Dynamic Scanning Electron Microscopy of Small Particles

Author(s):  
W. Krakow ◽  
W. C. Nixon

The scanning electron microscope (SEM) can be run at television scanning rates and used with a video tape recorder to observe dynamic specimen changes. With a conventional tungsten source, a low noise TV image is obtained with a field of view sufficient to cover the area of the specimen to be recorded. Contrast and resolution considerations have been elucidated and many changing specimens have been studied at TV rates.To extend the work on measuring the magnitude of charge and field distributions of small particles in the SEM, we have investigated their motion and electrostatic interaction at TV rates. Fig. 1 shows a time sequence of polystyrene spheres on a conducting grating surface inclined to the microscope axis. In (la) there are four particles present in the field of view, while in (lb) a fifth particle has moved into view.

1997 ◽  
Vol 3 (S2) ◽  
pp. 1193-1194
Author(s):  
Brendan J. Griffin

Most scanning electron microscopy is performed at low magnification; applications utilising the large depth of field nature of the SEM image rather than the high resolution aspect. Some environmental SEMs have a particular limitation in that the field of view is restricted by a pressure limiting aperture (PLA) at the beam entry point of the specimen chamber. With the original ElectroScan design, the E-3 model ESEM utilised a 500 urn aperture which gave a very limited field of view (∼550um diameter at a 10mm working distance [WD]). An increase of aperture size to ∼lmm provided an improved but still unsatisfactory field of view. The simplest option to increase the field of view in an ESEM was noted to be a movement of the pressure and field, limiting aperture back towards the scan coils1. This approach increased the field of view to ∼2mm, at a 10mm WD. A commercial low magnification device extended this concept and indicated the attainment of conventional fields of view.


Fibers ◽  
2020 ◽  
Vol 8 (5) ◽  
pp. 31 ◽  
Author(s):  
Renata Fortini ◽  
Asmus Meyer-Plath ◽  
Dominic Kehren ◽  
Ulrich Gernert ◽  
Leonardo Agudo Jácome ◽  
...  

In this work the flexural rigidity of individual large diameter multi-walled carbon nanotubes (MWCNTs) was investigated. The bending modulus were obtained by detecting the resonance frequencies of mechanically excited cantilevered carbon nanotubes using the so-called dynamic scanning electron microscopy technique, and applying the Euler–Bernoulli beam theory. For the nanotubes studied, we determined a modulus of up to 160 GPa. This agrees with values reported by other authors for MWCNTs produced by catalytic chemical vapor deposition, however, it is 6-8 times smaller than values reported for single and multi-walled carbon nanotubes produced by arc-discharge synthesis. Toxicological studies with carbon nanotubes have been showing that inhaled airborne nanofibers that reach the deep airways of the respiratory system may lead to serious, asbestos-like lung diseases. These studies suggested that their toxicity critically depends on the fiber flexural rigidity, with high rigidity causing cell lesions. To complement the correlation between observed toxicological effects and fiber rigidities, reliable and routinely applicable measurement techniques for the flexural rigidity of nanofibers are required.


1997 ◽  
Vol 7 (2) ◽  
pp. 3231-3234 ◽  
Author(s):  
R. Gerber ◽  
T. Nissel ◽  
H.-G. Wener ◽  
A. Willmann ◽  
S. Keil ◽  
...  

Author(s):  
W.C. Nixon

A special form of two lens scanning electron microscope has been optimised for scanning at television rates and used with a video tape recorder to observe a wide variety of dynamic specimen changes. The electron gun uses either thermionic tungsten or lanthanum hexaboride emitters giving low noise TV images with a beam current of 100 nA in an electron probe that can be as small as 300 A. Special stages may be used for dynamic microcircuit voltage contrast, mechanical motion such as ball bearing rotation, material testing in tension, compression and shear, and certain biological specimens such as human skin viewed directly in situ.


2019 ◽  
Vol 29 (5) ◽  
pp. 685-692
Author(s):  
Francesco Ippoliti ◽  
Fernando Piscioneri ◽  
Patrizio Sartini ◽  
Mariangela Peruzzi ◽  
Marina Di Domenico ◽  
...  

Abstract OBJECTIVES Reports ranged from mixed to marginal tubing wear and spallation effects as a complication of roller pumps in cardiopulmonary bypass (CPB). Because the rollers constantly compress part of the tubing, we sought to determine whether circuit materials behave differently under a 3-h simulation of CPB. METHODS Two different tubing materials (silicone and Tygon) were tested with a customized experimental circuit, designed to allow in vitro simulation of CPB with priming volumes, pressures, revolutions per minute and temperatures equivalent to the clinical scenario. Samples were analysed with optical and field-emission scanning electron microscopy. We collected 200-ml fluid samples at 4 different times: before starting the CPB (T0), when the predicted revolutions per minute corresponded to about 2 min of CPB (T1), at 90 min (T2) and at 180 min (T3). At the end of CPB, we harvested 2 samples of tubing. Lastly, optical investigations and field-emission scanning electron microscopy observations were used for qualitative and quantitative analysis of circulating fragments. RESULTS T2 and T3 fluid samples showed more particles than T1 samples. Significant differences in terms of particle numbers were detected: silicone tubing released more fragments per millilitre than Tygon tubing, with both materials releasing particles from 5 to 500 µm. Silicone tubing was associated with a time-dependent increase in small particles released (P = 0.04), whereas this did not apply to large particles or to Tygon tubing. Yet, bootstrap estimates suggested that silicone tubing was associated with the release of more small particles whereas Tygon tubing released more large particles (both P < 0.01). Unlike silicone, Tygon samples taken from the portion of the circuit not subjected to the action of the roller pump did not show any erosion on their surfaces. Samples of both materials taken from the portion subjected to the compression of the roller pump showed signs of significant deterioration. CONCLUSIONS Silicone showed a worse spallation performance than Tygon, thus appearing less safe for more complex surgery of prolonged duration or for patients with a prior cerebral ischaemic event. Additional risk and cost-effectiveness comparisons to determine the potential benefits of one type of tubing material over the other are warranted to further expand our findings.


1998 ◽  
Vol 4 (S2) ◽  
pp. 160-161
Author(s):  
Dale E. Newbury ◽  
David S. Bright

Compositional mapping with energy dispersive x-ray spectrometry (EDS) in the scanning electron microscope (SEM) is one of the most widely used techniques for elemental imaging of microstructures. SEM/EDS maps are usually qualitative presentations of elemental distributions in x-y space. In older implementations of mapping, the x-ray intensity from a single spectral region of interest (ROI) above a threshold was recorded on film as a white “dot” during analog scanning. With modem digital control and data recording, x-ray intensities from many ROIs can be recorded in parallel and true counts stored in memory. For display purposes a gray level or color value is used to represent the stored x-ray intensity at each pixel. For major constituents (arbitrarily, major >10%), it is generally possible to make valid, robust comparisons between regions within an individual compositional map, but comparisons may be problematic among several maps of different constituents within the same field of view, depending on the sophistication of the mapping software.


Sign in / Sign up

Export Citation Format

Share Document