First-Surface Scintillator for Low Accelerating Voltage Scanning Electron Microscopy (SEM) Imaging

Highly luminescent thin films of zinc tungstate (ZT) have been deposited on top of conventional scintillators (Yttrium Aluminum Perovskite, Yttrium Aluminum Garnet) for electron detection in order to replace the need for a top conducting layer, such as indium tin oxide (ITO) or aluminum, which is non-scintillating and electron absorbing. Such conventional conducting layers serve the single purpose of eliminating electrical charge build-up on the scintillator. The ZT film also eliminates charging, which has been verified by measuring the Duane–Hunt limit and electron emission versus accelerating voltage. The luminescent nature of the ZT film ensures effective detection of low energy electrons from the very top surface of the structure ZT/scintillator, which we call “first-surfacescintillator”. The cathodoluminescence has been measured directly with a photodetector and spectrally resolved at different accelerating voltages. All results demonstrate the extended range of operation of the first-surface scintillator, while the conventional scintillators with a top ITO layer decline below 5 kV and have practically no output below 2 kV. Scintillators of different types were integrated in a detection system for backscattered electrons (BSE). The quality of the image at high accelerating voltages is comparable with the conventional scintillator and commercial BSE detector, while the image quality at 1 kV from the first-surface scintillator is superior.