Frozen Resin Cracking Method for Scanning Electron Microscopy and its Application to Cytology

1972 ◽  
Vol 30 ◽  
pp. 408-409
Author(s):  
K. Tanaka ◽  
A. Iino
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Epoxy Resin ◽  
Osmium Tetroxide ◽  
New Method ◽  
List Type ◽  
Freeze Fracturing ◽  
Tissue Sections ◽  
Scanning Electron ◽  
Intracellular Structure

Until recently, a few reports have been published as to the methods for observing intracellular structure by means of scanning electron microscopy. Makita and Sandborn saw intracellular granules in the glands of the hen oviduct with tissue sections by means of Smith-Farquhar tissue sectioner. Geminario and McAlear applied the freeze-fracturing technique in order to ascertain the intracellular structure of retinas from mice.A new method, attempted by us, embedding the materials in epoxy resin and cracking it into two pieces after freezing, is described below with its application to cytology.1. The pieces of tissue are fixed in glutaraldehyde and osmium tetroxide.2. They are dehydrated by graded series of ethanol and propylen oxide.3. Then they are embedded in small gelatin capsules (size no. 2) which are filled with Cemedine 1500 (epoxy resin) without any catalysts (Epon 812 or Rigolac can be used but the temperature for hardening them is very low, -80°C).

Spontaneous Cataract in Nude Athymic Mice

1977 ◽  
Vol 35 ◽  
pp. 512-513
Author(s):  
Ronald H. Bradley ◽  
R. S. Berk ◽  
L. D. Hazlett
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Nude Mouse ◽  
Cellular Immunity ◽  
Phosphate Buffer ◽  
Osmium Tetroxide ◽  
Athymic Mice ◽  
Transmission Microscopy ◽  
Mouse Lens ◽  
Scanning Electron

The nude mouse is a hairless mutant (homozygous for the mutation nude, nu/nu), which is born lacking a thymus and possesses a severe defect in cellular immunity. Spontaneous unilateral cataractous lesions were noted (during ocular examination using a stereomicroscope at 40X) in 14 of a series of 60 animals (20%). This transmission and scanning microscopic study characterizes the morphology of this cataract and contrasts these data with normal nude mouse lens.All animals were sacrificed by an ether overdose. Eyes were enucleated and immersed in a mixed fixative (1% osmium tetroxide and 6% glutaraldehyde in Sorenson's phosphate buffer pH 7.4 at 0-4°C) for 3 hours, dehydrated in graded ethanols and embedded in Epon-Araldite for transmission microscopy. Specimens for scanning electron microscopy were fixed similarly, dehydrated in graded ethanols, then to graded changes of Freon 113 and ethanol to 100% Freon 113 and critically point dried in a Bomar critical point dryer using Freon 13 as the transition fluid.

Scanning and Transmission Microscopy of Nematocyst Batteries in Epitheliomuscular Cells of Hydra

1971 ◽  
Vol 29 ◽  
pp. 410-411 ◽  
Author(s):  
Jane A. Westfall ◽  
S. Yamataka ◽  
Paul D. Enos
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Osmium Tetroxide ◽  
External Surface ◽  
Three Dimensional ◽  
Surface Structures ◽  
Transmission Microscopy ◽  
Transmission Electron ◽  
Freeze Dried ◽  
Scanning Electron

Scanning electron microscopy (SEM) provides three dimensional details of external surface structures and supplements ultrastructural information provided by transmission electron microscopy (TEM). Animals composed of watery jellylike tissues such as hydras and other coelenterates have not been considered suitable for SEM studies because of the difficulty in preserving such organisms in a normal state. This study demonstrates 1) the successful use of SEM on such tissue, and 2) the unique arrangement of batteries of nematocysts within large epitheliomuscular cells on tentacles of Hydra littoralis.Whole specimens of Hydra were prepared for SEM (Figs. 1 and 2) by the fix, freeze-dry, coat technique of Small and Màrszalek. The specimens were fixed in osmium tetroxide and mercuric chloride, freeze-dried in vacuo on a prechilled 1 Kg brass block, and coated with gold-palladium. Tissues for TEM (Figs. 3 and 4) were fixed in glutaraldehyde followed by osmium tetroxide. Scanning micrographs were taken on a Cambridge Stereoscan Mark II A microscope at 10 KV and transmission micrographs were taken on an RCA EMU 3G microscope (Fig. 3) or on a Hitachi HU 11B microscope (Fig. 4).

Criteria for the evaluation of low-temperature Scanning Electron Microscopy

1986 ◽  
Vol 44 ◽  
pp. 902-903
Author(s):  
Alan Beckett
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Low Temperature ◽  
Conformational Changes ◽  
Chemical Vapour ◽  
List Type ◽  
Dimensional Changes ◽  
Critical Point Drying ◽  
Temperature Scanning ◽  
Scanning Electron

Low temperature scanning electron microscopy (LTSEM) has been evaluated with special reference to its application to the study of morphology and development in microorganisms. A number of criteria have been considered and have proved valuable in assessing the standard of results achieved. To further aid our understanding of these results, it has been necessary to compare those obtained by LTSEM with those from more conventional preparatory procedures such as 1) chemical fixation, dehydration and critical point-drying; 2) freeze-drying with or without chemical vapour fixation before hand.The criteria used for assessing LTSEM for the above purposes are as follows: 1)Specimen immobilization and stabilization2)General preservation of external morphology3)General preservation of internal morphology4)Exposure to solvents5)Overall dimensional changes6)Cell surface texture7)Differential conformational changes8)Etching frozen-hydrated material9)Beam damage10)Specimen resolution11)Specimen life

The External Morphology of the Eggs of Culex (Culex) saltanensis (Diptera: Culicidae) Under Scanning Electron Microscopy

2020 ◽  
Author(s):  
J R Santos-Mallet ◽  
T D Balthazar ◽  
A A Oliveira ◽  
W A Marques ◽  
A Q Bastos ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Optical Microscopy ◽  
Osmium Tetroxide ◽  
Neotropical Region ◽  
External Morphology ◽  
Metal Supports ◽  
Scanning Electron

Abstract The aim of the present study was to describe the morphology of the eggs of Culex (Culex) saltanensis Dyar that occurs in the Neotropical region. Eggs of the Cx. (Cux.) saltanensis were collected at the Mata Atlântica FIOCRUZ campus, fixed in 1% osmium tetroxide, prepared for mounting on metal supports, observed under a scanning electron microscope, and described morphologically. The eggs had a coniform shape with a length of approximately 0.5 mm (505–510 µm) and a width in the median portion of 117 µm (113–123 µm). Upper portion is lined with tubers of irregular shape and varying sizes (0.64–1.31 µm), located on a cross-linked matrix forming bands observed under optical microscopy. The micropyle is encased in a necklace of approximately 6.6-µm plates arranged in a flower-like shape. Comparing Cx. (Cux.) saltanensis eggs with several species of different genera, important divergent characteristics can be observed. However, this study points to the need for new descriptions of eggs of species belonging to the same subgenus in order to analyze if there will be differences between them. Culex (Cux.) saltanensis eggs have particular characteristics not observed in eggs of other Culicidae genera.

Field Emission Scanning Electron Microscopy Of Mouse Cerebellar Synaptic Contacts

2000 ◽  
Vol 6 (S2) ◽  
pp. 844-845
Author(s):  
O.J. Castejón ◽  
R. P. Apkarian ◽  
H. V. Castejón
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Field Emission ◽  
Cerebellar Cortex ◽  
Osmium Tetroxide ◽  
Phosphate Buffer Solution ◽  
Buffer Solution ◽  
Solution Ph ◽  
Osmium Tetroxide Solution ◽  
Scanning Electron

Samples of albino mice cerebellar cortex were processed by the cryofracture method for scanning electron microscopy and examined with the field emission scanning electron microscope (FESEM). Albino mouse cerebellar cortex was excised, cut into 1-2 mm slices and inmersed in 4% glutaraldehyde in O. l M phosphate buffer solution, pH 7.4, for 24h at 4°C; and postfixed for 1 h in a similarly buffered 1% osmium tetroxide solution. Specimens were dehydrated in a graded serie of ethanol (30, 50, 70, 80, 90 2x100%) prior to wrapping individual tissue pieces in preformed absolute ethanol filled parafilm cryofracture packets. Rapid freezing of packets was performed by plunging into LN2. First, the packet was transferred from the LN2 storage vessel with LNT chilled forceps in order to avoid themial damage. Secondly, the cooled fracture blade was removed from the LN2, the packet was orientated under the blade, and immediately struck with a heavy tool.

scholarly journals C-S-H Pore Size Characterization Via a Combined Nuclear Magnetic Resonance (NMR)–Scanning Electron Microscopy (SEM) Surface Relaxivity Calibration

Materials ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1779 ◽  
Author(s):  
Christoph Naber ◽  
Florian Kleiner ◽  
Franz Becker ◽  
Long Nguyen-Tuan ◽  
Christiane Rößler ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Nuclear Magnetic Resonance ◽  
Magnetic Resonance ◽  
Ion Beam ◽  
New Method ◽  
Sem Images ◽  
Surface Relaxivity ◽  
Scanning Electron ◽  
Nuclear Magnetic

A new method for the nuclear magnetic resonance (NMR) surface relaxivity calibration in hydrated cement samples is proposed. This method relies on a combined analysis of 28-d hydrated tricalcium silicate samples by scanning electron microscopy (SEM) image analysis and 1H-time-domain (TD)-NMR relaxometry. Pore surface and volume data for interhydrate pores are obtained from high resolution SEM images on surfaces obtained by argon broad ion beam sectioning. These data are combined with T2 relaxation times from 1H-TD-NMR to calculate the systems surface relaxivity according to the fast exchange model of relaxation. This new method is compared to an alternative method that employs sequential drying to calibrate the systems surface relaxivity.

Sign in / Sign up

Export Citation Format

Share Document