiming breakeven for nuclear fusion energy needs a more than 1000 times higher fusion gain. This may be achieved as the anomalously high jump of gains known from the discovery of volume ignition since 1978. This is considered for combination with the present most advanced experiments at the world highest class laser of NIF.

2012 ◽  
Vol 60 (4) ◽  
pp. 729-738
Author(s):  
J. Badziak

Abstract In 2009, in Lawrence Livermore National Laboratory, USA, National Ignition Facility (NIF) - the largest thermonuclear fusion device ever made was launched. Its main part is a multi-beam laser whose energy in nanosecond pulse exceeds 1MJ (106 J). Its task is to compress DT fuel to the density over a few thousand times higher than that of solid-state DT and heat it to 100 millions of K degrees. In this case, the process of fuel compression and heating is realized in an indirect way - laser radiation (in UV range) is converted in the so-called hohlraum (1 cm cylinder with a spherical DT pellet inside) into very intense soft X radiation symmetrically illuminating DT pellet. For the first time ever, the fusion device’s energetic parameters are sufficient for the achieving the ignition and self-sustained burn of thermonuclear fuel on a scale allowing for the generation of energy far bigger than that delivered to the fuel. The main purpose of the current experimental campaign on NIF is bringing about, within the next two-three years, a controlled thermonuclear ‘big bang’ in which the fusion energy will exceed the energy delivered by the laser at least ten times. The expected ‘big bang’ would be the culmination of fifty years of international efforts aiming at demonstrating both physical and technical feasibility of generating, in a controlled way, the energy from nuclear fusion in inertial confined plasma and would pave the way for practical realization of the laser-driven thermonuclear reactor. This paper briefly reviews the basic current concepts of laser fusion and main problems and challenges facing the research community dealing with this field. In particular, the conventional, central hot spot ignition approach to laser fusion is discussed together with the more recent ones - fast ignition, shock ignition and impact ignition fusion. The research projects directed towards building an experimental laser-driven thermonuclear reactor are presented as well


Subject The outlook for the development of nuclear fusion as an energy source. Significance The last two years have seen several projects reporting 'significant' progress towards the goal of developing nuclear fusion energy. This form of energy replicates the processes that drive the sun and is considered the ideal form of energy generation -- safe, clean, resource-efficient and effectively 'unlimited'. Impacts The France-based INTER project will not be ready until 2025, even assuming funds continue to flow at the required rate. Funding in China looks solid; China may decide to increase it to move to a more advanced experimental reactor. Germany's stellarator design offers an alternative technological path.


1992 ◽  
Vol 10 (1) ◽  
pp. 145-154 ◽  
Author(s):  
P. Pieruschka ◽  
L. Cicchitelli ◽  
R. Khoda-Bakhsh ◽  
E. Kuhn ◽  
G. H. Miley ◽  
...  

Since DT laser fusion with 10-MJ laser pulses for 1000-MJ output now offers the physics solution for an economical fusion energy reactor, the conditions are evaluated assuming that controlled ICF reactions will become possible in the future using clean nuclear fusion fuel such as deuterium-helium(3) or hydrogen-boron(11). Using the transparent physics mechanisms of volume ignition of the fuel capsules, we show that the volume ignition for strong reduction of the optimum initial temperature can be reached for both types of fuels if a compression about 100 times higher than those in present-day laser compression experiments is attained in the future. Helium(3) laser-pulse energies are then in the same range as for DT, but ten times higher energies will be required for hydrogenboron(11).


2008 ◽  
Vol 26 (1) ◽  
pp. 2-8 ◽  
Author(s):  
K. Imasaki ◽  
D. Li

AbstractAn approach to an alternative laser fusion in a magnetic field with an intense laser of exa watt level will be discussed. Such a strong field in an exa watt laser will induce enhanced nuclear tunneling through the propagation in plasma. This causes an enhanced nuclear reaction for fusion. We discuss the possibilities to apply this to nuclear fusion energy and to obtain break even in a 100 kJ laser.


2011 ◽  
Vol 110-116 ◽  
pp. 2054-2061 ◽  
Author(s):  
Ugur Guven ◽  
Piyush Kuchhal

One of the biggest challenges that the world faces is definitely the need for more energy. As the world’s fossil fuel supplies dwindle down, it becomes more and more important to find clean sources of energy that can also fulfill the global demand for more energy. Fortunately, aerospace technology can be of use, as the moon can be used to harvest3He, which can be a clean source of nuclear fuel for fusion reaction on Earth, as well as on the moon. This paper will demonstrate that the concept of moon mining needs to be explored further as3He can be of great use for solving the world’s energy needs.


2013 ◽  
Vol 10 (81) ◽  
pp. 20120984 ◽  
Author(s):  
James Barber ◽  
Phong D. Tran

Demand for energy is projected to increase at least twofold by mid-century relative to the present global consumption because of predicted population and economic growth. This demand could be met, in principle, from fossil energy resources, particularly coal. However, the cumulative nature of carbon dioxide (CO 2 ) emissions demands that stabilizing the atmospheric CO 2 levels to just twice their pre-anthropogenic values by mid-century will be extremely challenging, requiring invention, development and deployment of schemes for carbon-neutral energy production on a scale commensurate with, or larger than, the entire present-day energy supply from all sources combined. Among renewable and exploitable energy resources, nuclear fusion energy or solar energy are by far the largest. However, in both cases, technological breakthroughs are required with nuclear fusion being very difficult, if not impossible on the scale required. On the other hand, 1 h of sunlight falling on our planet is equivalent to all the energy consumed by humans in an entire year. If solar energy is to be a major primary energy source, then it must be stored and despatched on demand to the end user. An especially attractive approach is to store solar energy in the form of chemical bonds as occurs in natural photosynthesis. However, a technology is needed which has a year-round average conversion efficiency significantly higher than currently available by natural photosynthesis so as to reduce land-area requirements and to be independent of food production. Therefore, the scientific challenge is to construct an ‘artificial leaf’ able to efficiently capture and convert solar energy and then store it in the form of chemical bonds of a high-energy density fuel such as hydrogen while at the same time producing oxygen from water. Realistically, the efficiency target for such a technology must be 10 per cent or better. Here, we review the molecular details of the energy capturing reactions of natural photosynthesis, particularly the water-splitting reaction of photosystem II and the hydrogen-generating reaction of hydrogenases. We then follow on to describe how these two reactions are being mimicked in physico-chemical-based catalytic or electrocatalytic systems with the challenge of creating a large-scale robust and efficient artificial leaf technology.


2009 ◽  
Vol 41 (4) ◽  
pp. 455-476 ◽  
Author(s):  
My-Eun Kwon ◽  
Young-Soon Bae ◽  
Seung-Yon Cho ◽  
Won-Ho Choe ◽  
Bong-Geun Hong ◽  
...  

Author(s):  
L. Bianchi ◽  
P. Brelivet ◽  
A. Freslon ◽  
A. Fornier ◽  
C. Cordillot ◽  
...  

Abstract The french laser megajoule (LMJ) is designed to produce, in laboratory, fusion energy with a significant gain. Such an energy could be achieved by imploding a small capsule filled with a DT mixture. Fusion experiments produce a large emission of neutrons, x-rays, laser scattered light and debris which impose a first wall protection for the laser target chamber made of a low Z and refractory material. As boron carbide appeared to be a good candidate, among others, it was decided to evaluate the potentiallity of plasma sprayed B4C coatings for this application. This paper deals with the optimization of plasma spraying conditions to built up coatings which satisfie specifications required for the first wall. Coating general properties are presented as well as outgassing performances. Specific x-ray and laser tests were performed to evaluate coating behavior close to real LMJ working conditions.


Author(s):  
Christopher J. Stolz

The National Ignition Facility (NIF), the world's largest and most energetic laser system, is now operational at Lawrence Livermore National Laboratory. The NIF will enable exploration of scientific problems in national strategic security, basic science and fusion energy. One of the early NIF goals centres on achieving laboratory-scale thermonuclear ignition and energy gain, demonstrating the feasibility of laser fusion as a viable source of clean, carbon-free energy. This talk will discuss the precision technology and engineering challenges of building the NIF and those we must overcome to make fusion energy a commercial reality.


Sign in / Sign up

Export Citation Format

Share Document