scholarly journals Overcoming Severe XEDS Peak Overlaps with the AEM

2006 ◽  
Vol 14 (2) ◽  
pp. 34-37
Author(s):  
Scott D. Walck
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Electron Microscope ◽  
Energy Dispersive Spectroscopy ◽  
Analytical Techniques ◽  
Maximum Energy ◽  
X Ray ◽  
Analytical Electron ◽  
Analytical Electron Microscope ◽  
Scanning Electron

Of all the analytical techniques in electron microscopy, X-ray energy dispersive spectroscopy (XEDS) is perhaps the most useful. It provides a quick identification of the elements and even with semiquantitative methods; a reasonable composition can be obtained. However, in the scanning electron microscopy (SEM), there are materials systems in which severe peak overlaps of heavier elements L and M lines cannot be easily deconvolved with lighter elements' K lines. In addition, without a sufficient overvoltage in the SEM, even identification of the heavier elements can be difficult. In the analytical electron microscope (AEM), there is always sufficient overvoltage to excite all of the elements' K-lines. However, all of the K-lines might not be able to be detected with commercially available instruments. This is illustrated in Fig.l where the maximum energy of the detector system might be set to 10, 20, or 40 keV.

scholarly journals Analytical study of Buddha sculptures in Jingyin temple of Taiyuan, China

2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Xiaojian Bai ◽  
Chen Jia ◽  
Zhigen Chen ◽  
Yuxuan Gong ◽  
Huwei Cheng ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Analytical Study ◽  
Energy Dispersive Spectrometry ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Ancient China ◽  
X Ray ◽  
Unique Style ◽  
Scanning Electron

AbstractWith exquisite design and unique style, the painted sculptures of Tutang Buddha and two attendants Buddha in Jingyin Temple are precious cultural heritages of China. The sculpture of Tutang Buddha, which was carved from a mound and painted by ancient craftsmen, was rarely found in ancient China. However, due to natural and human factors, the sculptures were severely damaged. Obviously, they require urgent and appropriate protection and restoration. In this study, samples taken from the sculptures were analysed through multiple analytical techniques, including scanning electron microscopy with energy dispersive spectrometry (SEM–EDS), Raman spectroscopy, X-ray diffraction (XRD), optical microscopy (OM) and granulometry. The analysis results enable us to infer the techniques used by the craftsmen in making the sculptures and provide a reliable evidence for the conservation and future protection of these and similar sculptures.

scholarly journals The use of scanning electron microscopy to the study of the painting from the Church in Radcze

2013 ◽  
Vol 12 (4) ◽  
pp. 095-105
Author(s):  
Beata Klimek
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Electron Microscope ◽  
Historic Buildings ◽  
X Ray ◽  
Composition And Structure ◽  
The Church ◽  
Diagnosis Technique ◽  
Scanning Electron

One of the main tasks in the study of historic buildings is the need to identify the original materials and extensions, which often have historic character. The next task concerns the determination of the composition and structure of the historical, diagnosis technique to develop original paint. The article presents the preliminary results of paintings. Methods were used with the scanning electron microscope was equipped with an energy dispersive X-ray spectrometer (SEM-EDS).

Analytical Formulae for Calculation of X-Ray Detector Solid Angles in the Scanning and Scanning/Transmission Analytical Electron Microscope

2014 ◽  
Vol 20 (4) ◽  
pp. 1318-1326 ◽  
Author(s):  
Nestor J. Zaluzec
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
Solid Angle ◽  
Analytical Electron Microscopy ◽  
X Ray ◽  
Analytical Electron ◽  
Analytical Electron Microscope ◽  
Scanning Transmission ◽  
Analytical Formulae ◽  
Detector Configurations

AbstractClosed form analytical equations used to calculate the collection solid angle of six common geometries of solid-state X-ray detectors in scanning and scanning/transmission analytical electron microscopy are presented. Using these formulae one can make realistic comparisons of the merits of the different detector geometries in modern electron column instruments. This work updates earlier formulations and adds new detector configurations.

Preparation of Pd /α–Al2O3 and Pd-Ag/α–Al2O3 Membranes by Electroless Plating and Permeation Measurements

2012 ◽  
Vol 1372 ◽  
Author(s):  
L. Ortiz-Martínez ◽  
M. Torres-Rodríguez ◽  
M. Gutiérrez-Arzaluz
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Electroless Plating ◽  
Energy Dispersive Spectroscopy ◽  
Ceramic Composite ◽  
Composite Membranes ◽  
X Ray Diffraction ◽  
X Ray ◽  
Α Al2o3 ◽  
Scanning Electron

ABSTRACTIn this work, the synthesis of dense Pd/α–Al2O3 and Pd-Ag/α–Al2O3 ceramic composite membranes was done through the sequential electroless plating technique of Pd and Ag. The precursors are solutions of PdCl2 and AgNO3 and N2H4 salts, as reducing agent. The membranes were characterized by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Energy Dispersive Spectroscopy (EDS). The permeation tests of H2 and N2 was carried out at 20 psi of pressure and at 25°C, resulted πH2=5.2x10-9 mol H2/m2·s·Pa and πN2=8.2x10-10 mol N2/m2·s·Pa.

scholarly journals Understanding the Mechanism of Arsenic Mobilisation and Behaviour in Tailings Dams

2017 ◽  
Vol 17 (1) ◽  
pp. 85-89
Author(s):  
B. Koomson ◽  
E. K. Asiam ◽  
W. Skinner ◽  
J. Addai-Mensah
Keyword(s):  
Electron Microscopy ◽  
Heavy Metals ◽  
Scanning Electron Microscopy ◽  
Chemical Composition ◽  
Energy Dispersive Spectroscopy ◽  
X Ray ◽  
Tailings Dams ◽  
Higher Temperature ◽  
Lower Temperature ◽  
Scanning Electron

This study was carried out on leaching of tailings at 30 ᵒC and 40 ᵒC. The mineralogical and chemical composition of the tailings material were determined by Quantitative X-Ray Diffractometry (QXRD) and Scanning Electron Microscopy combined with Energy Dispersive Spectroscopy (SEM-EDAX). The study revealed that the tailings contain sulphides (arsenopyrite and pyrite) which can leach to produce arsenic (As) and other ions in solution. The acid released during leaching depends on the temperature of leaching. More acid was produced at higher temperature (40 ᵒC) than lower temperature (30 ᵒC). It was established that arsenic precipitation from solution was higher at higher temperature (40 ᵒC) than lower temperature (30 ᵒC). Mimicking the study in a typical tailings environment, it could be proposed that As mobilisation will be enhanced at lower temperature (30 ᵒC) than at higher temperature (40 ᵒC). Keywords: Tailings, Leaching, Arsenopyrite, Heavy metals and Temperature

scholarly journals Analytical Study of Buddha Sculptures in Jingyin Temple of Taiyuan, China

2020 ◽  
Author(s):  
Xiaojian Bai ◽  
Chen Jia ◽  
Zhigen Chen ◽  
Yuxuan Gong ◽  
Huwei Cheng ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Analytical Study ◽  
Energy Dispersive Spectrometry ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Ancient China ◽  
X Ray ◽  
Unique Style ◽  
Scanning Electron

Abstract With exquisite design and unique style, the painted sculptures of Tutang Buddha and two attendants Buddha in Jingyin Temple are precious cultural heritages of China. The sculpture of Tutang Buddha, which was carved from a mound and painted by ancient craftsmen, was rarely found in ancient China. However, due to natural and human factors, the sculptures were severely damaged. Obviously, they require urgent and appropriate protection and restoration. In this study, samples taken from the sculptures were analysed through multiple analytical techniques, including scanning electron microscopy with energy dispersive spectrometry (SEM-EDS), Raman spectroscopy, X-ray diffraction (XRD), optical microscopy (OM) and granulometry. The analysis results enable us to infer the techniques used by the craftsmen in making the sculptures and provide a reliable evidence for the conservation and future protection of these and similar sculptures.

Fabrication of g-C3N4/Y-TiO2 Z-scheme heterojunction photocatalysts for enhanced photocatalytic activity

2021 ◽  
Author(s):  
SongSik Pak ◽  
KwangChol Ri ◽  
Chenmin Xu ◽  
Qiuyi Ji ◽  
Dunyu Sun ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Photocatalytic Activity ◽  
Electron Microscope ◽  
Photoelectron Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

The g-C3N4/Y-TiO2 Z-scheme heterojunction photocatalysts were successfully synthesized. The powder X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscope, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy were used for...

Sign in / Sign up

Export Citation Format

Share Document