High-pressure freezing of cells in suspension for low-voltage scanning electron microscopy (LVSEM)

1991 ◽  
Vol 49 ◽  
pp. 64-65
Author(s):  
Marek Malecki ◽  
James Pawley ◽  
Hans Ris
Keyword(s):  
Electron Microscopy ◽  
High Pressure ◽  
Low Voltage ◽  
Culture Media ◽  
Cell Structure ◽  
Freeze Substitution ◽  
Ice Crystal ◽  
High Pressure Freezing ◽  
Cell Culture Media ◽  
Voltage Scanning

The ultrastructure of cells suspended in physiological fluids or cell culture media can only be studied if the living processes are stopped while the cells remain in suspension. Attachment of living cells to carrier surfaces to facilitate further processing for electron microscopy produces a rapid reorganization of cell structure eradicating most traces of the structures present when the cells were in suspension. The structure of cells in suspension can be immobilized by either chemical fixation or, much faster, by rapid freezing (cryo-immobilization). The fixation speed is particularly important in studies of cell surface reorganization over time. High pressure freezing provides conditions where specimens up to 500μm thick can be frozen in milliseconds without ice crystal damage. This volume is sufficient for cells to remain in suspension until frozen. However, special procedures are needed to assure that the unattached cells are not lost during subsequent processing for LVSEM or HVEM using freeze-substitution or freeze drying. We recently developed such a procedure.

High-pressure freezing and freeze substitution of plant tissue

1992 ◽  
Vol 50 (1) ◽  
pp. 748-749
Author(s):  
William P. Sharp ◽  
Robert W. Roberson
Keyword(s):  
High Pressure ◽  
Cell Structure ◽  
Leaf Tissue ◽  
Freeze Substitution ◽  
Crystal Formation ◽  
Ice Crystal ◽  
High Pressure Freezing ◽  
Cell Components ◽  
Cold Metal ◽  
Brome Grass

The aim of ultrastructural investigation is to analyze cell architecture and relate a functional role(s) to cell components. It is known that aqueous chemical fixation requires seconds to minutes to penetrate and stabilize cell structure which may result in structural artifacts. The use of ultralow temperatures to fix and prepare specimens, however, leads to a much improved preservation of the cell’s living state. A critical limitation of conventional cryofixation methods (i.e., propane-jet freezing, cold-metal slamming, plunge-freezing) is that only a 10 to 40 μm thick surface layer of cells can be frozen without distorting ice crystal formation. This problem can be allayed by freezing samples under about 2100 bar of hydrostatic pressure which suppresses the formation of ice nuclei and their rate of growth. Thus, 0.6 mm thick samples with a total volume of 1 mm3 can be frozen without ice crystal damage. The purpose of this study is to describe the cellular details and identify potential artifacts in root tissue of barley (Hordeum vulgari L.) and leaf tissue of brome grass (Bromus mollis L.) fixed and prepared by high-pressure freezing (HPF) and freeze substitution (FS) techniques.

Cryo-SEM and TEM of High Pressure Frozen Cells - Some Technical Contributions

2001 ◽  
Vol 7 (S2) ◽  
pp. 728-729
Author(s):  
Paul Walther
Keyword(s):  
High Pressure ◽  
Physiological State ◽  
Electron Microscopic Observation ◽  
Freeze Substitution ◽  
Chemical Fixation ◽  
Ice Crystal ◽  
High Pressure Freezing ◽  
Electron Microscopic ◽  
Biological Specimen ◽  
Freeze Fracturing

Imaging of fast frozen samples is the most direct approach for electron microscopy of biological specimen in a defined physiological state. It prevents chemical fixation and drying artifacts. High pressure freezing allows for ice-crystal-free cryo-fixation of tissue pieces up to a thickness of 200 urn and a diameter of 2 mm without prefixation. Such a frozen disc, however, is not directly amenable to electron microscopic observation: The structures of interest have to be made amenable to the electron beam, and the structures of interest must produce enough contrast to be recognized in the electron microscope. This can be achieved by freeze fracturing, cryo-sectioning or freeze substitution.The figures show high pressure frozen bakers yeast saccharomyces cerevisiae in the cryo-SEM (Figures 1 and 2) and after freeze substitution in the TEM (Figure 3). For high pressure freezing either a Bal-Tec HPM 010 (Princ. of Liechtenstein; Figures 1 and 2), or a Wohlwend HPF (Wohlwend GmbH, Sennwald, Switzerland; Figure 3) were used.

Low-Voltage Scanning Electron Microscopy of Mammalian Fertilization In Vitro: Preparation of Oocytes

1997 ◽  
Vol 3 (3) ◽  
pp. 193-202 ◽  
Author(s):  
Mark W. Tengowski ◽  
Gerald Schatten
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
High Pressure ◽  
Low Voltage ◽  
Fertilization In Vitro ◽  
Aldehyde Fixation ◽  
Bovine Oocytes ◽  
Voltage Scanning ◽  
Scanning Electron

Abstract: To optimize specimen-processing protocols for investigations of fertilization in mammals, with high-resolution, low-voltage scanning electron microscopy (LVSEM), bovine oocytes matured in vitro were prepared by either aldehyde fixation, conductive staining, or high-pressure cryoimmobilization with freeze-substitution. Samples prepared by these different preparative techniques were coated with either platinum or gold and imaged with an LVSEM operating at 1.5 keV. Additionally, aldehyde-fixed oocytes, sputter-coated with gold, were imaged with a conventional scanning electron microscope (cSEM). The results show that bovine oocytes prepared by aldehyde fixation or cryoimmobilized by high-pressure freezing produced superior images of the zona pellucida (ZP) compared with those from the conductive stained samples. A comparison of LVSEM and cSEM images suggests that the gold-coating employed in cSEM preparation obscures the ZP detail seen with the LVSEM, but not with the cSEM. Application of these procedures provide not only a new view of the ZP but may be useful in elucidating the molecular mechanism of gamete interactions during the fertilization process.

Electron microscopy analysis of maize basal endosperm transfer cells processed by high-pressure freezing and freeze-substitution

2008 ◽  
Vol 14 (S2) ◽  
pp. 1502-1503
Author(s):  
B-H Kang ◽  
D Williams ◽  
K Kelley ◽  
K Backer-Kelley ◽  
P Chourey
Keyword(s):  
Electron Microscopy ◽  
High Pressure ◽  
New Mexico ◽  
Freeze Substitution ◽  
Transfer Cells ◽  
High Pressure Freezing ◽  
Endosperm Transfer Cells ◽  
Electron Microscopy Analysis ◽  
Microscopy Analysis

Extended abstract of a paper presented at Microscopy and Microanalysis 2008 in Albuquerque, New Mexico, USA, August 3 – August 7, 2008

The Connective Tissue Matrix of Cartilage as Revealed by Standard Fixation, Ruthenium Staining, High-Pressure Freezing, and Embedding in Water Soluble Media: A Comparison of Methods

1990 ◽  
Vol 48 (2) ◽  
pp. 326-327
Author(s):  
Douglas R. Keene
Keyword(s):  
Electron Microscopy ◽  
High Pressure ◽  
Freeze Substitution ◽  
Uranyl Acetate ◽  
Ruthenium Red ◽  
Water Soluble ◽  
High Pressure Freezing ◽  
Electron Microscopic ◽  
Microscopic Evaluation ◽  
Embedding Medium

Proteoglycan is a major component of the cartilage extracellular matrix, and the overall structure of this anionic molecule is highly dependent on the hydrated environment of cartilage. Without specific stabilization, proteoglycans are extracted or collapsed during deydration while processing for electron microscopy. The purpose of these experiments is to determine a method by which the structure of proteoglycans might be stabilized for electron microscopic evaluation.Chick sternal cartilage was prepared for transmission electron microscopy by the following methods and the resultant tissue ultrastructure compared: A) 1.5/1.5% gluteraldehyde/paraformaldehyde and 1% OsO4 fixation, dehydration in ethanol, propylene oxide, and embedding in Spurrs epoxy B) Fixation as in (A) directly followed by infiltration and embedding in Hexamethylol-melamine-methyl-ether (a water soluble embedding medium) trade name “nanoplast” C) Fixation by high pressure freezing followed by freeze substitution in acetone/OsO4 prior to embedding in epon 812. In variations of methods A and B above, ruthenium red (RR, 1500 ppm) or ruthenium hexamine trichloride (RHT, 6000 ppm) were added to the primary and secondary fixatives. All tissue sections were stained in uranyl acetate and lead citrate.

Ultrastructure of the host-parasite interaction in leaves of Duchesnea indica infected by the rust fungus Frommeëla mexicana var. indicae as revealed by high pressure freezing

2001 ◽  
Vol 79 (1) ◽  
pp. 49-57 ◽  
Author(s):  
C W Mims ◽  
C Rodriguez-Lother ◽  
E A Richardson
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Pressure ◽  
Rust Fungus ◽  
Freeze Substitution ◽  
Transfer Cells ◽  
Host Cells ◽  
High Pressure Freezing ◽  
Transmission Electron ◽  
Duchesnea Indica

A combination of scanning and transmission electron microscopy was used to examine the host-pathogen relationship in leaves of Duchesnea indica (Andrz) Focke infected by the rust fungus Frommeëla mexicana var. indicae McCain & Hennen. Samples for transmission electron microscopy were prepared using high pressure freezing followed by freeze substitution. This protocol provided excellent preservation of both host cells and fungal haustoria. Each haustorium of F. mexicana var. indicae possessed a long slender neck with a neck band and an expanded body that contained two nuclei positioned close together. The haustorial body was lobed and sometimes even branched but lacked septa. Details of the extrahaustorial membrane that separated each haustorium from the cytoplasm of its host cell were particularly well preserved. Extensive labyrinth cell wall ingrowths developed around haustorial necks, as well as elsewhere, in infected cells. These ingrowths appeared to be identical to those present in plant transfer cells. Transfer cells are thought to be involved in intensive solute transfer over short distances. This appears to be the first report of the development of transfer cells in response to infection by a plant pathogenic fungus.Key words: haustoria, transfer cells, freeze substitution, electron microscopy.

Sign in / Sign up

Export Citation Format

Share Document