A miniaturized dual band EBG unit cell for UWB antennas with high selective notching

2019 ◽  
Vol 11 (10) ◽  
pp. 1035-1043 ◽  
Author(s):  
Mahmoud A. Abdalla ◽  
Abdullah A. Al-Mohamadi ◽  
Ibrahim S. Mohamed
Keyword(s):  
Band Gap ◽  
Unit Cell ◽  
Ultra Wideband ◽  
Dual Band ◽  
Circuit Modeling ◽  
Electromagnetic Band Gap ◽  
Uwb Antennas ◽  
Antenna Performance ◽  
Full Wave

AbstractA high selective dual band and miniaturized electromagnetic band gap (EBG) unit cell is presented in this paper. The analysis and characterization of the new cell are explained. The modified compact EBG unit cell is based on cutting two inverted U-shaped slots inside the typical mushroom-like EBG. The modified EBG has a 70% size reduction. The dual-band functionality of the structure is confirmed by applying it in a dual-notch ultra-wideband antenna (3.1–10.6 GHz), and the notch frequencies are 5.2 and 5.8 GHz. The dual-band functionality has advantages of a highly selective bandpass between them. The antenna can suppress interference frequencies in less than 100 MHz bandwidth without affecting the antenna performance in the whole bandwidth. Presented results are addressed in terms of circuit modeling, 3D full-wave simulations, and measurements.

scholarly journals Dual Band-Notched UWB Antenna based on Electromagnetic Band Gap Structures

2011 ◽  
Vol 1 (2) ◽  
Author(s):  
Son Trinh-Van ◽  
Chien Dao-Ngoc
Keyword(s):  
Band Gap ◽  
Frequency Band ◽  
Stop Band ◽  
Ultra Wideband ◽  
Dual Band ◽  
Uwb Antenna ◽  
Directional Characteristic ◽  
Electromagnetic Band Gap ◽  
Final Design ◽  
Good Agreement

A printed ultra-wideband (UWB) antenna with dual band-notched characteristics based on electromagnetic band-gap (EBG) structure is presented. To produce dual-band rejection, the microstrip feed line is placed between two pairs of EBG cells which are designed to act as stop-band filters. The final design of the antenna satisfies the voltage standing wave ratio (VSWR) requirement of less than 2.0 in a bandwidth spreading from 2.275 GHz to 10.835 GHz, which entirely covers UWB frequency band allocated from 3.1 to 10.6 GHz. The antenna also shows dual band-notched performance at the frequency bands of 3.375 − 3.875 GHz for WiMAX and 5.325 − 6.150 GHz for WLAN, while possessing omni-directional characteristic in the whole operating frequency band. The results show good agreement between simulation and measurement.

Enhanced Ultra-Wideband (UWB) Circular Monopole Antenna with Electromagnetic Band Gap (EBG) Surface and Director

2014 ◽  
Author(s):  
Amir I. Zaghloul ◽  
Youn M. Lee ◽  
Gregory A. Mitchell ◽  
Theodore K. Anthony
Keyword(s):  
Band Gap ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Electromagnetic Band Gap

scholarly journals Characterization of Tiled Architecture for C-Band 1-Bit Beam-Steering Transmitarray

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1259
Author(s):  
Dmitry Kozlov ◽  
Irina Munina ◽  
Pavel Turalchuk ◽  
Vitalii Kirillov ◽  
Alexey Shitvov ◽  
...  
Keyword(s):  
Communication Systems ◽  
Beam Steering ◽  
Unit Cell ◽  
Electromagnetic Simulations ◽  
Fifth Generation ◽  
Full Wave ◽  
Array Architecture ◽  
Modulation Pattern ◽  
Good Agreement

A new implementation of a beam-steering transmitarray is proposed based on the tiled array architecture. Each pixel of the transmitarray is manufactured as a standalone unit which can be hard-wired for specific transmission characteristics. A set of complementary units, providing reciprocal phase-shifts, can be assembled in a prescribed spatial phase-modulation pattern to perform beam steering and beam forming in a broad spatial range. A compact circuit model of the tiled unit cell is proposed and characterized with full-wave electromagnetic simulations. Waveguide measurements of a prototype unit cell have been carried out. A design example of a tiled 10 × 10-element 1-bit beam-steering transmitarray is presented and its performance benchmarked against the conventional single-panel, i.e., unibody, counterpart. Prototypes of the tiled and single-panel C-band transmitarrays have been fabricated and tested, demonstrating their close performance, good agreement with simulations and a weak effect of fabrication tolerances. The proposed transmitarray antenna configuration has great potential for fifth-generation (5G) communication systems.

scholarly journals Performance Evaluation of Meander Line Implantable Antenna integrated with EBG Based Ground for Anatomical Realistic Model

2019 ◽  
Vol 18 (1) ◽  
pp. 1-10
Author(s):  
Sadia Sultana ◽  
Rinku Basak
Keyword(s):  
Band Gap ◽  
Ground Plane ◽  
Wide Band ◽  
Realistic Model ◽  
Radiation Mechanism ◽  
Electromagnetic Band Gap ◽  
Antenna Performance ◽  
Human Models ◽  
Implantable Antenna ◽  
Meander Line

A unique design and meander line implantable antenna is examined in this paper which satisfies the requirements of ultra-wide band. The designed antenna is integrated with the electromagnetic band gap (EBG) structure based ground plane to enhance the performance. Rectangular electromagnetic band gap (EBG) structures are represented here to evaluate the antenna performance. This compact and efficient MLA antenna is applied to improve the antenna performance for numerous implantable scenarios and biomedical applications. The proposed antenna with EGB ground plane is designed for both the simplified model and anatomical realistic models for the human body and executed the performance in bio-environment. To approve the results of implantable antennas more correctly, simulation is analyzed using anatomical realistic human models. The ultimate design has the whole dimension is 15.2 x 8.8 m2. The thickness of the antenna is about 0.8 mm. FR4 is chosen as the substrate material and Copper is chosen as the patch material. The antenna is enclosed biocompatible material with silicon inside the tissue in order to protect patient safety. Significant parameters such as S11 parameter, Far field (radiation pattern), VSWR, Efficiency, Directivity, Gain of the proposed antenna have calculated and measured the performance both the simplified and realistic human models. Comparison Analysis of S11 parameter for different substrate materials and patch materials have observed. The radiation mechanism and modified design of the implantable antenna reducing Specific Absorption Rate (SAR) for safety issues. All the simulation results and measurements are obtained from CST Microwave Studio to validate the design.

scholarly journals Design of Two Novel Dual Band-Notched UWB Antennas

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Bing Li ◽  
Jing-song Hong
Keyword(s):  
Time Domain ◽  
Simple Structure ◽  
The Other ◽  
Ultra Wideband ◽  
Dual Band ◽  
Uwb Antennas ◽  
Monopole Antennas ◽  
Printed Monopole ◽  
The Difference ◽  
The Time Domain

Two novel dual band-notched ultra-wideband (UWB) printed monopole antennas with simple structure and small size are presented. The size of both antennas is25×25×0.8 mm3. The bandwidth of one of the proposed antenna can be from 2.7 GHz to 36.8 GHz, except the bandwidth of 3.2–3.9 GHz for WiMAX applications and 5.14–5.94 GHz for WLAN applications. The bandwidth of the other is ranging for 2.7 to 41.1 GHz, except the bandwidth of 3.2–3.9 GHz for WiMAX applications and 4.8–5.9 GHz for WLAN applications. Bandwidths of the antennas are about 512% and 455% wider than those of conventional band-notched UWB antennas, respectively. In addition, the time-domain characteristics of the two antennas are investigated to show the difference between both antennas.

Sign in / Sign up

Export Citation Format

Share Document